固体核磁共振Multiple-CP定量技术的参数优化与应用研究

固体核磁共振Multiple-CP定量技术可实现对不同体系、 不同定量信息的检测. 然而, Multiple-CP对样品属性的宽容度较低, 其中有关样品属性的核磁共振参数包括氢的自旋晶格弛豫时间(T_1,H)、 交叉弛豫时 间(T_CH)和自旋锁定场下氢的自旋晶格弛豫时间(T_{\mathrm{1}\rho }^{\text{?}\mathrm{H}})等. 因而需要系统地掌握Multiple-CP各种实验参数与样品上述特性参数之间的关系, 从而确定Multiple-CP技术可适用的体系范围以及最优的实验参数范围. 基于此, 首先以L-丙氨酸为模型样品, 探讨在Multiple-CP实验中弛豫恢复时间(t_d)、 交叉极化接触时间(t_p)和交叉极化次数(n) 3种实验参数对分子中基团比例测量结果的影响规律. 并以L-缬氨酸、 L-丙氨酸/L-缬氨酸的混合物为模型样品, 探讨样品特性参数的差异性对Multiple-CP实验参数范围的影响. 实验结果表明, t_p受T_CH和\text{?}{T}_{\mathrm{1}\rho }^{\text{?}\mathrm{H}}的影响较大. 对于纯净物或均相体系, T_CH是影响t_p参数设置的关键. 依据实验数据发现, 当样品中各基团T_CH差异度小于8%时, 实验对t_p的宽容度较高; 对于混合物体系, 需同时考虑混合物中组分\text{?}{T}_{\mathrm{1}\rho }^{\text{?}\mathrm{H}\text{?}}差异度的影响. 当组分\text{?}{T}_{\mathrm{1}\rho }^{\text{?}\mathrm{H}\text{?}}差异度为32%、 各基团T_CH差异度为21%时, Multiple-CP对t_p的宽容度高, 可在较宽的参数范围内实现定量检测. 而当T_CH差异度较大时, 获取定量结果时t_p的参数范围较小, 实验条件较苛刻. Multiple-CP定量方法更适用于T_CH和\text{?}{T}_{\mathrm{1}\rho }^{\text{?}\mathrm{H}\text{?}}差异度较小的样品体系的定量研究. 通过研究样品T_CH和\text{?}{T}_{\mathrm{1}\rho }^{\text{?}\mathrm{H}\text{?}}对实验参数的影响, 总结了Multiple-CP方法所适用的样品体系特征, 为使用Multiple-CP进行定量检测提供可参考的参数设置方案.     

Preparation of Low-dielectric Permittivity Polyimide Resins with High Surface Activity from Chemically Bonded Hyperbranched Polysiloxane

Thermosetting resin matrix is the key component of advanced wave-transparent composites,where low dielectric constant,excellent processability,high thermal stability,as well as good bonding ability are required for resins.Herein,we prepared a series of phenylethynyl terminated polyimide(PI)resins by grafting amine-functionalized hyperbranched polysiloxane(HBPSi)to PI chains during the in situ polymerization.The effects of HBPSi on the processability of oligomers,molecular packing,thermal stability,dielectric property and bonding ability to reinforce Kevlar fibers of the cured PI/HBPSi composite resins have been examined in detail.The dielectric constants of the cured composite resins were greatly reduced from 3.29 to 2.19 without compromising its processability and thermal stability.Meanwhile,the 10 wt％HBPSi-containing PI resin demonstrated better bonding ability to reinforce fibers with the interfacial shear strength(IFSS)of 37.64 MPa,compared with that of neat PI-6 matrix(27.34 MPa),and better adhesion to metal with the lap shear strength of 10.48 MPa,50％higher than that of neat resin PI-6(6.98 MPa).These resultant PI/HBPSi composite resins exhibit excellent comprehensive properties,indicating their great potential as low-dielectric constant resin matrix in radar radome.     

Pyrazole-based trinuclear and mononuclear complexes: synthesis,characterization, DNA interactions and cytotoxicity studies

Transition Metal Chemistry - A new trinuclear Cu(II) complex [Cu3(μ3-OH)(μ-pz)3(Hpz)2(HCOO)(BTAO)Cl] (1) (Hpz = pyrazole, BTAO = 4,6-bis(dimethylamino)-1,3,5-triazin-2(1H)-one) and four...     

