Phosphate-selective electrodes containing immobilised ionophores

Phosphate selective electrodes have been produced based upon rubbery membranes containing heterocylic macrocycles as sensors covalently bound to a cross-linked polystyrene-block–polybutadiene-block–polystyrene (SBS) polymer. The membranes were robust and the best HPO₄²⁻-selective membrane fabricated was composed of 7.1% (m/m) dicumyl peroxide, 28.3% (m/m) 2-nitrophenyloctylether, 9.8% (m/m) 3-(10-undecenyl)-1,5,8-triazacyclodecane-2,4-dione, 31.0% (m/m) SBS and 23.8% (m/m) PoleStar™ 200R (clay-based filler). The characteristics of this electrode were a linear Nernstian range of 3.9×10⁻³ to 1×10⁻⁶ mol dm⁻³ HPO₄²⁻ with a limit of detection of 1.0×10⁻⁶ mol dm⁻³ HPO₄²⁻, a slope of −29.7±0.9 mV per activity decade and a pH range from 6 to 8. Selectivity coefficients for phosphate against various interfering anions (chloride, sulfate and nitrate) were determined. Response times were 2 min or under, stability of response and electrode lifetime in continuous use were also very satisfactory. The response behavior of HPO₄²⁻-ISEs based upon mobile and bound ionophores was comparable and suggests that mobility of the ionophore is not necessary to obtain a working ISE and that covalent binding of ionophores can be used to produce ISEs of increased stability and robustness.     

Enzymatic Synthesis of Fructosyl Glycerol

ABSTRACT

The enzymatic synthesis of ß2-2' and ß2-1'-D- fructopyranosyl glycerol was carried out with levansucrase from Bacillus circulans or B.subtilis, using sucrose as fructosyl donor and glycerol. The specificity and efficiency of the enzyme was modified by controlling both the water and the total substrate concentrations. The products were purified by HPLC and analyzed by ¹H, ¹³C NMR and GC-MS.     

Spectroscopic, structural, and conformational properties of (Z)-4,4,4-trifluoro-3-(2-hydroxyethylamino)-1-(2-hydroxyphenyl)-2-buten-1-one, C12H12F3NO3: a trifluoromethyl-substituted β-aminoenone

The (Z)-4,4,4-trifluoro-3-(2-hydroxyethylamino)-1-(2-hydroxyphenyl)-2-buten-1-one (C(12)H(12)F(3)NO(3)) compound was thoroughly studied by IR, Raman, UV-visible, and (13)C and (19)F NMR spectroscopies. The solid-state molecular structure was determined by X-ray diffraction methods. It crystallizes in the P2(1)/c space group with a = 12.1420(4) ?, b = 7.8210(3) ?, c = 13.8970(5) ?, β = 116.162(2)°, and Z = 4 molecules per unit cell. The molecule shows a nearly planar molecular skeleton, favored by intramolecular OH···O and NH···O bonds, which are arranged in the lattice as an OH···O bonded polymer coiled around crystallographic 2-fold screw-axes. The three postulated tautomers were evaluated using quantum chemical calculations. The lowest energy tautomer (I) calculated with density functional theory methods agrees with the observed crystal structure. The structural and conformational properties are discussed considering the effect of the intra- and intermolecular hydrogen bond interactions.     

Anisotropy on the collective dynamics of water confined in swelling clay minerals

Collective excitations of water confined in the interlayer space of swelling clay minerals were studied by means of inelastic neutron scattering. The effect of bidimensional confinement on the dynamics of the interlayer water was investigated by using a synthetic Na-saponite sample with a general formula of Si(7.3)Al(0.7)Mg(6)O(20)(OH)(4)Na(0.7) in a bilayer hydration state. Experimental results reveal two inelastic signals, different from those described for bulk water with a clear anisotropy on the low-energy excitation of the collective dynamics of interlayer water, this difference being stronger in the perpendicular direction. Results obtained for the parallel direction follow the same trend as bulk water, and the effect of the confinement is mainly manifested from the fact that clay interlayer water is more structured than bulk water. Data obtained in the perpendicular direction display a nondispersive behavior below a cutoff wavenumber value, Q(c), indicating a nonpropagative excitation below that value. Molecular dynamics simulations results agree qualitatively with the experimental results.     

Integration of gold nanoparticles in optical resonators

The optical absorption of one-dimensional photonic crystal based resonators containing different types of gold nanoparticles is controllably modified by means of the interplay between planar optical cavity modes and localized surface plasmons. Spin-casting of metal oxide nanoparticle suspensions was used to build multilayered photonic structures that host (silica-coated) gold nanorods and spheres. Strong reinforcement and depletion of the absorptance was observed at designed wavelength ranges, thus proving that our method provides a reliable means to modify the optical absorption originated at plasmonic resonances of particles of arbitrary shape and within a wide range of sizes. These observations are discussed on the basis of calculations of the spatial and spectral dependence of the optical field intensity within the multilayers.     

