远红外激光等离子体散射系统的校准方法

本文依据多普勒效应,提出了利用转动细针对远红外激光的散射来模拟等离子体源对远红外激光的散射,从而对远红外激光等离子体散射系统进行校准,为完成等离子体散射实验作好准备。     

单层介质膜保偏全反射直角三棱镜镀膜材料的选择及其微分相位特性研究

入射角、基底玻璃折射率、膜介质折射率、膜厚等因素会影响单层介质膜保偏全反射直角三棱镜的保偏特性，且各因素的影响程度并不相同。本文分析了上述各因素的微小变化对保偏特性的影响，并提出了选择膜介质的方法     

一种新型微透镜阵列成象式投影光刻系统的研究

从理论和实验两方面入手,系统地研究了微透镜阵列的形成原理和制作工艺,分析了微透镜阵列的面形结构,得到了联系微透镜阵列矢高与制作工艺参量的经验公式.并且将四片微透镜阵列耦合,形成一个深紫外光刻的1:1成象的多孔径微小光刻系统.从几何光学理论出发,分析了这个光刻系统综合成象的特点,讨论了这种光刻系统的光学性能,并给出了实验测量方法.     

微分电位溶出分析法应用于金膜电极的研究

本文介绍将微分电位溶出分析法应用于金膜电极,建立了相应的理论体系和应用条件。可使用的金膜厚度在1.8×10~(-7)～4.3×10~(-7)cm范围。检测限较原法降低近两个数量极。用本法测定花生乳中的铜,回收率在94～102%间。     

Reaction kinetics of stover liquefaction in recycled stover polyol

The purpose of this research was to study the kinetics of liquefaction of crop residues. The liquefaction of corn stover in the presence of ethylene glycol and ethylene carbonate using sulfuric acid as a catalyst was studied. It was found that the liquefaction yield was a function of ratio of solvent to corn stover, temperature, residence time, and amount of catalyst. Liquefaction of corn stover was conducted over a range of conditions encompassing residence times of 0–2.5 h, temperatures of 150–170°C, sulfuric acid concentrations of 2–4% (w/w), and liquefaction reagent/corn stover ratio of 1–3. The liquefaction rate constants for individual sets of conditions were examined using a first-order reaction model. Rate constant increased with the increasing of liquefaction temperature, catalyst content, and liquefaction reagent/corn stover ratio. Reuse of liquefied biomass as liquefying agent was also evaluated. When using recycled liquefied biomass instead of fresh liquefaction reagent, the conversion is reduced. It appeared that 82% of liquefaction yield was achieved after two times of reuse.     

冰片基氯化镁与苯甲醛、对一硝基苯甲醛的还原反应

本文研究了冰片基氯化镁与苯甲醛、对-硝基苯甲醛的还原反应。冰片基氯化镁与苯甲醛的反应得到苯甲醇和相应的氧化产物冰片烯以及还原缩合产物安息香;而与对-硝基苯甲醛的反应,则得到4,4`-二硝基安息香和冰片烯。     

Crystallization of Ge2Sb2Te5 phase—change optical disk media

In this paper, the crystallization behaviour of amorphous Ge₂Sb₂Te₅ thin films is investigated using differential scanning calorimetry), x-ray diffraction and optical transmissivity measurements. It is indicated that only the amorphous phase to face-centred-cubic phase transformation occurs during laser annealing of the normal phase-change structure, which is a benefit for raising the phase-change optical disk's carrier-to-noise ratio (CNR). For amorphous Ge₂Sb₂Te₅ thin films, the crystallization temperature is about 200℃ and the melting temperature is 546.87℃. The activation energy for the crystallization, E_a, is 2.25eV. The crystallization dynamics for Ge₂Sb₂Te₅ thin films obeys the law of nucleation and growth reaction. The sputtered Ge₂Sb₂Te₅ films were initialized by an initializer unit. The initialization conditions have a great effect on the reflectivity contrast of the Ge₂Sb₂Te₅ phase-change optical disk.     

拉压性能不同材料的几种结构的极限分析

给出了拉压性能不同材料（简称具有Ｓ－Ｄ效应的材料）的几种结构的极限载荷公式。揭示出材料的拉压性能不同对几种结构承载能力的影响规律。所给出的极限载荷公式可供工程设计人员参考。     

拉压性能不同材料全量型本构关系及厚壁筒的应力分析

将经典全量理论作了推广，考虑了应力状态及塑性体积变形对拉压性能不同材料的塑性行为的影响。应用该本构模型分别计算了厚壁筒在内压和外压作用下的应力分布。给出了径向应力、环向应力和轴向应力沿壁厚的分布图。将本文的计算解与拉压性能相同(不考虑体积变形、强化曲线唯一)的幂函数强化材料的厚壁筒的理论解进行了比较。结果表明，材料的拉压性能不同对厚壁筒的环向应力和轴向应力影响较大。因此，对于拉压性能不同材料，考虑到其对应力状态及塑性体积变形敏感时，是不能将其简化成拉压性能相同、体积不可压缩、强化曲线唯一的理想材料。