Ku波段扩展互作用速调管设计

微波电真空器件随着频率的升高,不但聚焦系统难以实现,而且其输出增益和带宽都受到很大的限制,要解决该问题,建议采用扩展互作用速调管,采用分布作用谐振腔技术来扩展其工作带宽和提高增益。利用CST和粒子模拟(PIC)3维软件对其工作在Ku波段扩展互作用速调管进行了设计和仿真,在工作电压30 kV、束流8.5 A的条件下,聚焦系统采用幅值为0.48 T的周期反转永磁聚焦,在输入功率为5.1 W时,得到效率为23%,3 dB带宽为306 MHz,频带内最大增益为39 dB,其峰值功率为58 kW的微波输出。     

微弱电流高精度自动测量系统

为了实现辐射探测中对微弱电流信号的实时准确测量,设计了一套微弱电流测量系统。介绍了系统的工作原理,及I-V转换和放大单元的低噪声抗干扰设计、-△模数转换技术和单片机程序的设计。系统通过USB与计算机进行通信,计算机应用软件可以完成采集频率和量程控制、数据处理、显示和存储等功能。经过验证,该系统能满足10-13~10-3 A的大动态微弱电流测量,分辨力为四位半, 能自动量程判断,具有较高的精度和稳定性,已成功应用于辐射探测实验。     

Dendritic and eutectic growth in Sb<Subscript>60</Subscript>Ag<Subscript>20</Subscript>Cu<Subscript>20</Subscript> ternary alloy

The rapid solidification of Sb60Ag20Cu20 ternary alloy was realized by high undercooling method, and the maximum undercooling is up to 142 K (0.18TL). Within the wide undercooling range of 40-142 K, the solidified microstructures are composed of (Sb), θand ε phases. High undercooling enlarges the solute solubility of (Sb) phase, which causes its crystal lattice to expand and its crystal lattice constants to increase. Primary (Sb) phase grows in two modes at small undercoolings non-faceted dendrite growth is the main growth form; whereas at large undercoolings faceted dendrite growth takes the dominant place. The remarkable difference of crystal structures between (Sb) and θphases leads to (θ Sb) pseudobinary eutectic hard to form, whereas strips of θform when the alloy melt reaches the (θ Sb) pseudobinary eutectic line. The cooperative growth of θand ε phases contributes to the formation of (ε θ) pseudobinary eutectic easily. In addition, the crystallization route has been determined via microstructural characteristic analysis and DSC experiment.     

半透明介质中辐射传递方程的反演计算及数值模拟

本文介绍了一侧为半透明、另一侧为非透明界面时一维半透明介质的辐射强度计算式。采用辐射与导热复合换热模型计算半透明介质内温度场。利用已知的温度场求半透明介质的辐射强度一正问题计算。将此辐射强度代入辐射反问题计算模型，引入测量误差，采用Ｃｈａｈｉｎｅ方法及演半透明介质内温度场一反问题计算。数值模拟表明，本文所采用的辐射反演法具有较高的精度及稳定性。     

一种新型微透镜阵列成象式投影光刻系统的研究

从理论和实验两方面入手,系统地研究了微透镜阵列的形成原理和制作工艺,分析了微透镜阵列的面形结构,得到了联系微透镜阵列矢高与制作工艺参量的经验公式.并且将四片微透镜阵列耦合,形成一个深紫外光刻的1:1成象的多孔径微小光刻系统.从几何光学理论出发,分析了这个光刻系统综合成象的特点,讨论了这种光刻系统的光学性能,并给出了实验测量方法.     

X-ray spectra induced by slow highly charged Ar q + ions in collision with Nb surface

The X-ray spectra of Nb surface induced by Ar ^q+ (q = 16,17) ions with the energy range from 10 to 20 keV/q were studied by the optical spectrum technology. The experimental results indicate that the multi-electron excitation occurred as a highly charged Ar¹⁶⁺ ion was neutralized below the metal surface. The K shell electron of Ar¹⁶⁺ was excited and then de-excited cascadly to emit K X-ray. The intensity of the X-ray emitted from K shell of the hollow Ar atom decreased with the increase of projectile kinetic energy. The intensity of the X-ray emitted from L shell of the target atom Nb increased with the increase of projectile kinetic energy. The X-ray yield of Ar¹⁷⁺ is three magnitude orders larger than that of Ar¹⁶⁺. Supported by the National Natural Science Foundation of China (Grant Nos.10774149 and 10405025)     

Structural and electronic properties of type-I and type-VIII Ba8Ga16Sn30 clathrates under compression

The total energy and electronic structures for type-I (β phase) and type-VIII (α phase) Ba₈Ga₁₆Sn₃₀ clathrates under hydrostatic pressure have been investigated using density functional theory (DFT) calculations. It was found that the type-VIII phase is more stable than the type-I one at ambient conditions and that β→α phase transition can not occur under hydrostatic pressure. The band structures show that the type-I and type-VIII Ba₈Ga₁₆Sn₃₀ are indirect semiconductors with band gaps of 0.24 eV and 0.19 eV, respectively. The results suggested that type-I clathrate Ba₈Ga₁₆Sn₃₀ has a larger value of the thermoelectric (TE) power than that of type-VIII clathrate. We found that pressure tuning changes the k-point of conduction band minimum (CBM) in the Brillouin zone for β-phase, but it is not the case for α-phase. Furthermore, the results show that the pressure can change the interaction between guest atoms and the host lattice, and consequently results in the decrease of the band gap of β-phase and the increase of the band gap of α-phase, indicating that the pressure effect can play an important role in the magnitude of the TE power.     

Tomographic diffractive microscopy with a wavefront sensor

Tomographic diffractive microscopy is a recent imaging technique that reconstructs quantitatively the three-dimensional permittivity map of a sample with a resolution better than that of conventional wide-field microscopy. Its main drawbacks lie in the complexity of the setup and in the slowness of the image recording as both the amplitude and the phase of the field scattered by the sample need to be measured for hundreds of successive illumination angles. In this Letter, we show that, using a wavefront sensor, tomographic diffractive microscopy can be implemented easily on a conventional microscope. Moreover, the number of illuminations can be dramatically decreased if a constrained reconstruction algorithm is used to recover the sample map of permittivity.