ANTIVIRAL ACTIVITY OF MEROCYANINE 540

Abstract Simultaneous exposure to the lipophilic dye merocyanine 540 (MC 540) and white light inactivates several enveloped viruses. The same treatment appears to have little or no effect on pluripotent hematopoietic stem cells, mature red cells, and mature leukocytes. At least some components of the clotting system are spared, too. The molecular basis of the virucidal effect of MC 540 and light is not yet completely understood. Based on what is known about the interactions of MC 540 with cells and artificial membranes, it seems likely that MC 540 binds to and damages the viral envelope. MC 540-mediated photosensitization may have implications for the sterilization of bone marrow and blood products, the preparation of vaccines, and selected areas of antiviral therapy.     

Comparison of linear-scaling semiempirical methods and combined quantum mechanical/molecular mechanical methods for enzymic reactions. II. An energy decomposition analysis

QM/MM methods have been developed as a computationally feasible solution to QM simulation of chemical processes, such as enzyme-catalyzed reactions, within a more approximate MM representation of the condensed-phase environment. However, there has been no independent method for checking the quality of this representation, especially for highly nonisotropic protein environments such as those surrounding enzyme active sites. Hence, the validity of QM/MM methods is largely untested. Here we use the possibility of performing all-QM calculations at the semiempirical PM3 level with a linear-scaling method (MOZYME) to assess the performance of a QM/MM method (PM3/AMBER94 force field). Using two model pathways for the hydride-ion transfer reaction of the enzyme dihydrofolate reductase studied previously (Titmuss et al., Chem Phys Lett 2000, 320, 169-176), we have analyzed the reaction energy contributions (QM, QM/MM, and MM) from the QM/MM results and compared them with analogous-region components calculated via an energy partitioning scheme implemented into MOZYME. This analysis further divided the MOZYME components into Coulomb, resonance and exchange energy terms. For the model in which the MM coordinates are kept fixed during the reaction, we find that the MOZYME and QM/MM total energy profiles agree very well, but that there are significant differences in the energy components. Most significantly there is a large change (approximately 16 kcal/mol) in the MOZYME MM component due to polarization of the MM region surrounding the active site, and which arises mostly from MM atoms close to (<10 A) the active-site QM region, which is not modelled explicitly by our QM/MM method. However, for the model where the MM coordinates are allowed to vary during the reaction, we find large differences in the MOZYME and QM/MM total energy profiles, with a discrepancy of 52 kcal/mol between the relative reaction (product-reactant) energies. This is largely due to a difference in the MM energies of 58 kcal/mol, of which we can attribute approximately 40 kcal/mol to geometry effects in the MM region and the remainder, as before, to MM region polarization. Contrary to the fixed-geometry model, there is no correlation of the MM energy changes with distance from the QM region, nor are they contributed by only a few residues. Overall, the results suggest that merely extending the size of the QM region in the QM/MM calculation is not a universal solution to the MOZYME- and QM/MM-method differences. They also suggest that attaching physical significance to MOZYME Coulomb, resonance and exchange components is problematic. Although we conclude that it would be possible to reparameterize the QM/MM force field to reproduce MOZYME energies, a better way to account for both the effects of the protein environment and known deficiencies in semiempirical methods would be to parameterize the force field based on data from DFT or ab initio QM linear-scaling calculations. Such a force field could be used efficiently in MD simulations to calculate free energies.     

Hyperoxygenation enhances the tumor cell killing of photofrin-mediated photodynamic therapy

Tumor hypoxia, either preexisting or as a result of oxygen depletion during photodynamic therapy (PDT) light irradiation, can significantly reduce the effectiveness of PDT-induced cell killing. To overcome tumor hypoxia and improve tumor cell killing, we propose using supplemental hyperoxygenation during Photofrin-PDT. The mechanism for the tumor cure enhancement of the hyperoxygenation-PDT combination is investigated using an in vivo-in vitro technique. A hypoxic tumor model was established by implanting mammary adenocarcinoma in the hind legs of mice. Light irradiation (200 J/cm2 at either 75 or 150 mW/cm2), under various oxygen supplemental conditions (room air, carbogen, 100% normobaric or hyperbaric oxygen), was delivered to animals that received 12.5 mg/kg Photofrin 24 h before light irradiation. Tumors were harvested at various time points after PDT and grown in vitro for colony formation analysis. Treated tumors were also analyzed histologically. The results show that when PDT is combined with hyperoxygenation, the hypoxic condition could be improved and the cell killing rate at various time points after PDT could be significantly enhanced over that without hyperoxygenation, suggesting an enhanced direct and indirect cell killing associated with high-concentration oxygen breathing. This study further confirms our earlier observation that when a PDT treatment is combined with hyperoxygenation it can be more effective in controlling hypoxic tumors.     