Synergic Enhancement of High-density Polyethylene through Ultrahigh Molecular Weight Polyethylene and Multi-flow Vibration Injection Molding: A Facile Fabrication with Potential Industrial Prospects

General-purpose plastics with high strength and toughness have been in great demand for structural engineering applications. To achieve the reinforcement and broaden the application scope of high-density polyethylene(HDPE), multi-flow vibration injection molding(MFVIM) and ultrahigh molecular weight polyethylene(UHMWPE) are synergistically employed in this work. Herein, the MFVIM has better shear layer control ability and higher fabrication advantage for complex parts than other analogous novel injection molding technologies reported.The reinforcing effect of various filling times and UHMWPE contents as well as the corresponding microstructure evolution are investigated.When 5 wt% UHMWPE is added, MFVIM process with six flow times thickens the shear layer to the whole thickness. The tensile strength and modulus increase to 2.14 and 1.39 times, respectively, compared to neat HDPE on the premise of remaining 70% impact strength. Structural characterizations indicate that the enhancement is attributed to the improvement of shish-kebab content and lamellae compactness, as well as related to the corresponding size distributions of undissolved UHMWPE particles. This novel injection molding technology with great industrial prospects provides a facile and effective strategy to broaden the engineering applications of HDPE materials. Besides, excessive UHMWPE may impair the synergistic enhancement effect, which is also reasonably explained.     

多种超分辨荧光成像技术比较和进展评述

所见即所得是生命科学研究的中心哲学,贯穿在不断认识单个分子、分子复合体、分子动态行为和整个分子网络的历程中。活的动态的分子才是有功能的,这决定了荧光显微成像在生命科学研究中成为不可替代的工具。但是当荧光成像聚焦到分子水平的时候,所见并不能给出想要得到的。这个障碍是由于受光学衍射极限的限制,荧光显微镜无法在衍射受限的空间内分辨出目标物。超分辨荧光成像技术突破衍射极限的限制,在纳米尺度至单分子水平可视化生物分子,以前所未有的时空分辨率研究活细胞结构和动态过程,已成为生命科学研究的有力工具,并逐渐应用到材料科学、催化反应过程和光刻等领域。超分辨成像技术原理不同,其具有的技术性能各异,限制了各自特定的技术特色和应用范围。目前主流的超分辨成像技术包括3种:结构光照明显微镜技术(structured illumination microscopy, SIM)、受激发射损耗显微技术(stimulated emission depletion, STED)和单分子定位成像技术(single molecule localization microscopy, SMLM)。这些显微镜采用不同的复杂技术,但是策略却是相同和简单的,即通过牺牲时间分辨率来提升衍射受限的空间内相邻两个发光点的空间分辨。该文通过对这3种技术的原理比较和在生物研究中的应用进展介绍,明确了不同超分辨成像技术的技术优势和适用的应用方向,以方便研究者在未来研究中做合理的选择。     

KIT-6负载CeO2催化CO2和甲醇合成碳酸二甲酯

采用不同老化温度(80、100、120和150℃)合成了一系列KIT-6载体,并通过浸渍法制备了相应的CeO_2/KIT-6催化剂。结合X射线衍射、N_2物理吸附、NH_3程序升温脱附、CO_2程序升温脱附、透射电子显微镜、傅里叶变换红外光谱和X射线光电子能谱等表征结果,详细考察了老化温度对KIT-6结构以及CeO_2/KIT-6催化剂直接催化CO_2和甲醇合成碳酸二甲酯(DMC)反应活性的影响。结果表明,不同老化温度下制备的KIT-6均保持其独特的三维孔道结构。随着老化温度升高,KIT-6比表面积先增大后减小,当老化温度为100℃时,KIT-6比表面积达到最大(683 m~2·g~(-1))。KIT-6较高的比表面积有利于提高CeO_2分散度,进而提高暴露的活性位点数量,催化活性随催化剂表面中等碱/酸性吸附位数量和Ce~(3+)含量的增加而逐渐提高。其中,CeO_2/100-KIT-6催化剂中CeO_2颗粒尺寸最小(5.9 nm),暴露的活性位数量最高,催化活性最佳。随后,考察了反应温度和压力对CeO_2/100-KIT-6催化活性的影响。随着反应温度提高,催化活性先升高后降低,当反应温度为140℃时,催化活性最高;且催化活性随反应压力的提高而逐渐增加。在反应温度为140℃、压力为6.8 MPa条件下,催化剂经6次循环后,DMC收率由15 mmol·g_(CeO_2)~(-1)逐渐降低至2.8 mmol·g_(CeO_2)~(-1),原因归结为反应过程中CeO_2纳米颗粒发生团聚,使暴露出的活性位数量减少。     

