Synthesis and characterization of complexes of UO2(II) and Th(IV) of bis-schiff bases derived from furoylpyrazolone

Four new complexes of UO₂(II) and Th(IV) with bis-Schiff bases, derived from N,N'-bis[(l-phenyl-3-methyl-5-oxo-4-pyrazolinyl)-a-furylmethylidyne]-1,2-propylenediimine [1,2-BPMOPFP-H₂] and N,N'- bis[(l-phenyl-3-methyl-5-oxo-4-pyrazolinyl)-a-furylmethylidyne]-1,3-propylenediimine [1,3-BPMOPFP-H₂], were synthesized and characterized by elemental analysis, IR, UV, ¹HNMR spectroscopy, and molar conductivity. The general formula of the complexes was confirmed to be [UO₂(BPMOPFP)], [Th(BPMOPFP)(NO₃)]NO₃. A possible structure for the complexes have been proposed.     

Determination of medecamycin by adsorptive stripping voltammetry with an activated electrode

The adsorptive and electrochemical behaviors of medecamycin were investigated on a glassy carbon electrode (GCE) pretreated by anodic oxidation at +1.8 V for 5 min in 0.025 mol l^–1 NH₃-NH₄Cl (pH 8.6) solution. An adsorptive stripping voltammetric method for the determination of medecamycin at the pretreated glassy carbon electrode has been developed. Medecamycin was accumulated in NH₃-NH₄Cl buffer (pH 9.0) at a potential of –0.7 V (vs. saturated calomel electrode (SCE)) for a certain time, and then determined by second-order differential anodic stripping voltammetry. The second-order differential anodic stripping peak current at +0.72 V was proportional to the concentration of medecamycin in the range 2.0 g ml^–1 to 50.0 g ml^–1. The detection limit (three times the signal-to-noise) was 1.0 g ml^–1 and the relative standard deviation of the results was 3.28% for eight successive determinations of 10.0 g ml^–1 medecamycin. This method has been applied to the direct determination of medecamycin in commercial tablets and spiked urine samples with satisfactory results.     

钇对Ti-1100高温钛合金热稳定性和蠕变行为的影响

量了Ｔｉ１１００和Ｔｉ１１００／０１％Ｙ（质量分数）高温钛合金在６００℃／１００ｈ空气中暴露后的拉伸性能及在６００℃／１５０ＭＰａ／１００ｈ条件下的蠕变性能，利用透射电镜观察了合金室温及蠕变后的组织。结果表明，Ｔｉ１１００合金加入０１％的Ｙ后，由于原始β晶粒得到细化，明显改善了其热稳定性；固溶在基体中的硅原子阻碍位错滑移和攀移，使蠕变中的回复过程难于实现；稀土还抑制α２相的长大，所形成的氧化物也阻碍位错的运动。这些均有利于提高Ｔｉ１１００合金的抗蠕变性能。     

The formation of mesoporous TiO2 spheres via a facile chemical process

The mesoporous TiO(2) solid and hollow spheres have been synthesized via a controllable and simple chemical route. Structural characterization indicates that these TiO(2) mesoporous spheres after calcined at 500 degrees C have an obvious mesoporous structure with the diameters of 200-300 nm for solid spheres and 200-500 nm for hollow spheres. The average pore sizes and BET surface areas of the mesoporous TiO(2) solid and hollow spheres are 6.8, 7.0 nm and 162, 90 m(2)/g, respectively. Optical adsorption investigation shows that TiO(2) solid and hollow spheres possess a direct band gap structure with the optical band gap of 3.68 and 3.75 eV, respectively. A possible formation mechanism for TiO(2) solid and hollow spheres is discussed.     

A direct quantitative analysis method for monitoring biogenic volatile organic compounds released from leaves of Pelargonium hortorum in situ

A direct quantitative method is presented that is based upon the use of multiple headspace solid phase microextraction (HS-SPME) to monitor biogenic volatile organic compounds (BVOCs) released from a living leaf of Pelargonium hortorum in situ. Seventeen BVOCs were detected by GC-MS after a single SPME extraction using a CAR/DVB/PDMS fibre. An internal standard was employed to determine the absolute amounts of seven terpenoid compounds released from a P. hortorum leaf. The quantitative analysis was performed over two days, with extraction preformed for 20 min every 3 h. The amount of volatiles extracted varied with the time of day, with two maxima recorded at 14:00 (day 1) and 17:00 (day 2), corresponding to 236 and 277 ng of the seven terpenoids recorded, respectively. These results indicate that multiple HS-SPME in combination with an internal standard is a simple, quick, and quantitative technique for analysising BVOC emissions from a live plant sample.     

Zn—TppS4极谱络合物吸附波的研究：中草药天麻,川芎,当归中锌的测定

锌是人体必需的微量元素之一。它具有重要的生理功能和营养作用,是合成脱氧核糖核酸(DNA),核糖核酸(RNA)和蛋白质必需的金属离子。锌是DNA,RNA聚合酶等80多种酶的组成成分及激剂,直接影响细胞代谢,免疫过程,细胞分裂和再生。最近美国有人提出缺     

A new method for inversion of hydroxyl group of carbocyclic nucleosides

The hydroxyl group of carbocyclic nucleosides was inversed when the compounds were treated with Me_3SiCl,KCN and a catalytic amount of NaI in DMF/CH_3CN.     

氧化藏红T褪色催化荧光法测定痕量钒

研究了在酸性介质中柠檬酸存在下，痕量钒（Ｖ）催化溴酸钾氧化藏红Ｔ的褪色反应及其动力学条件，建立了催化荧光测定痕量钒的新方法。催化反应在沸水浴中进行８ｍｉｎ，为假零级反应，反应的表观活化能力为９９．２１ｋＪ／ｍｏｌ，反应速度常数为０．１２／ｓ；该方法的检出限为２．２×１０＾－８ｇ／Ｌ；线性范围为０．２￣２．４μｇ／Ｌ研究了共存离子的影响，用于人发和煤灰中痕量钒的测定，结果令人满意。     

Sequential Injection Photometric Determination of Molybdenum Using Organic Wetting Film Extraction

Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the 31 metal species and 11 anions tested. In the first step, molybdenum(VI) was extracted into a toluene film as an ion paired complex. Molybdenum(VI) reacted with thiocyanate to form anionic molybdenum(V) and/or molybdenum(VI) thiocyanate complexes. The complexes were extracted into a toluene film containing tetraheptylammonium bromide as ion pairing reagent. The thiocyanate ligands were displaced by 1,5-diphenylcarbazone (DPC) to form a more intensely colored complex (λ_max= 540 nm). DPC was introduced in the back extraction solvent, methanol. The relative standard deviation was 2.5% for 50 ng ml⁻¹of molybdenum(VI) (n= 10) at a rate of 25 samples h⁻¹. The detection limit (3 × baseline noise) was 2.5 × 10⁻⁸M.