Laboratory studies of CHF2CF2CH2OH and CF3CF2CH2OH: UV and IR absorption cross sections and OH rate coefficients between 263 and 358 K

Fluorinated alcohols, such as 2,2,3,3-tetrafluoropropanol (TFPO, CHF(2)CF(2)CH(2)OH) and 2,2,3,3,3-pentafluoropropanol (PFPO, CF(3)CF(2)CH(2)OH), can be potential replacements of hydrofluorocarbons with large global warming potentials, GWPs. IR absorption cross sections for TFPO and PFPO were determined between 4000 and 500 cm(-1) at 298 K. Integrated absorption cross sections (S(int), base e) in the 4000-600 cm(-1) range are (1.92 ± 0.34) × 10(-16) cm(2) molecule(-1) cm(-1) and (2.05 ± 0.50) × 10(-16) cm(2) molecule(-1) cm(-1) for TFPO and PFPO, respectively. Uncertainties are at a 95% confidence level. Ultraviolet absorption spectra were also recorded between 195 and 360 nm at 298 K. In the actinic region (λ > 290 nm), an upper limit of 10(-23) cm(2) molecule(-1) for the absorption cross sections (σ(λ)) was reported. Photolysis in the troposphere is therefore expected to be a negligible loss for these fluoropropanols. In addition, absolute rate coefficients for the reaction of OH radicals with CHF(2)CF(2)CH(2)OH (k(1)) and CF(3)CF(2)CH(2)OH (k(2)) were determined as a function of temperature (T = 263-358 K) by the pulsed laser photolysis/laser induced fluorescence (PLP-LIF) technique. At room temperature, the average values obtained were k(1) = (1.85 ± 0.07) × 10(-13) cm(3) molecule(-1) s(-1) and k(2) = (1.19 ± 0.03) × 10(-13) cm(3) molecule(-1) s(-1). The observed temperature dependence of k(1)(T) and k(2)(T) is described by the following expressions: (1.35 ± 0.23) × 10(-12) exp{-(605 ± 54)/T} and (1.36 ± 0.19) × 10(-12) exp{-(730 ± 43)/T} cm(3) molecule(-1) s(-1), respectively. Since photolysis of TFPO and PFPO in the actinic region is negligible, the tropospheric lifetime (τ) of these species can be approximated by the lifetime due to the homogeneous reaction with OH radicals. Global values of τ(OH) were estimated to be of 3 and 4 months for TFPO and PFPO, respectively. GWPs relative to CO(2) at a time horizon of 500 years were calculated to be 8 and 12 for TFPO and PFPO, respectively. Despite the higher GWP relative to CO(2), these species are not expected to significantly contribute to the greenhouse effect in the next decades since they are short-lived species and will not accumulate in the troposphere even as their emissions grow up.     

Epoxide Opening versus Silica Condensation during Sol–Gel Hybrid Biomaterial Synthesis

Hybrid organic–inorganic solids represent an important class of engineering materials, usually prepared by sol–gel processes by cross‐reaction between organic and inorganic precursors. The choice of the two components and control of the reaction conditions (especially pH value) allow the synthesis of hybrid materials with novel properties and functionalities. 3‐Glycidoxypropyltrimethoxysilane (GPTMS) is one of the most commonly used organic silanes for hybrid‐material fabrication. Herein, the reactivity of GPTMS in water at different pH values (pH 2–11) was deeply investigated for the first time by solution‐state multinuclear NMR spectroscopic and mass spectrometric analysis. The extent of the different and competing reactions that take place as a function of the pH value was elucidated. The NMR spectroscopic and mass spectrometric data clearly indicate that the pH value determines the kinetics of epoxide hydrolysis versus silicon condensation. Under slighly acidic conditions, the epoxy‐ring hydrolysis is kinetically more favourable than the formation of the silica network. In contrast, under basic conditions, silicon condensation is the main reaction that takes place. Full characterisation of the formed intermediates was carried out by using NMR spectroscopic and mass spectrometric analysis. These results indicate that strict control of the pH values allows tuning of the reactivity of the organic and inorganic moities, thus laying the foundations for the design and synthesis of sol–gel hybrid biomaterials with tuneable properties.     

Syntheses and Study of New 2-Hydroxy-5,6-Dihydro-2H-1,4-Oxazines by NMR and X-ray Crystallography

The preparation of six new 2-hydroxy-5,6-dihydro-2H-[1,4]-oxazines and four oxazino-oxazine type structures is described. The structures of four of these compounds were established by X-ray crystallographic analyses.     

The Use of tert-Butyl Vinyl Ether in Stepwise Electrophilic Addition Reactions

tert-Butyl vinyl ether (1) reacts with p-TolSCl to give 2-tert-butoxy-2-chloroethyl p-tolyl sulfide (2). In the presence of SnCl₄, 2 reacts with silyl enol ethers, allyltrimethylsilane, and vinyl ethers to form a C-C bond. In the case of vinyl ethers, the reaction proceeds through the formation of the 5-membered sulfonium salt intermediate which in turn can react with H₂O, TMSCN, allyltrimethylsilane, and Grignard reagents.     

Temperature Dependent Spectroscopic Properties of Cu+ and Dy3+ Co-Doped Phosphate Glass: Band Gap Analysis and Cu Nanocluster-Enhanced Dy3+ Luminescence

This paper reports on the effects of temperature on light absorption and emission in Cu⁺ and Dy³⁺ co-doped phosphate glass, which is of interest for photonic applications. First, the temperature dependence of the absorption edge of the glass in connection with Cu⁺ ions absorption was assessed. A thermally-induced red shift attributed to Cu⁺ ion-lattice interactions was observed and analyzed through optical band gap determinations in the context of indirect-allowed transitions. Application of the Varshni model for the dependence of the energy gaps with temperature allowed to estimate the 0 K energy gap at 2.87 (±0.01) eV. Furthermore, Dy³⁺ photoluminescence (PL) along with Cu nanoparticles (NPs) absorption was monitored in real-time during an isothermal treatment by the in situ concurrent PL and absorption microspectroscopy technique. Periods of enhancement and quenching of Dy³⁺ emission linked to bidirectional energy transfer processes involving non-plasmonic Cu clusters and plasmonic Cu NPs were revealed. The formation of Cu NPs was promoted by tin(II) used as reductant. It is the first time to the author's knowledge that the 0 K energy gap is estimated for a highly Cu⁺-doped glass and that the enhancement of Dy³⁺ PL by Cu clusters is exposed.