基于声矢量传感器的水声通信技术研究

基于声矢量传感器声压和振速联合加权处理可以提高空间处理增益的原理,将声矢量传感器应用于相位调制的高速水声通信中,并结合自适应均衡算法,研究了相干解调和解码的方法。基于声矢量传感器声强处理可以抵消各向同性干扰、提高信噪比的原理,研究了在频率调制的水声通信系统中,利用声强解码代替声压解码的方法。理论分析、仿真研究和湖上试验结果表明:利用声矢量传感器相对于声压传感器来说,可以提高解码处理增益,进而提高了水声通信系统的作用距离、降低误码率。     

The Crystallization of Poly (3-dodecyltbiophene) in an Oriented Solidification Environment

Poly (3-alkylthiophenes) (P3ATs) have made up of a family of conductive polymerswhich are soluble, fusible and processable, since the introduction of flexible alkyl sidechains"'. It is generally accepted that P3ATs can form similar layered structures. inwhich the thiophene rings possess planarity and the side chains act as spacers'-'. Whenthe number. of 'carbon atoms of alkyl side chains is more than 10, some orderlyarrangements will occur for side chains betWeen the' layers'. It has been w…     

New enantiomeric polylactide-block-poly(butylene succinate)-block-polylactides: syntheses, characterization and in situ self-assembly

In situ self-assemblies of new biodegradable triblock PLLA-b-PBS-b-PLLA and PDLA-b-PBS-b-PDLA have been investigated in acetonitrile solution. At first, two series of PLLA-b-PBS-b-PLLA and PDLA-b-PBS-b-PDLA, respectively denoted as the P and Q triblock copolyester series, were prepared with fixed PBS block ((overline) M(n,NMR) = 6.9 kDa) and diverse enantiomeric PLLA/PDLA blocks. Further, their chemical structures and thermal properties were characterized by means of titration, nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), polarimeter, wide-angle X-ray diffraction (WAXD) and thermal analytical instruments. When mixing the synthesized enantiomeric copolyester pairs denoted as P(1)/Q(1) - P(8)/Q(8) in acetonitrile solution at 60 degrees C, in situ self-assemblies were found to happen for the P(4)/Q(4) to P(8)/Q(8) pairs, bearing longer enantiomeric PLA block lengths. DSC and WAXD analysis of the self-assembled microparticles demonstrated that PLLA/PDLA racemic crystals were formed for the P(5)/Q(5) - P(8)/Q(8) systems, as evidenced by their melting points over 200 degrees C, and a new X-ray diffraction peak detected at 2theta = 11.8 degrees . Moreover, morphological studies by scanning electron microscopy (SEM) indicated the formation of disk- or platelet-like microparticles. It was noted that the diameters of the microparticles self-assembled in situ decreased from 1.28-1.50 mum down to 480-660 nm, through tailoring the enantiomeric PLA block length. Other factors, such as a central PBS block, the enantiomeric block length and the preparation conditions were suggested to play important roles in the in situ self-assembly of these enantiomeric triblock copolyesters. These results provide a facile way to self-assemble hydrophobic, biodegradable microparticles, through tuning the important van der Waals stereocomplexation interactions between two enantiomeric blocks in solution.     

单部件可修系统的一个几何过程维修模型

本文研究了单部件、一个修理工组成的可修系统的最优更换问题,假定系统不能修复如新,以系统年龄T为策略,利用几何过程求出了最优的策略T^*,使得系统经长期运行单位时间内期望效益达到最大,并求出了系统经长期运行单位时间内期望效益的显式表达式。在一定条件下证明了T^*的唯一存在性。最后还证明了策略T^*比文献[6]中的策略T^*优。     

基于自适应方法的Sn／O／H／N／C／Cl反应机理简化

计算包含详细反应机理的复杂反应流问题仍然是十分费时的,已有的反应流计算方法通常采用简化的化学反应机理.传统的机理简化方法大多基于反应条件的稳态假设,如主量组分分析法等.近年来,一种基于自适应化学理论的机理简化的新方法被提出.该方法根据设定的化学精度要求,可实现详细反应机理的最优简化.对Sn/O/H/N/C/Cl详细反应机理的简化结果表明Sn CO2=SnO CO和Sn O2=SnO O为机理中影响Sn氧化最重要的两个基元反应.     

