Ultrahigh sensitivity electric field detection with a liquid electro-optical film

In this Letter, an electro-optical probe configuration with polar molecule liquids as the sensing film is proposed to improve the voltage sensitivity. This method exhibited increases in intrinsic sensitivities better than 0.1 mV/√Hz, 2 orders of magnitude larger than the normal method using a GaAs probe in the same measurement system. Based on the mechanism of orientation polarization, the electro-optic coefficient was measured to be 250 pm/V by the Teng-Man method at a modulation field of 100 Hz. This technology will be promising in applications of low-frequency field detection.     

Faithful teleportation of multi-particle states involving multi spatially remote agents via probabilistic channels

We present an approach to faithfully teleport an unknown quantum state of entangled particles in a multi-particle system involving multi spatially remote agents via probabilistic channels. In our scheme, the integrity of an entangled multi-particle state can be maintained even when the construction of a faithful channel fails. Furthermore, in a quantum teleportation network, there are generally multi spatially remote agents which play the role of relay nodes between a sender and a distant receiver. Hence, we propose two schemes for directly and indirectly constructing a faithful channel between the sender and the distant receiver with the assistance of relay agents, respectively. Our results show that the required auxiliary particle resources, local operations and classical communications are considerably reduced for the present purpose.     

A Quantum Watermark Protocol

Quantum watermarking is the technique which embeds the invisible quantum signal such as the owner’s identification into quantum multimedia data (such as audio, video and image) for copyright protection. In this paper, a watermark strategy for quantum images is proposed based on flexible representation for quantum images (FRQI). Compared with the former strategy, which can only be used to verify the identity of the true owner of a carrier image, the proposed method can be used to find out who is the real owner, and our strategy’s capacity reaches the largest. It is impossible for anyone except the copyrighter to clear off or extract the watermark images.     

Relationship between Dispersive Surface Tension and Density and Molecular Weight of Solvents and Polymers

The surface and interfacial properties of polymers are important for their applications. Generally, the surface property is quantitatively characterized by the surface tension or surface tension component parameters, which are obtained with the contact angle technique. However, the contact angle technique has an inherent problem, contact angle hysteresis phenomenon, which will result in many incredible surface tension data. In order to find a simple and easy method to estimate the rationality of a surface tension result, the relationship between dispersive surface tension component and density and molecular weight is researched in this work. It is found that for 30 organic solvents, there is a good relationship between the dispersive surface tension r^d and the parameter . In addition, for 12 polymers, when the molecular weight is replaced with the molecular weight of the repeat unit, there is still the same relationship as for small liquids. However, because it is difficult to judge the accuracy of the published dispersive data of the polymers, the found experiential relationship needs further confirmation, requiring more reliable published data.     

Autaptic modulation-induced neuronal electrical activities and wave propagation on network under electromagnetic induction

Based on an improved HR neuron model, the effects of electrical and chemical autapses on the firing activities of single neurons are studied, and the wave propagation in forward feedback neural network is also discussed by considering autapstic regulation under different intensities of electromagnetic induction. It is found that the electrical activities of single neuron can be changed by exerting excitatory or inhibitory of electrical and chemical autapses. With different feedback gains of electromagnetic induction current, membrane potential shows the oscillatory solutions and steady states. Under the condition of different autapse or electromagnetic induction, the propagation of electrical activities caused by the central neuron is transformed in the forward feedback network. Moreover, the spatial synchronization of the network will be changed by choosing different coupling intensities and feedback gains. It is proved that the electrical and chemical autapses play a significant role in firing modes of single neuron and the wave propagation of the forward feedback networks under the electromagnetic induction.     

Highly efficient diode-pumped actively Q-switched Nd:YAG-SrWO(4) intracavity Raman laser

A highly efficient diode-pumped actively Q-switched intracavity Raman laser with SrWO(4) as the Raman-active medium is presented. As high as 23.8% diode-to-Stokes optical conversion efficiency is obtained with an incident pump power of 7.17 W and a pulse repetition rate of 15 kHz.     

Electrolytic coloration of O2-doped NaCl crystals

O₂²⁻-doped NaCl crystals are colored electrolytically by using a pointed cathode and a flat anode at various temperatures and voltages, which mainly benefit from appropriate coloration temperatures and voltages as well as anode structure of used electrolysis apparatus. Characteristic OH⁻, U, V₂^m, U_A, V₂, V₃, O²⁻-V_a⁺ complex, F, R₁, R₂ and M absorption bands are observed in absorption spectra of the colored crystals. Production and conversion of color centers in electrolytic coloration is explained. Current-time curves for electrolytic colorations and their relationships with electrolytic colorations were given.     

Fabrication of silicon microwire arrays for?photovoltaic?applications

A?novel method of combining photolithography, wet chemical etching and oxidation process was proposed to fabricate large area of silicon microwire (SiMW) arrays. The dimensions of the SiMWs can be easily controlled by photomask and etching conditions. Solar cells based on the heterojunction between SiMW and double-walled carbon nanotubes (DWNTs) were constructed. The initial test on the DWNT/SiMW shows efficiency (??) of?0.59%. By adding a few drops of HBr/B₂ electrolyte, the efficiency was improved to 1.96% with J _sc=19.2?mA/cm² and V _oc=0.35?V, FF=29.2%, showing the potential of SiMWs in photovoltaic applications.     

Guided wave propagation in single and double layer hollow cylinders embedded in infinite media

Millions of miles of pipes are being used for the transportation, distribution, and local use of petroleum products, gas, water, and chemicals. Most of the pipes are buried in soil, leading to the significance of the study on the subject of guided wave propagation in pipes with soil influence. Previous investigations of ultrasonic guided wave propagation in an elastic hollow cylinder and in an elastic hollow cylinder coated with a viscoelastic material have led to the development of inspection techniques for bare and coated pipes. However, the lack of investigation on guided wave propagation in hollow cylinders embedded in infinite media like soil has hindered the development of pipe inspection methods. Therefore the influence of infinite media on wave propagation is explored in this paper. Dispersion curves and wave structures of both axisymmetric and nonaxisymmetric wave modes are developed. Due to the importance of the convergence of numerical calculations, the requirements of thickness and element number of the finite soil layer between hollow cylinder and infinite element layer are discussed, and an optimal combination is obtained in this paper. Wave structures are used for the mode identification in the non-monotonic region caused by the viscoelastic properties of coating and infinite media.     

A simple solution-immersion process for the fabrication of superhydrophobic cupric stearate surface with easy repairable property

The present work reports a simple and time-saving method to fabricate cupric stearate film on zinc substrate by a solution-immersion process. Superhydrophobic surfaces are conventionally prepared employing two steps: roughening a surface and lowering its surface energy. The fabrication of superhydrophobic cupric stearate surface is reported using a one-step process by immersing a zinc plate coated with copper into the stearic acid solution, simplifying the complexity of two different steps involved in the conventional methods. The surface of the zinc plate coated with copper is found to be covered with low surface energy cupric stearate film providing the water contact angle of 160 ± 1° with the rolling off properties. In addition, the damaged superhydrophobic surface can restore superhydrophobicity property by immersing the surface into the stearic acid solution again.