Thermochemical properties of benzoic acid derivatives VIII. Enthalpies of combustion and formation of o-, m-, and p- t-butylbenzoic acids

The enthalpies of formation in the crystalline state at 298.15 K of o-, m-, and p-t-butyl-benzoic acids have been determined by static-bomb calorimetry. Vapour-pressure determinations were made by the Knudsen-effusion technique and the sublimation enthalpies at the mean temperatures of the measurement ranges have been derived for the three acids. The values obtained are:

     

42.

Thermal characterization of UHMWPE stabilized with natural antioxidants     

M. Peltzer  J. R. Wagner  A. Jiménez 《Journal of Thermal Analysis and Calorimetry》2007,89(2):493-497

This work presents a study of the thermal degradation of ultra-high molecular mass polyethylene (UHMWPE) stabilized with natural (α-tocopherol and carvacrol) and synthetic antioxidants. Thermogravimetric analysis in dynamic mode was used to determine the apparent activation energies of different samples. The stabilization of UHMWPE with low concentrations (around 0.3%) of α-tocopherol is enough to obtain an efficient thermal performance of the polymer. Carvacrol is also a good stabilizer for UHMWPE, but at higher concentration than in the case of α-tocopherol. The comparison of apparent activation energy between samples with natural and synthetic antioxidants in similar concentration shows that α-tocopherol is a better stabilizer in terms of their thermal performance.     

43.

Reactions of tetracarbonylcobaltate(-I) with chlorosilanes in ether solvents     

Brian K. Nicholson  Jim Simpson 《Journal of organometallic chemistry》1978,155(2):237-244

The reactions of NaCo(CO)₄ with Me_nSiCl_4?n (n = 0–3) in diethylether (Et₂O) and in tetrahydrofuran (THF) have been studied. Three distinct reaction pathways were recognised which depend on the acidity of the chlorosilane and basicity of solvent. Attack at the silicon centre via the Co atom of Co(CO)₄^? leads to formation of a SiCo bond; reaction involving a CO ligand of Co(CO)₄^? gives clusters R₃SiOCCo₃(CO)₉; and chlorosilane induced attack of Co(CO)₄^? on the solvent gives products derived from THF molecules.     

44.

Effect of oxidative stabilization on the electrochemical performance of carbon mesophases as electrode materials for lithium batteries     

A. Concheso  R. Santamaría  R. Menéndez  J. M. Jiménez-Mateos  R. Alcántara  P. Lavela  J. L. Tirado 《Journal of Solid State Electrochemistry》2005,9(9):627-633

The effect of oxidative stabilization as a mean to modify the carbon texture was essayed in a group of mesophases previous to carbonization at 900 °C with the aim of evaluating the influence on electrochemical performance when used as electrode materials in lithium test cells. X-ray diffraction, optical microscopy and chemical analysis, Fourier-transform infrared spectroscopy have been used to describe the compositional and textural properties of the as-produced parent mesophases, the samples were further treated under air current to stabilize their microstructures and the corresponding carbonized samples at 900 °C. The electrochemical performance was determined by the galvanostatic method and further correlated to the physical–chemical properties and interface resistance of the materials. In all cases, the stabilization process has demonstrated a beneficial effect on the capacity retention in the measured range.     

45.

A convenient enantioselective synthesis of (S)-alpha-trifluoromethylisoserine     

Avenoza A  Busto JH  Jiménez-Osés G  Peregrina JM 《The Journal of organic chemistry》2005,70(14):5721-5724

[reaction: see text] This report describes two straightforward synthetic methodologies to obtain alpha-CF3-isoserine, a new alpha,alpha-disubstituted beta-amino acid, from alpha-(trifluoromethyl)acrylic acid. The routes involve the synthesis of five-membered cyclic sulfates (using sulfuryl chloride) or sulfamidates (using the Burgess reagent) from the corresponding chiral diols, which are obtained by a catalytic asymmetric dihydroxylation (AD) reaction.     

46.

Electrodeposition of cobalt on stainless steel foils. Preparation of57Co sources for Mössbauer experiments     

R. González-Ramírez  H. Jiménez-Domínguez  O. Solorza-Feria  E. Ordóñez-Regil  A. Cabral-Prieto  S. Bulbulian 《Journal of Radioanalytical and Nuclear Chemistry》1993,174(2):291-298

Conditions for the electrodeposition of⁵⁹Co and⁵⁷Co on stainless steel foils have been studied. A set of electrolytic parameters has been determined to get a reasonably good electrodeposited sample. The⁵⁷Co electrodeposited foil was then introduced in a quartz tube to be annealed in an argon flow. The final product was a 11 Ci Mössbauer source for college experiments which was succesfully tested by obtaining spectra of stainless steel and sodium nitroprusside.     

