How does huperzine A enter and leave the binding gorge of acetylcholinesterase? Steered molecular dynamics simulations

The entering and leaving processes of Huperzine A (HupA) binding with the long active-site gorge of Torpedo californica acetylcholinesterase (TcAChE) have been investigated by using steered molecular dynamics simulations. The analysis of the force required along the pathway shows that it is easier for HupA to bind to the active site of AChE than to disassociate from it, which for the first time interprets at the atomic level the previous experimental result that unbinding process of HupA is much slower than its binding process to AChE. The direct hydrogen bonds, water bridges, and hydrophobic interactions were analyzed during two steered molecular dynamics (SMD) simulations. Break of the direct hydrogen bond needs a great pulling force. The steric hindrance of bottleneck might be the most important factor to produce the maximal rupture force for HupA to leave the binding site but it has a little effect on the binding process of HupA with AChE. Residue Asp72 forms a lot of water bridges with HupA leaving and entering the AChE binding gorge, acting as a clamp to take out HupA from or put HupA into the active site. The flip of the peptide bond between Gly117 and Gly118 has been detected during both the conventional MD and SMD simulations. The simulation results indicate that this flip phenomenon could be an intrinsic property of AChE and the Gly117-Gly118 peptide bond in both HupA bound and unbound AChE structures tends to adopt the native enzyme structure. At last, in a vacuum the rupture force is increased up to 1500 pN while in water solution the greatest rupture force is about 800 pN, which means water molecules in the binding gorge act as lubricant to facilitate HupA entering or leaving the binding gorge.     

Storage-Reduction of NOx over Combined Catalysts of Pt/Ba/Al2O3-Mn/Ba/Al2O3： Carbon Monoxide as Reductant

Storage-reduction of NOx by carbon monoxide was investigated over combined catalysts of Mn/Ba/Al2O3-Pt/Ba/Al2O3. Combination of Mn/Ba/Al2O3 and Pt/Ba/Al2O3 catalysts in different ways showed excellent NOx storage-reduction performance and the content of Pt could be reduced by 50%. Not only the addition of 5Mn/15Ba/Al2O3 to lPt/15Ba/Al2O3 could improve its storage ability, but also enhance the NOx conversion consequently. NOx conversion over the combined catalysts (the combined catalysts I and II) was increased under dynamic lean-rich burn conditions, the maximum NOx conversion increased from 69.4% to respectively 78.8% and 75.7% over two combined catalysts.     

氧化-还原低温引发甲基丙烯酸甲酯/丙烯酸丁酯超浓乳液聚合研究

以乳化剂十二烷基硫酸钠 (SDS)和共乳化剂十六烷醇 (HD)作为复合乳化体系 ,过氧化二苯甲酰(BPO)和N ,N 二甲基苯胺 (DMA)作为氧化还原引发体系 ,甲基丙烯酸甲酯 丙烯酸丁酯 (MMA BA)作为混合单体 ,制备了分散相占 83 %以上的稳定的超浓乳液 ,然后在低温下引发聚合 .探讨了引发剂浓度、氧化剂与还原剂的摩尔比、乳化剂的浓度、液膜增强剂的种类、聚合温度等因素对聚合稳定性和聚合速率的影响 ,测定并计算得到了聚合速率的公式 ;用激光散射粒度分布仪测定了聚合物乳胶粒子的大小及粒径分布 ,用透射电子显微镜观察了聚合物乳胶粒的形态 ,讨论了乳化剂浓度、聚合温度等对乳胶粒形态、大小的影响     

以对-(4-烯丙氧基苯甲酰氧基)苯甲酸对-甲氧基苯酚酯为单体的液晶聚硅氧烷的合成与表征

侧链型液晶聚合物是目前很有兴趣的研究课题之一。在国内,有关的研究报道也逐渐增多,本工作设计并合成了对-(4-烯丙氧基苯甲酰氧基)苯甲酸对-甲氧基苯酚酯单体,其结构式为:     

Preparative SEC column packed with microporous particles prepared from cellulose

New microporous particles with large pore size (mean pore diameter of 820 nm) are successfully prepared from a mixture of cellulose and konjac glucomannan (RC-KGM3) in 1.5 M NaOH-0.65 M thiourea aqueous solution by coagulating with 5 weight percentage (wt%) CaCl(2), and then 2 wt% HCl aqueous solution. A preparative size-exclusion chromatographic (SEC) column packed with the gel particles is used for the fractionation of a dextran in water. The exclusion limit and fractionation range of the stationary phase are molecular masses of 125 yen 104 g/mol and 5.6 yen 104 to 125 yen 104 g/mol, respectively. The dextran [dextran 50, weight-average molecular mass (M(w)) = 40.1 yen 104 g/mol, polydispersity index (d) = 3.5] is fractionated by the preparative SEC column to obtain six fractions, and four of them are refractionated twice by the same preparative SEC column. The refractionated samples F-3-3 and F-4-3 are characterized by analytical SEC combined with laser light scattering and light scattering to obtain M(w) of 91.8 and 61.9 yen 104 g/mol, as well as d of 1.3 and 1.4, respectively. The results indicate that the fractions having narrow molecular mass distribution are satisfactorily prepared with the SEC column. The described SEC column can be successfully used to fractionate polymers in aqueous solution.     

