Microstructure–conductivity relationship in Gd- and Sm-doped ceria-based electrolytes prepared by the acrylamide sol–gel-related method

We have prepared pure electrolytes of Ce_0.8Gd_0.2O_1.9 (CGO) and Ce_0.8Sm_0.2O_1.9 (CSO), useful for SOFCs, by a sol–gel-related technique like the acrylamide method. This method consists of preparing a solution from the single oxides followed by gelation. Then, the combustion or decomposition of the organic molecules is initiated, producing nanometric calcined powders of the above-mentioned compounds. Thermal treatments were optimized in order to obtain good electrochemical properties of the electrolytes. We have observed that the synthesis temperature to obtain the pure phase is lower for the sol–gel samples than for the pellets prepared by solid-state reaction, and the final density is higher. The microstructure and composition of the powders were characterized by TEM, SEM, and EDX analysis. The electrical properties of the electrolytes were measured by impedance spectroscopy at different temperatures and oxygen partial pressures.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

Monosized cationic nanoparticles prepared by emulsifer-free emulsion polymerization

Monosized poly(styrene/N-[3-(dimethylamino)propyl]methacrylamide/poly(ethylene glycol) ethyl ether methacrylate) [poly(St/PEG-EEM/DMAPM)] cationic nanoparticles were synthesized by emulsifier-free emulsion polymerization conducted in the presence of a cationic initiator, 2,2-azobis(2-methylpropionamidine) dihydrochloride (APDH or V-50). Particle sizes and surface charge densities were measured with a Zeta Sizer. The structure of the terpolymers was determined by Fourier transform IR and ¹H NMR spectroscopies. The amounts of the main monomer (St), cationic comonomer (DMAPM), stabilizer (PEG-EEM), and initiator (APDH), and the water-to-monomer phase ratio were all effective on both the average size and the surface charge of the nanoparicles. The average particle size was in the range 75–400 nm depending on the recipe applied; it decreased on increasing the amount of DMAP or PEG-EEM or the water-to-monomer phase ratio in the feed, while it increased with increasing St or APDH content. These nanoparticles were quite monodisperse with a polydispersity index of 1.008–1.14.     

Polyaniline nanofibers: facile synthesis and chemical sensors

Polyaniline nanofibers with uniform diameters between 30 and 50 nm can be made in bulk quantities through a facile aqueous/organic interfacial polymerization method at ambient conditions. The nanofibers have lengths varying from 500 nm to several micrometers and form interconnected networks. Thin films made of the nanofibers have superior performance in both sensitivity and time response to vapors of acid (HCl) and base (NH3).     

Hermite Interpolation and Sobolev Orthogonality

In this paper, we study orthogonal polynomials with respect to the bilinear form (f, g) _S = V(f) A V(g) ^T + <u, f ^(N) g ^(N)V(f) =(f(c ₀), f "(c ₀), ..., f ^{(n – 1)} ₀(c ₀), ..., f(c _p ), f "(c _p ), ..., f ^{(n – 1)} _p(c _p )) u is a regular linear functional on the linear space P of real polynomials, c ₀, c ₁, ..., c _p are distinct real numbers, n ₀, n ₁, ..., n _p are positive integer numbers, N=n ₀+n ₁+...+n _p , and A is a N × N real matrix with all its principal submatrices nonsingular. We establish relations with the theory of interpolation and approximation.     

Pinning of quantized vortices in helium drops by dopant atoms and molecules

Using a density functional method, we investigate the properties of liquid 4He droplets doped with atoms (Ne and Xe) and molecules ( SF6 and hydrogen cyanide). We consider the case of droplets having a quantized vortex pinned to the dopant. A liquid-drop formula is proposed that accurately describes the total energy of the complex and allows one to extrapolate the density functional results to large N. For a given impurity, we find that the formation of a dopant+vortex+(4)He(N) complex is energetically favored below a critical size N(cr). Our results support the possibility to observe quantized vortices in helium droplets by means of spectroscopic techniques.     

Preparation of hybrid film with superhydrophobic surfaces based on irregularly structure by emulsion polymerization

A superhydrophobic surface originated from quincunx-shape composite particles was obtained by utilizing the encapsulation and graft of silica particles to control the surface chemistry and morphology of the hybrid film. The composite particles make the surface of film form a composite interface with irregular binary structure to trap air between the substrate surface and the liquid droplets which plays an essential role in obtaining high water contact angle and low water contact angle hysteresis. The water contact angle on the hybrid film is determined to be 154 ± 2° and the contact angle hysteresis is less than 5°. This is expected to be a simple and practical method for preparing self-cleaning hydrophobic surfaces on large area.     

Efficient Electrocarboxylation of p-Methylpropiophenone in the Presence of Carbon Dioxide

In the one compartment electrochemical cell 2‐hydroxy‐2‐p‐tolyl‐butyric acid methyl ester was electrosynthesized by electrochemical carboxylation of p‐methylpropiophenone in the presence of carbon dioxide. Under galvanostatic conditions, the electrocarboxylation was influenced by supporting electrolytes, cathode materials, the current density, passed charge and temperatures. Application scope of the eletrocarboxylation system was then examined, and an excellent yield of 97% was obtained when the electrolysis was carried out in DMF‐0.1 mol·L^?1 TEABr solution using cheap and environmentally benign nickel as the cathode under a controlled current density of 5.0 mA·cm^?2 until 2.8 F·mol^?1 charge passed through the cell at ?10°C. The electrochemical behavior of p‐methoxylacetophenone has been studied on the glassy carbon electrode by cyclic voltammetry and the probable mechanism was proposed accordingly.     

A new alkaloid from Lycoris aurea

A new alkaloid was isolated from the bulbs of Lycoris aurea(L'Herit.) Herb.Its structure was established as 3-o-ethyltazettinol through chemical and spectroscopic studies including 2D NMR.     

Water and fluorinated alcohol mediated/promoted tandem insertion/aerobic oxidation/bisindolylation under metal-free conditions: Easy access to bis(indolyl)methanes

A green tandem reaction, including insertion/aerobic oxidation/bisindolylation, starting from indoles and diazo compounds has been developed. The combination of water and fluorinated alcohol plays dual roles as solvent and promoter in this chemical transformation. Molecular oxygen in the air acts as an oxidant. 3,3′-Bis(indolyl)methanes with quaternary carbon were produced under metal-free conditions. No any catalyst and additive were required. N₂ and water were released as sole by-products. Absence of water and fluorinated alcohol resulted in Wolff rearrangement product.     

Some Observations Concerning Thallium Electrodeless Discharge Tubes

The suitability of thallium halide electrodeless discharge tubes as a radiation source for atomic fluorescence was investigated. Effects of various parameters, affecting the emission intensities, were investigated.