47.

Differential pulse polarographic determination of salicylaldehyde as its Girard-P derivative     

Luís J. Moreno López  Manuel Callejón Mochón  Juán C. Jiménez Sánchez  Alfonso Guiraúm Pérez 《Mikrochimica acta》1996,124(3-4):187-194

A method for the determination of salicylaldehyde (2 × 10^–6–10^–4 M) by differential-pulse polarography, based on the in situ formation of its Girard-P derivative in aqueous solution at pH 2.5, is proposed. The relative standard deviation was 1.5% (ten determinations of 4 × 10^–5 M level). The applicability of this method was checked in synthetic samples containing salicyl alcohol,o-aminophenol, 2-methylphenol, salicylic acid and 4-aminobenzoic acid.     

48.

Innovations in high-pressure liquid injection technique for gas chromatography: pressurized liquid injection system     

Luong J  Gras R  Tymko R 《Journal of chromatographic science》2003,41(10):550-559

In gas chromatography (GC), highly volatile liquefied hydrocarbons are commonly injected using devices such as high-pressure syringes, piston valves, liquid rotary sampling valves, or vaporizing regulators. Although these techniques are adequate in some cases, there are known deficiencies. A new generation of sampling valve has been recently innovated and commercialized. Some of the highlights of the pressurized liquid injection system (PLIS) include compact size, the capability to directly couple to an injection port without the need for preinjection vaporization and transfer lines, and sample sizes ranging from 0.2 to 2.0 micro L. Although the valve has a specification of helium leak-free rating of 82.7 bar (1200 psig), the valve passes a hydrostatic pressure test of up to 414 bar (6000 psig). In the unheated version of PLIS, vaporization of solutes occur mainly because of the sheering effect of carrier gas in combination with thermal energy drawn from an injection port or a heated adaptor. This was found to be adequate for solutes with high to medium volatility of up to nC14 hydrocarbon. A higher molecular weight range of up to nC44 hydrocarbon can be achieved with the implementation of a heated version of PLIS, in which the channel of the shaft can be resistively heated at a rate of up to 400 degrees C/s. With its first introduction in May 2002, PLIS has gained acceptance amongst practitioners in GC because it addresses a key unarticulated need in sample introduction/enrichment and by specifically targeting many deficiencies encountered in contemporary high-pressure injection devices. In this paper, the design and performance of the various valve systems of PLIS, as well as industrial chromatographic applications, is presented.     

49.

Determination of formation constants of hydroxo and carbonate complexes of Pr(3+) in 2 M NaCl at 303 K     

López-González H  Jiménez-Reyes M  Rojas-Hernández A  Solache-Ríos M 《Talanta》1997,44(10):1891-1899

The hydrolysis of praseodymium III in 2 M sodium chloride at 303 K was studied. Two methods were used: pH titration followed by a computational refinement and solvent extraction in the presence of a competitive ligand. The hydrolysis constants obtained by pH titration were: logbeta(1,H)=-7.68+/-0.07, logbeta(1,2H)=-15.10+/-0.03, and beta(1,3H)=-23.80+/-0.04. The stability constants of praseodymium carbonate complexes were determined by pH titration as well and were: logbeta(1,CO(2-)(3))=5.94+/-0.08 and logbeta(1,2CO(2-)(3))=11.15+/-0.15. Praseodymium carbonate species were taken into consideration for calculating the first hydrolysis constants by the solvent extraction method and the value obtained was: logbeta(1,H)=-7.69+/-0.27. The values for logbeta(1,H) attained by both methods are the same. The species-distribution diagram was obtained from the stability constants of praseodymium carbonate complexes and hydrolysis products in the conditions of the present work.     

50.

Brownian Dynamics, Molecular Dynamics, and Monte Carlo modeling of colloidal systems     

Chen JC  Kim AS 《Advances in colloid and interface science》2004,112(1-3):159-173

This paper serves as an introductory review of Brownian Dynamics (BD), Molecular Dynamics (MD), and Monte Carlo (MC) modeling techniques. These three simulation methods have proven to be exceptional investigative solutions for probing discrete molecular, ionic, and colloidal motions at their basic microscopic levels. The review offers a general study of the classical theories and algorithms that are foundational to Brownian Dynamics, Molecular Dynamics, and Monte Carlo simulations. Important topics of interest include fundamental theories that govern Brownian motion, the Langevin equation, the Verlet algorithm, and the Metropolis method. Brownian Dynamics demonstrates advantages over Molecular Dynamics as pertaining to the issue of time-scale separation. Monte Carlo methods exhibit strengths in terms of ease of implementation. Hybrid techniques that combine these methods and draw from these efficacies are also presented. With their rigorous microscopic approach, Brownian Dynamics, Molecular Dynamics, and Monte Carlo methods prove to be especially viable modeling methods for problems with challenging complexities such as high-level particle concentration and multiple particle interactions. These methods hold promising potential for effective modeling of transport in colloidal systems.     