Mass spectrometry-based chemical mapping and profiling toward molecular understanding of diseases in precision medicine

Precision medicine has been strongly promoted in recent years. It is used in clinical management for classifying diseases at the molecular level and for selecting the most appropriate drugs or treatments to maximize efficacy and minimize adverse effects. In precision medicine, an in-depth molecular understanding of diseases is of great importance. Therefore, in the last few years, much attention has been given to translating data generated at the molecular level into clinically relevant information. However, current developments in this field lack orderly implementation. For example, high-quality chemical research is not well integrated into clinical practice, especially in the early phase, leading to a lack of understanding in the clinic of the chemistry underlying diseases. In recent years, mass spectrometry (MS) has enabled significant innovations and advances in chemical research. As reported, this technique has shown promise in chemical mapping and profiling for answering “what”, “where”, “how many” and “whose” chemicals underlie the clinical phenotypes, which are assessed by biochemical profiling, MS imaging, molecular targeting and probing, biomarker grading disease classification, etc. These features can potentially enhance the precision of disease diagnosis, monitoring and treatment and thus further transform medicine. For instance, comprehensive MS-based biochemical profiling of ovarian tumors was performed, and the results revealed a number of molecular insights into the pathways and processes that drive ovarian cancer biology and the ways that these pathways are altered in correspondence with clinical phenotypes. Another study demonstrated that quantitative biomarker mapping can be predictive of responses to immunotherapy and of survival in the supposedly homogeneous group of breast cancer patients, allowing for stratification of patients. In this context, our article attempts to provide an overview of MS-based chemical mapping and profiling, and a perspective on their clinical utility to improve the molecular understanding of diseases for advancing precision medicine.

An overview of MS-based chemical mapping and profiling, indicating its contributions to the molecular understanding of diseases in precision medicine by answering "what", "where", "how many" and "whose” chemicals underlying clinical phenotypes.     

氟化钾负载改性法制备碱性NaY沸石

氟化钾（ＫＦ）可以高度分散于八面沸石表面，通过与ＮａＹ沸石表面发生相互作用产生ＫＯＨ类碱物种，使ＫＦ／ＮａＹ具有类似于ＫＯＨ／ＮａＹ的碱性，在异丙醇探针反应的碱性催化活性也与ＫＯＨ／ＮａＹ相似，由于沸石中的Ｓｉ组分容易与ＫＯＨ生成强度低的碱性化合物，妨碍ＫＦ或ＫＯＨ负载过程中强碱位的生成，因此ＫＦ／ＮａＹ的碱强度介于ＫＦ／ＳｉＯ２和ＫＦ／γ－Ａｌ２Ｏ３之间。     

毛细管气相色谱法同时测定水产品中的多氯联苯和有机氯农药残留量

建立了毛细管气相色谱法同时测定水产品中多氯联苯和有机氯农药的方法，用高氯酸与冰乙酸的混合溶液消化样品，以石油醚提取，浓硫酸净化后，用毛细管气相色谱法测定，方法的回收法为88％－110％，相对标准偏差为8％－19％（n=6)，检出限为0．08－0．60ug/kg，方法简便，快速，结果准确。     

毛细管电泳-单链构象多态性分析检测K-ras基因突变

K ras癌基因的点突变在结直肠癌的发生起重要作用。以异丙醇为聚合反应链转移剂,水相法合成 特性粘度为0.70×10-3m3/kg,分子量为6.5×104的低粘度短链线性聚丙烯酰胺。以6%线性聚丙烯酰胺为 筛分介质,分离温度27℃,分离电压9kV为电泳条件,建立了检测K ras基因突变的毛细管电泳 单链构象多 态性方法。利用该方法检测36例结直肠癌患者肿瘤组织,发现12例K ras基因突变。结果表明:该方法具有 快速、高灵敏的优点,为大规模进行结直肠肿瘤的早期诊断提供了可靠方法。     

镉（Ⅱ）—4—甲醛基重氮氨基偶氮苯显色反应的研究

本文研究了Cd(Ⅱ)与4-甲醛基重氮氨基偶氮苯的显色反应。试验结果表明:在TritonX-100的存在下,pH9.50的Na_2B_4O_7-NaOH缓冲体系中,显色反应的灵敏度高,络合物的最大吸收峰在525nm处,表观摩尔吸光系数为1.33×10~5L·mol~(-1)·cm~(-1),Cd(Ⅱ)浓度在0～10μg/25ml范围内符合比耳定律。利用阴离子交换树脂(717)小柱分离干扰离子后,测定地质试样中微量镉,结果满意。