Theoretical study of “protonated pyruvate”: A methylhydroxycarbene—carbon dioxide complex—implications for the decarboxylation of pyruvic acid

Two conformers of protonated pyruvate, CH₃C⁺(OH)COO, with the OH group either trans or cis to the methyl group and the carboxylate group in the C? C? C plane have been studied using the ab initio SCF/3-21G method, as well as by some semiempirical AM1 calculations. Both ab initio SCF and AM1 curves for the potential energy as a function of the C? COO distance exhibit a minimum corresponding to a complex of methylhydroxycarbene, CH₃COH, associated with carbon dioxide, but only the AM1 curves predict an inner minimum corresponding to a covalently bonded protonated pyruvate molecule with a C? COO distance of 1.6–1.7 Å. The two models also disagree on the dissociation pathway for pyruvic acid, with the AM1 calculations predicting formation of acetyl and HOCO radicals while the ab initio method predicts dissociation into methylhydroxycarbene and carbon dioxide following an initial intramolecular proton transfer. The weakly bound complexes of methylhydroxycarbene and carbon dioxide have been studied in some detail using ab initio SCF and MP2 methods in conjunction with 6-311G** basis sets, obtaining equilibrium geometries and vibrational frequencies. In addition, the lactone-type isomer of protonated pyruvate, which contains a C? C? O ring, was also studied. The conclusions of these calculations are consistent with those from earlier work using the smaller 3-21G basis set. The most stable complex is predicted to occur between trans-methylhydroxycarbene and carbon dioxide where substantial stabilization is provided by an OH ? OC hydrogen bond. © 1993 John Wiley & Sons, Inc.     

Buffers for the Physiological pH Range: Thermodynamics of the Second Dissociation of N-(2-Hydroxyethyl)piperazine-N′-2-hydroxypropanesulfonic Acid From 5 to 55°C

The second acidic dissociation constants pK ₂ of the ampholyte N-(2-hydroxyethyl) piperazine-N-2-hydroxypropanesulfonic acid (HEPPSO) have been determined at seven temperatures from 5 to 55°C from emf measurements utilizing hydrogen and silver–silver chloride cells without liquid junction. The thermodynamic quantities, G°, H°,S°, and C _p ^o have been calculated from the temperature coefficient of pK ₂. At 25°C, the pK ₂ = 8.042 and at 37°C, pK ₂ = 7.876; hence, buffer solutions of HEPPSO and NaHEPPSOate are important for pH control in the region close to that of clinical fluids (blood serum). Conventional pH values from 5 to 55°C as well as those obtained from liquid junction correction at 25 and 37°C have been reported for three buffer solutions with the compositions (molality scale): (1) equimolal mixture of HEPPSO (0.04 m) + NaHEPPSOate (0.04 m) + NaCl (0.12 m); (2) HEPPSO (0.08 m) + NaHEPPSOate (0.08 m); and (3) HEPPSO (0.08 m) + NaHEPPSOate (0.08 m) + NaCl (0.08 m).     

Copper(II) and nickel(II) complexes of 2-formylpyridine 3-piperidinyl-, 3-hexamethyleneiminyl- and 3-azabicyclo[3.2.2]nonylthiosemicarbazones

Summary Copper(II) and nickel(II) complexes of 2-formylpyridine 3-piperidinyl-, 3-hexamethyleneiminyl- and 3-azabicyclo-[3.2.2]nonylthiosemicarbazones were prepared and characterized spectroscopically. ¹H and ¹³C n.m.r. spectra of the thiosemicarbazones and a diamagnetic nickel(II) complex are reported, together with i.r., electronic and e.s.r. spectra of the metal complexes. The thiosemicarbazones and their copper(II) and nickel(II) complexes exhibit considerable growth inhibitory activity against Paecilomyces variotii, but show minimal activity against Aspergillus niger.     