[首页] « 上一页 [1] [2] [3] [4] 5 [6] [7] [8] [9] [10] [11] 下一页 » 末  页»

	$\text{ΔH}{}_{\mathrm{f}}{}^{\mathrm{o}}\text{(c, 298.15 K)/kJ mol}{}^{\mathrm{?1}}$	$\text{ΔH}{}_{\mathrm{s}}\text{/kJ mol}{}^{\mathrm{?1}}$
o-t-butylbenzoic acid	476.2 ± 1.9	99.8 ± 0.4	(at 314.6 K)
m-t-butylbenzoic acid	504.3 ± 1.6	103.0 ± 0.5	(at 326.5 K)
p-t-butylbenzoic acid	502.9 ± 1.7	103.8 ± 0.4	(at 334.1 K)

Thermal characterization of UHMWPE stabilized with natural antioxidants

This work presents a study of the thermal degradation of ultra-high molecular mass polyethylene (UHMWPE) stabilized with natural (α-tocopherol and carvacrol) and synthetic antioxidants. Thermogravimetric analysis in dynamic mode was used to determine the apparent activation energies of different samples. The stabilization of UHMWPE with low concentrations (around 0.3%) of α-tocopherol is enough to obtain an efficient thermal performance of the polymer. Carvacrol is also a good stabilizer for UHMWPE, but at higher concentration than in the case of α-tocopherol. The comparison of apparent activation energy between samples with natural and synthetic antioxidants in similar concentration shows that α-tocopherol is a better stabilizer in terms of their thermal performance.     

Reactions of tetracarbonylcobaltate(-I) with chlorosilanes in ether solvents

The reactions of NaCo(CO)₄ with Me_nSiCl_4?n (n = 0–3) in diethylether (Et₂O) and in tetrahydrofuran (THF) have been studied. Three distinct reaction pathways were recognised which depend on the acidity of the chlorosilane and basicity of solvent. Attack at the silicon centre via the Co atom of Co(CO)₄^? leads to formation of a SiCo bond; reaction involving a CO ligand of Co(CO)₄^? gives clusters R₃SiOCCo₃(CO)₉; and chlorosilane induced attack of Co(CO)₄^? on the solvent gives products derived from THF molecules.     

Effect of oxidative stabilization on the electrochemical performance of carbon mesophases as electrode materials for lithium batteries

The effect of oxidative stabilization as a mean to modify the carbon texture was essayed in a group of mesophases previous to carbonization at 900 °C with the aim of evaluating the influence on electrochemical performance when used as electrode materials in lithium test cells. X-ray diffraction, optical microscopy and chemical analysis, Fourier-transform infrared spectroscopy have been used to describe the compositional and textural properties of the as-produced parent mesophases, the samples were further treated under air current to stabilize their microstructures and the corresponding carbonized samples at 900 °C. The electrochemical performance was determined by the galvanostatic method and further correlated to the physical–chemical properties and interface resistance of the materials. In all cases, the stabilization process has demonstrated a beneficial effect on the capacity retention in the measured range.     

A convenient enantioselective synthesis of (S)-alpha-trifluoromethylisoserine

[reaction: see text] This report describes two straightforward synthetic methodologies to obtain alpha-CF3-isoserine, a new alpha,alpha-disubstituted beta-amino acid, from alpha-(trifluoromethyl)acrylic acid. The routes involve the synthesis of five-membered cyclic sulfates (using sulfuryl chloride) or sulfamidates (using the Burgess reagent) from the corresponding chiral diols, which are obtained by a catalytic asymmetric dihydroxylation (AD) reaction.     

Electrodeposition of cobalt on stainless steel foils. Preparation of57Co sources for Mössbauer experiments

Conditions for the electrodeposition of⁵⁹Co and⁵⁷Co on stainless steel foils have been studied. A set of electrolytic parameters has been determined to get a reasonably good electrodeposited sample. The⁵⁷Co electrodeposited foil was then introduced in a quartz tube to be annealed in an argon flow. The final product was a 11 Ci Mössbauer source for college experiments which was succesfully tested by obtaining spectra of stainless steel and sodium nitroprusside.     

