三聚甲醛的等离子体引发固相开环聚合

１前言聚甲醛的内聚能密度高，聚集紧密，结晶度较高。它的突出优点是刚性高，硬度大，耐蠕变性和耐疲劳性优异。另外，它的强度和冲击性能好，因此，具有广泛的应用价值［１］。有人利用γ－射线［２－５］，α－射线［６］和Ｘ－射线［７］照射三苯甲醛使其在固态下开环...     

Synthesis of MCM-22 zeolite by an ultrasonic-assisted aging procedure

The synthesis of MCM-22 zeolite under hydrothermal crystallization conditions has been performed by an ultrasonic-assisted aging procedure. The ultrasonic-assisted aging of the initial aluminosilicate gel can shorten the crystallization time of MCM-22, decrease the amount of hexamethyleneimine (HMI) used, and broaden the range of SiO(2)/Al(2)O(3) ratios. By using the ultrasonic aging, pure phase of high-silica MCM-22 products with SiO(2)/Al(2)O(3)>100 can be obtained. When SiO(2)/Al(2)O(3) 相似文献   

Negative effect on molecular planarity to achieve organic ternary memory: triphenylamine as the spacer

Adjusting the spacers between the electron-acceptor and the elector-donor is important to design organic ternary memory material but rarely reported. In this paper, two small molecules, ZIPGA and ZIPCAD with benzene ring or triphenylamine as the spacers, were designed and synthesized to fabricate memory devices. The Al/ZIPGA/indium-tin oxide (ITO) device showed ternary characteristics, whereas Al/ZIPCAD/ITO had no obvious memory characteristics. Density functional theory calculation, X-ray diffraction (XRD) and atomic force microscopy (AFM) were employed to interpret the different memory properties. ZIPGA thin film has the closer intermolecular packing and flatter surface morphology than ZIPCAD film, which was favorable to the electron migration. This work demonstrates the importance of spacers and reveals that triphenylamine may be not a good spacer in design of new memory material.     

A Review on the Extraction,Bioactivity, and Application of Tea Polysaccharides

Tea is a non-alcoholic drink containing various active ingredients, including tea polysaccharides (TPSs). TPSs have various biological activities, such as antioxidant, anti-tumor, hypoglycemic, and anti-cancer activities. However, TPSs have a complex composition, which significantly limits the extraction and isolation methods, thus limiting their application. This paper provides insight into the composition, methodological techniques for isolation and extraction of the components, biological activities, and functions of TPSs, as well as their application prospects.     

铝改性介孔二氧化硅泡沫载体材料合成及其DBT加氢脱硫性能

介孔二氧化硅泡沫(MCFs)材料具有超大的三维球形孔结构、超大孔容(1.0–2.4 cm3/g)、高比表面(1000 m2/g)、孔径可调范围较广(24–50 nm)且球形孔道之间通过窗口(9–22 nm)联结,因此具有优良的传质性能,能够促进加氢脱硫反应.但是,与传统的微孔分子筛相比,该纯硅类介孔材料酸性较弱,不利于一些酸催化反应;因此,对纯硅材料进行金属改性以增加其酸性,从而促进催化剂的催化活性.而一般对纯硅类介孔材料采用Al,Ti,Zr等金属,铝改性主要是为纯硅载体提供酸性,而钛锆改性则是为了调变活性金属以及促进金属的分散,从而提高催化剂的加氢脱硫活性.因此,我们主要采用后改性方法,以P123为微乳液体系中的表面活性剂,TEOS为硅源,TMB为扩孔剂,异丙醇铝为铝源,成功合成了一系列Si/Al比不同的介孔二氧化硅泡沫材料.通过改变异丙醇铝的加入量,成功合成了系列Si/Al比(x)的NiMo/Al-MCFs(x)(x=10,20,30,40和50)催化剂.对所合成的载体及相应的催化剂通过SAXS,N2吸附脱附,SEM,Py-FTIR,UV-Vis,H2-TPR,NH3-TPD,HRTEM,Raman及27Al MAS NMR等表征手段进行分析,并在高压加氢微反装置上对相应的NiMo负载型催化剂进行DBT HDS活性评价,系统分析了不同硅铝比对催化剂DBT HDS反应活性的影响.SAXS和SEM表征结果表明,Al后改性并没有破坏载体材料的结构;27Al MAS NMR表征结果表明,后改性法能成功把Al掺杂进纯硅材料的骨架中.催化剂UV-Vis和Raman表征结果表明,当Si/Al比为20时,NiMo/Al-MCFs(20)催化剂Mo物种的带隙能量最大,且氧化钼的平均粒径较小,Mo物种在该催化剂中的分散度较好;H2-TPR分析结果表明,NiMo/Al-MCFs(20)催化剂还原温度较低,最易还原.Py-FTIR结果表明,随着Al加入量的增大,其酸性逐渐增大,当Si/Al比为20时酸性达到最大,继续增加Al的加入量,其酸性不再增加;此外,NiMo/Al-MCFs(20)的硫化度最高,且其MoS2的堆垛层数较低.负载活性金属后制备了NiMo/Al-MCFs(x)催化剂,将其应用于DBT加氢脱硫反应,并与传统NiMo/γ-Al2O3催化剂加氢脱硫反应活性作对比.研究发现,所制备的NiMo/Al-MCFs(x)系列催化剂由于具有较大孔径、比表面积及孔容和较强的酸性,因而其DBT HDS活性明显高于传统的工业NiMo/γ-Al2O3催化剂,且催化剂活性在硅铝比达到20时最大,最高可达96%,因此它作为加氢脱硫催化剂载体具有很大的应用前景.     

