C_（60）化学修饰的PNVC材料的UV－VIS谱研究

本实验采用金属有机化学方法成功地将富勒烯分子引入到ＰＮＶＣ侧链形成ＣＢＰ（ＣｈａｒｍＢｒａｃｅｌｅｔＰｏｌｙｍｅｒ）型共聚功能材料，研究了其ＵＶ－ＶＩｓ谱行为。结果表明，Ｃ_（６０）或Ｃ_（６０）／Ｃ_（７０）混合物化学修饰的产物其紫外可见谱明显向长波方向移动，谱峰范围由２８０ｎｍ扩展至８７０ｎｍ。Ｃ_（６０）含量增加，红移程度增大，在可见区域的吸收程度亦增加。产物主要存在５个特征峰，分别位于２１５ｎｍ、２６５ｎｍ、２９８ｎｍ、３３５ｎｍ、３４５ｎｍ处，其中２１５ｎｍ峰为Ｃ_（６０）仅存的特征峰。最后讨论了不同合成条件与产物硝化处理对其ＵＶ－ＶＩＳ谱行为的影响。     

On the mechanism of electroluminescence emission by porous silicon layers

The analytical treatment of a model considering the electrooxidation of p-porous silicon layers under galvanostatic conditions is able to give account of experimental facts such as the shape and location of the electroluminescence peak as well as of the spectral shift of the electroluminescence peak produced by oxidation. The proposed model considers electroluminescence to be the result of electron injection into the conduction band by an adsorbed intermediate produced by electrooxidation of the surface coverage with hydrogen or siloxene of the silicon nanocrystallites. The access of holes to the surface is made possible by low accumulation layer conditions and is the rate determining step in the electroluminescence mechanism. In this way it is possible to give a satisfactory explanation to the shift towards the blue experimented by the electroluminiscence emission maximum as a consequence of electrooxidation.     

Poly[3-(3,4-dihydroxyphenyl)glyceric acid] from Stems of <Emphasis Type="Italic">Symphytum asperum</Emphasis> and <Emphasis Type="Italic">S. caucasicum</Emphasis>

Two high-molecular-weight (>1000 kDa) water-soluble preparations were isolated from stems of Symphytum asperum and S. caucasicum. Their basic component was established as poly[hydroxy-1-carboxy-2-(3,4-dihydroxyphenyl)ethylene], analogous to that of high-molecular-weight (>1000 kDa) preparations from roots of these same plants, using IR and NMR spectral data. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 303–305, July–August, 2005. An erratum to this article is available at .     

An overview of laboratory performance studies conducted by the IAEA for marine pollution studies of metals and organic contaminants

Aspects of the International Atomic Energy Agency (IAEA) Analytical Quality Control Services (AQCS) for marine environmental studies are discussed, focusing on recent laboratory performance studies (LPS) and the production of reference materials for trace metals and organic compounds in various marine matrices. The IAEA has organized seventeen global interlaboratory studies for a range of organic contaminants. Of note has been the inclusion of numerous polychlorinated biphenyl congeners (PCBs) and some sterols of anthropogenic origin. Concurrently, there have been eleven worldwide intercomparison exercises for trace metals in the marine environment, most of which included methylmercury. Although such interlaboratory studies can help improve performance in individual laboratories and regional laboratory networks, the results reveal that problems remain in the determination of some metals and many organic contaminants.     

CuSO<Subscript>4</Subscript> as a Mild,Green, and Efficient Catalyst for the One-pot Conversion of <Emphasis Type="Italic">THP</Emphasis> Ethers to Acetates

Summary. An efficient direct conversion of THP ethers into the corresponding acetates was achieved with acetic anhydride in the presence of CuSO₄ · 5H₂O as an available and green catalyst in high yields.     

Fenugreek mucilage as a flocculating agent for sewage treatment

The use of fenugreek mucilage, a natural polysaccharide and a direct food additive, as a flocculating agent for removal of suspended and dissolved solids from sewage effluent has been reported. A flocculation study has been done by the standard jar test method. The percent removal of suspended solid (SS) and dissolved solid (TDS) was determined by varying the polymer dose, pH and contact time. X-ray diffraction patterns of the solid waste material of mucilage and flocs (so obtained after treatment) were used to suggest the incorporation of the crystalline waste material in the mucilage. The optimal mucilage concentration was found to be 0.16 mg/l. The suitable pH range for maximum solid removal (SS and TDS) was alkaline and the time required for treatment was 1-3 h.     

Evaluation of measurement uncertainty for analytical procedures using a linear calibration function

In the EURACHEM/CITAC draft ”Quantifying uncertainty in analytical measurement” estimations of measurement uncertainty in analytical results for linear calibration are given. In this work these estimations are compared, i.e. the uncertainty deduced from repeated observations of the sample vs. the uncertainty deduced from the standard residual deviation of the regression. As a result of this study it is shown that an uncertainty estimation based on repeated observations can give more realistic values if the condition of variance homogeneity is not correctly fulfilled in the calibration range. The complete calculation of measurement uncertainty including assessment of trueness is represented by an example concerning the determination of zinc in sediment samples using ICP-atomic emission spectrometry. Received: 9 February 2002 Accepted: 17 April 2002     

An expeditious,solvent-free synthesis of some 5-aryl-2-(2-hydroxyphenyl)-1,3,4-oxadiazoles

An efficient, rapid, microwave-accelerated one-step synthesis of some 5-aryl-2-(2-hydroxy-phenyl)-1,3,4-oxadiazoles by reaction of salicylic hydrazide with carboxylic acids in the presence of thionyl chloride under neat conditions is described. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1264–1267, August, 2007.     

Relativistic calculations on the ground and excited states of AgH and AuH in cylindrical harmonic confinement

The relativistic ground and low-lying excited state potential energy curves of AgH and AuH in the presence of a cylindrical harmonic confining potential were calculated using the multi-state multi-reference perturbation theory with the spin-free no-pair Hamiltonian obtained via the third-order Douglas–Kroll transformation, incorporated with the full two-electron Breit–Pauli spin–orbit operator. The spectroscopic parameters were obtained for both the scalar- and quasi-relativistic potentials. The spin–orbit coupling constants were calculated for several strengths of the confining potential, and the effects of the applied potential on the coupling constants were analyzed using configuration interaction. This paper is dedicated to Serafín Fraga—colleague, mentor, and friend.     

Drag on two nonuniformly structured flocs moving along the axis of a cylindrical tube

The boundary effect on the drag on two identical, nonuniformly structured flocs moving along the axis of a cylindrical tube filled with a Newtonian fluid is investigated at a small to medium larger Reynolds number. A two-layer model is adopted to simulate various possible structures of a floc, and the flow field inside is described by Darcy–Brinkman model. The results of numerical simulation reveal that a convective flow is present in the rear region of a floc when Reynolds number is on the order of 40. The presence of the tube wall and/or the porous structure of a floc has the effect of reducing that convective flow. For a fixed level of the volume-average permeability of a floc, the influence of the tube wall on the drag depends upon floc structure; the influence on a nonuniformly structured floc is more significant than that on a uniformly structured floc. The more nonuniform the floc structure, the more appreciable the deviation of the drag coefficient–Reynolds number curve from a Stokes’-law-like relation becomes. The smaller the volume-average permeability of a floc and/or the smaller the separation distance between the two flocs, the greater is the deviation, but the presence of the tube wall has the effect of reducing that deviation.