用于彩色目标跟踪的改进粒子群优化算法

提出一种用于彩色目标跟踪的改进粒子群优化算法(Improved Particle Swarm Optimization Algorithms,IP-SOA)。针对彩色目标,选择加权彩色直方图作为目标的特征,选用Bhattacharyya系数作为特征相似性度量,其最大值位置表示目标位置。对粒子群优化算法进行了改进,即自动调整惯性权重函数与认知学习因子,每次递推时对粒子速度、单帧位移总量加以限制,对Bhattacharyya系数优化,快速求取函数最大值位置。利用彩色序列图像进行仿真实验,结果表明,该方法能够实时跟踪飞机、车辆等目标,在目标被部分遮挡时能稳健跟踪。     

Optimization of thin-film design for multi-layer dielectric grating

Thin-film design used to fabricate multi-layer dielectric (MLD) gratings should provide high transmittance during holography exposure, high reflectance at use wavelength and sufficient manufacturing latitude of the grating design making the MLD grating achieve both high diffraction efficiency and low electric field enhancement. Based on a (HLL)⁹H design comprising of quarter-waves of high-index material and half-waves of low-index material, we obtain an optimum MLD coating meeting these requirements by inserting a matching layer being half a quarter-wave of Al₂O₃ between the initial design and an optimized HfO₂ top layer. The optimized MLD coatings exhibits a low reflectance of 0.017% under photoresist at the exposure angle of 17.8° for 413 nm light and a high reflectance of 99.61% under air at the use angle of 51.2° for 1053 nm light. Numerical calculation of intensity distribution in the photoresist coated on the MLD film during exposure shows that standing-wave patterns are greatly minimized and thus simulation profile of photoresist gratings after development demonstrates smoother shapes with lower roughness. Furthermore, a MLD gratings with grooves etched into the top layer of this MLD coating provides a high diffraction efficiency of 99.5% and a low electric field enhancement ratio of 1.53. This thin-film design shows perfect performances and can be easily fabricated by e-beam evaporation.     

Strongly Correlated Effect in TiS2

The thermoelectric compound TiS2 is studied by using the full-potential linearized augmented plane-wave method on the density functional theory with the generalized gradient approximation （GGA） as well as the on-site Coulomb interaction correction （＋U）. The Seebeck coefficient of TiS2 is calculated based on the electronic structure obtained within the GGA under the consideration of the on-site Coulomb interaction. The calculated Seebeck coefficient at 300K shows that Coulomb interaction U in the range of 4.97-5.42eV is important to reproduce the experimental data. The obtained energy gap Eg around 0.05 eV indicates that TiS2 is an indirect narrow-gap semiconductor.     

Synthesis and shape memory behavior study of hyperbranched poly(urethane-tetrazole)

A novel hyperbranched poly(urethane-tetrazole)(HPUTZ) was synthesized via the A2+BB2' approach using hexadiisocyanate(HDI) and 3-(bis-(2-hydroxyethyl)) aminopropyltetrazole(HAPTZ).The molecular structure was characterized by FTIR and 1H NMR spectroscopy.The number average molecular weight was measured to be 1.05×104 g/mol with a polydispersity of 1.27 by GPC analysis.The HPUTZ was further cured by the semi-adduct(PEG-IPDI) from polyethylene glycol(PEG) reacting with isophorone diisocyanate(IPDI) to form th...     

Potential measurement in ECT system

Potential measurement can be applied to electrical capacitance tomography (ECT) systems. However, the relationship between potential and the capacitance is not well understood. This paper reveals that a potential is dependent on the capacitance ratio for a given excitation voltage, independent of capacitance themselves. The conditions for using this method are discussed. Finally, image reconstruction based on the Generic Algorithm for Electrical Capacitance Tomography (GA-ECT) is implemented satisfactorily for square and circular sensors respectively.