The value of the π-bond order–bond length relationship in geometry prediction and chemical bonding interpretation

The π-bond order–bond length relationship is reintroduced to the literature and extended to heteronuclear bonds by presenting graphs derived solely by theoretical methods. π-bond order and overlap population results for carbon–carbon, carbon–nitrogen, and carbon–oxygen bonds obtained from ab initio STO -3G calculations using theoretically-optimized geometries are reported for a series of pteridines and for a wide range of small organic molecules. The order–length correlation graphs are used in predicting the “intrinsic” single bond lengths for sp² – sp² and sp – sp hybridized C? C, C? N, and C? O bonds, and in evaluating the relative importance of hybridization, π-electron delocalization and bond polarization effects in causing bond shortening in conjugated and hyperconjugated molecules. The calculated value of the π-bond order for a given bond in a molecule is shown to be relatively insensitive to moderate geometry changes: Hence, a use for the correlation graphs in geometry prediction is suggested. Some results for the extended 4-21G basis set are also presented.     

Terpenoic acid glycerides from the dorid nudibranch Archidoris montereyensis

Extracts of the dorid nudibranch $\text{Archidoris montereyensis}$ contain a diterpenoic acid glyceride 1 whose structure has been determined by x-ray diffraction analysis. The structure of a minor metabolite, the sesquiterpenoic acid glyceride 2, was determined by chemical correlation.     

MS/MS Fragmentation Behavior Study of meso-Phenylporphyrinoids Containing Nonpyrrolic Heterocycles and meso-Thienyl-Substituted Porphyrins

Free base and cobalt(II) complexes of six meso-tetraphenylporphyrinoids containing nonpyrrolic heterocycles and of three meso-thienylporphyrins were investigated using electrospray ionization tandem mass spectrometry (ESI-MS/MS). Their fragmentation was studied in a quadrupole ion trap as a function of the porphyrinoid macrocycle structure and compared with the fragmentation behavior of the benchmark compound meso-tetraphenylporphyrin. In situ oxidation of the neutral cobalt(II) complexes under ESI conditions produced singly charged cobalt(III) porphyrinoid ions; the free bases were ionized by protonation. For the porphyrinoids with an intact porphyrin core, the major fragmentation pathways observed were the losses of the meso-substituent (for meso-phenyl groups) and characteristic fragmentations of one or more meso-substituents (for the meso-thienyl group). Complex fragmentation pathways were observed for porphyrinoids with modifications to the porphyrin core but chemically reasonable structures could be assigned to most fragments, thus delineating general patterns for the behavior of pyrrole-modified porphyrins under CID conditions.

Preparation and characterization of electrospun nanofiber-coated membrane separators for lithium-ion batteries

Nanofiber-coated membrane separators were prepared by electrospinning polyvinylidene fluoride-co-chlorotrifluoroethylene (PVDF-co-CTFE) nanofibers onto three different microporous membrane substrates. The nanofibers on the membrane substrates showed uniform morphology with average fiber diameters ranging from 129 to 134 nm. Electrolyte uptakes, ionic conductivities, and interfacial resistances were studied by soaking the nanofiber-coated membrane separators with a liquid electrolyte solution of 1 M lithium hexafluorophosphate in ethylene carbonate/dimethylcarbonate/ethylmethyl carbonate (1:1:1 by volume). Compared with uncoated membranes, nanofiber-coated membranes had greater electrolyte uptakes and lower interfacial resistances to the lithium electrode. It was also found that after soaking in the liquid electrolyte solution, nanofiber-coated membranes exhibited higher ionic conductivities than uncoated membranes. In addition, lithium-ion half cells containing nanofiber-coated membranes were evaluated with a LiFePO₄ cathode for charge–discharge capacities and cycle performance. The cells containing a nanofiber-coated separator membrane showed high discharge specific capacities and good cycling stability at room temperature. Results demonstrated that coating PVDF-co-CTFE nanofibers onto microporous membrane substrates is a promising approach to obtain new and high-performance separators for rechargeable lithium-ion batteries.