碳和钇共掺杂对混相TiO2光催化性能的影响

TiO2因其毒性低、稳定性高、制备成本低廉而获得广泛应用,特别是作为光催化剂在降解环境污染物方面受到了广泛关注;然而,纯TiO2较大的光生载流子复合率和较宽的带隙限制了其应用.元素掺杂作为一种拓宽光催化剂光吸收能力的方法广泛应用于各种光催化剂的修饰改性,而两种具有光催化性能的TiO2相共存则能有效抑制光生载流子的复合,因此采取合适的方法有效利用这两种TiO2改性的方法制备得到更具实际应用潜质的光催化剂具有一定的可行性.本文通过简单的溶胶-凝胶过程向锐钛矿相与金红石相组成的混相TiO2中共掺杂碳和钇得到了一种活性较高的可见光响应光催化剂.采用粉末X射线衍射、拉曼光谱、X射线光电子能谱和透射电镜等表征手段研究了碳和钇掺杂对TiO2结构的影响,发现碳掺杂有利于金红石相的形成且材料具有更大的晶粒尺寸,钇掺杂则有利于锐钛矿相的形成且能细化材料的晶粒尺寸,提高材料的比表面积,导致材料更好的光催化活性.材料在30 W荧光灯光照条件下的光催化降解亚甲基蓝(MB)性能的研究显示,C-Y-TiO2样品具有比单掺杂和未掺杂样品更高的光催化活性,其顺序为C-Y-TiO2>Y-TiO2>C-TiO2>TiO2≈P25.此外,降解反应动力学研究表明C-Y-TiO2样品光降解MB的速率是未掺杂样品在相同条件下降解速率的3.5倍.不同钇掺杂含量样品的结构和光催化降解MB的研究结果表明,钇掺杂显著促进了锐钛矿相TiO2的形成.这说明钇可能仅掺杂进入锐钛矿相,因此合适的钇掺杂量才能有效形成最优化的光催化性能的混相TiO2.不同热处理温度下获得的样品的光降解MB特性也表明,一定的热处理温度有利于合适的锐钛矿相和金红石相的组成,从而有利于相间的协同效应.紫外-可见光谱和荧光光谱表征分析表明,碳和钇的掺杂都拓展了其吸收光谱到可见光区域,且抑制了光生电子和空穴对的复合,进而提高了材料的光催化活性.碳和钇共掺杂的混相TiO2具有较高可见光光催化活性的主要原因有两个方面:一是元素掺杂减小了TiO2的带隙使得材料具有可见光响应;二是金属和非金属元素在锐钛矿相与金红石相TiO2中不同的掺杂特性形成的协同效应,抑制了光生电子和空穴的复合.     

三氮唑衍生物随pH变化的双稳态性质

本文设计合成了一系列以三氮唑为电子受体的双生色团化合物。光谱研究表明这些分子的发光性质不仅取决于电子转移驱动力,也取决于间隔基和电子给体的尺寸。有些分子的发光在pH1～3范围内发生急剧变化,荧光量子产率相对于pH值的变化是一个双稳体系而具有光控分子开关性质。     

Antibacterial Nanomaterials: Mechanisms,Impacts on Antimicrobial Resistance and Design Principles

Antimicrobial resistance (AMR) is one of the biggest threats to the environment and health. AMR rapidly invalidates conventional antibiotics, and antimicrobial nanomaterials have been increasingly explored as alternatives. Interestingly, several antimicrobial nanomaterials show AMR-independent antimicrobial effects without detectable new resistance and have therefore been suggested to prevent AMR evolution. In contrast, some are found to trigger the evolution of AMR. Given these seemingly conflicting findings, a timely discussion of the two faces of antimicrobial nanomaterials is urgently needed. This review systematically compares the killing mechanisms and structure-activity relationships of antibiotics and antimicrobial nanomaterials. We then focus on nano-microbe interactions to elucidate the impacts of molecular initiating events on AMR evolution. Finally, we provide an outlook on future antimicrobial nanomaterials and propose design principles for the prevention of AMR evolution.     

Microemulsion polymerization of cationic pyrroles bearing an imidazolum‐ionic liquid moiety

A cationic pyrrole derivative, N‐(4‐butyl‐(1‐methylimidazole)) pyrrole bromide (Py‐Br) bearing an imidazolium‐type ionic liquid moiety was synthesized. Microemulsion polymerization of Py‐Br in water/oil microemulsions produced poly(N‐(4‐butyl‐(1‐methylimidazole)) pyrrole bromide) (PPy‐Br) nanoparticles. The bromide anion of the resultant PPy‐Br nanoparticles was exchanged in water with different anions, including BF and PF to produce new nanoparticles bearing different counteranions. The results of thermal analysis indicate that the thermal stability of cationic PPy nanoparticles strongly depends on the nature of counteranion. As an application, water‐soluble PPy‐Br with fine fluorescence property was used as a new sensor for DNA detection. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 746–753, 2009     

渗透汽化分离苯—乙醇混合物

以甲基硅橡胶及甲基丙烯酸十二酯－甲基丙烯酸异丁酯的共聚物共为膜材料，以聚丙烯睛多孔膜为底膜制成复合膜，对苯－乙醇混合物进行渗透汽化分离。考察了膜材料的组成、分离温度、原料液组分等因素对膜性能的影响。