Differential pulse polarographic determination of salicylaldehyde as its Girard-P derivative

A method for the determination of salicylaldehyde (2 × 10^–6–10^–4 M) by differential-pulse polarography, based on the in situ formation of its Girard-P derivative in aqueous solution at pH 2.5, is proposed. The relative standard deviation was 1.5% (ten determinations of 4 × 10^–5 M level). The applicability of this method was checked in synthetic samples containing salicyl alcohol,o-aminophenol, 2-methylphenol, salicylic acid and 4-aminobenzoic acid.     

Innovations in high-pressure liquid injection technique for gas chromatography: pressurized liquid injection system

In gas chromatography (GC), highly volatile liquefied hydrocarbons are commonly injected using devices such as high-pressure syringes, piston valves, liquid rotary sampling valves, or vaporizing regulators. Although these techniques are adequate in some cases, there are known deficiencies. A new generation of sampling valve has been recently innovated and commercialized. Some of the highlights of the pressurized liquid injection system (PLIS) include compact size, the capability to directly couple to an injection port without the need for preinjection vaporization and transfer lines, and sample sizes ranging from 0.2 to 2.0 micro L. Although the valve has a specification of helium leak-free rating of 82.7 bar (1200 psig), the valve passes a hydrostatic pressure test of up to 414 bar (6000 psig). In the unheated version of PLIS, vaporization of solutes occur mainly because of the sheering effect of carrier gas in combination with thermal energy drawn from an injection port or a heated adaptor. This was found to be adequate for solutes with high to medium volatility of up to nC14 hydrocarbon. A higher molecular weight range of up to nC44 hydrocarbon can be achieved with the implementation of a heated version of PLIS, in which the channel of the shaft can be resistively heated at a rate of up to 400 degrees C/s. With its first introduction in May 2002, PLIS has gained acceptance amongst practitioners in GC because it addresses a key unarticulated need in sample introduction/enrichment and by specifically targeting many deficiencies encountered in contemporary high-pressure injection devices. In this paper, the design and performance of the various valve systems of PLIS, as well as industrial chromatographic applications, is presented.     

Determination of formation constants of hydroxo and carbonate complexes of Pr(3+) in 2 M NaCl at 303 K

The hydrolysis of praseodymium III in 2 M sodium chloride at 303 K was studied. Two methods were used: pH titration followed by a computational refinement and solvent extraction in the presence of a competitive ligand. The hydrolysis constants obtained by pH titration were: logbeta(1,H)=-7.68+/-0.07, logbeta(1,2H)=-15.10+/-0.03, and beta(1,3H)=-23.80+/-0.04. The stability constants of praseodymium carbonate complexes were determined by pH titration as well and were: logbeta(1,CO(2-)(3))=5.94+/-0.08 and logbeta(1,2CO(2-)(3))=11.15+/-0.15. Praseodymium carbonate species were taken into consideration for calculating the first hydrolysis constants by the solvent extraction method and the value obtained was: logbeta(1,H)=-7.69+/-0.27. The values for logbeta(1,H) attained by both methods are the same. The species-distribution diagram was obtained from the stability constants of praseodymium carbonate complexes and hydrolysis products in the conditions of the present work.     

Brownian Dynamics, Molecular Dynamics, and Monte Carlo modeling of colloidal systems

This paper serves as an introductory review of Brownian Dynamics (BD), Molecular Dynamics (MD), and Monte Carlo (MC) modeling techniques. These three simulation methods have proven to be exceptional investigative solutions for probing discrete molecular, ionic, and colloidal motions at their basic microscopic levels. The review offers a general study of the classical theories and algorithms that are foundational to Brownian Dynamics, Molecular Dynamics, and Monte Carlo simulations. Important topics of interest include fundamental theories that govern Brownian motion, the Langevin equation, the Verlet algorithm, and the Metropolis method. Brownian Dynamics demonstrates advantages over Molecular Dynamics as pertaining to the issue of time-scale separation. Monte Carlo methods exhibit strengths in terms of ease of implementation. Hybrid techniques that combine these methods and draw from these efficacies are also presented. With their rigorous microscopic approach, Brownian Dynamics, Molecular Dynamics, and Monte Carlo methods prove to be especially viable modeling methods for problems with challenging complexities such as high-level particle concentration and multiple particle interactions. These methods hold promising potential for effective modeling of transport in colloidal systems.