多吡啶类双核镍配合物的合成、晶体结构及抗癌活性

合成了2个相似的多吡啶类双核镍配合物[Ni_2(L)_2Cl_2](ClO_4)_2·3H_2O (1)和[Ni_2(L)_2Cl_2](PF_6)_2 (2)(L=N,N-bis(pyridin-2-ylmethyl)-4-(4-((pyridin-2-ylmethyl)amino)benzyl)aniline),通过X射线单晶衍射对其结构进行测定并解析,并利用元素分析、红外光谱对其进行表征。另外,通过噻唑蓝(MTT)比色法检验了 2个配合物对HeLa细胞、BGC-823细胞、NCI-H460细胞以及HepG-2细胞的体外毒性作用,结果表明2个配合物均对NCI-H460细胞表现出良好的毒性作用,IC_(50)值分别为(26.0±2.2)μmol·L~(-1)(1)和(31.3±2.7) μmol·L-~1 (2)。进一步通过Hoechst 33342染色、活性氧水平检测、线粒体膜电位的测定和分析探究了配合物1的抗肿瘤作用机制,结果表明,该配合物可能通过线粒体途径来诱导细胞凋亡从而对癌细胞产生致死作用。     

Long-term super-resolution imaging of mitochondrial dynamics

Monitoring dynamics of mitochondria has become an essential approach to explore the function of mitochondria in living cells with the emergence of super-resolution fluorescence microscopy. However, long-term super-resolution imaging of mitochondria is still challenging due to the lack of photostable fluorescent probes and stable mitochondria-specific markers which are not affected by the changes of mitochondrial membrane potential. Here, we introduce a method for long-term imaging mitochondrial dynamic through the SNAP-tag fluorogenic probe based on 4-azetidinyl-naphthalimide derivatives. Using structured illumination microscopy (SIM), we observed the fusion and fission of mitochondria over a course of 16 min at 109 nm resolution. Furthermore, the interactions as well as fusion between mitochondria and lysosomes were studied during mitophagy at the nanoscale. Convincingly, the combination of SNAP-tag fluorogenic probes and super-resolution fluorescence microscopy will offer a new way to monitor dynamic mitochondria in living cells.     

Zwitterionic comb-like lipid polymers encapsulating linalool for increasing the fragrance retention time

Fragrances are widely used in cosmetics,apparel and detergents.However,the rapid evaporation of the aro ma shortens the useful life of the aromatic product.Therefore,improving the fragrance retention time of aromatic products and prolonging the service life of aromatic products are the key scientific problems that need to be solved in current aromatic products.In this study,zwitterionic comb-like lipid polymers were synthesized to encapsulate the fragrance molecule linalool.The results showed that the zwitterionic comb lipid molecules were capable of encapsulating more linalool than linear lipid molecules.At the same time,the zwitterionic comb-like lipid molecules also limited the slow release rate of the aroma,thereby increasing the fragrance retention time of the nano-fragrance.     

LHRH/TAT dual peptides-conjugated polymeric vesicles for PTT enhanced chemotherapy to overcome hepatocellular carcinoma

Combination therapy such as photothermal therapy (PTT) enhanced chemotherapy is regarded as a promising strategy for cancer treatment. Herein, we developed redox-responsive polymeric vesicles based on the amphiphilic triblock copolymer PCL-ss-PEG-ss-PCL. To avoid the limited therapeutic effect of chemotherapeutic drugs caused by systemic exposures and drug resistance, the redox-sensitive polymeric vesicles were cargoed with two chemotherapeutics: doxorubicin (DOX) and paclitaxel (PTX). Besides, indocyanine green (ICG) was encapsulated, and cell-penetrating peptides and LHRH targeting molecule were modified on the surface of polymeric vesicles. The results indicated that the polymeric vesicles can load different kinds of drugs with high drug loading content, trigger drug release in responsive to the reductive environment, realize high cellular uptake via dual peptides and laser irradiation, and achieve higher cytotoxicity via chemo-photothermal combination therapy. Hence, the redox-responsive LHRH/TAT dual peptides-conjugated PTX/DOX/ICG co-loaded polymeric micelles exhibited great potential in tumor-targeting and chemo-photothermal therapy.