An efficient synthesis of α-aryl β-(N-tosyl)amino phosphonate derivatives from α-diazophosphonate

The α-diazophosphonate was added to aryl (N-tosyl)imine to give β-aryl β-(N-tosyl)amino α-diazophosphonates, which were further subjected to TsOH-catalyzed diazo decomposition to yield α-aryl β-(N-tosyl)enaminophosphonates through 1,2 aryl migration. The α-aryl β-(N-tosyl)enamino phosphonates were hydrogenated to give α-aryl β-(N-tosyl)amino phosphonates.     

4-Aminobicyclo[2.2.2]octanone Derivatives with Antiprotozoal Activities

Summary.  4-Aminobicyclo[2.2.2]octanones which were prepared in one-pot-reactions from benzylidene acetone and dialkylammonium rhodanides were reduced stereoselectively to their corresponding alcohols. The activities of the bicyclic compounds against causative organisms of tropical deseases were examined. The 4-aminobicyclo[2.2.2]octan-2-ols were in general more active against Trypanosoma b. rhodesiense and Plasmodium falciparum than the corresponding keto compounds. Corresponding author. E-mail: robert.weis@uni-graz.at Received November 27, 2002; accepted December 2, 2002 Published online May 2, 2003     

Electrochromic properties of WO<Subscript>3</Subscript> and WO<Subscript>3</Subscript>:P thin films

WO₃ and WO₃:P (5 mol% H₃PO₄) thin films were prepared using the sol-gel route and the electrochromic properties of the films were investigated using in situ spectroelectrochemical methods. The measurements were performed in propylene carbonate solution with 0.1 M LiClO₄ as electrolyte. During the cathodic polarization at –0.8 V a blue coloration is observed with a reversible variation between 14% and 84% of the transmittance at λ=633 nm. The kinetics for the bleaching process is faster for the WO₃:P film than for the undoped WO₃ film. Electronic Publication     

Sm2O3对CuO-γ-Al2O3催化剂性能的影响

在色谱微反流动法实验装置上考察了负载Ｓｍ２Ｏ３对ＣｕＯγＡｌ２Ｏ３催化剂ＣＯ氧化活性的影响，并运用Ｘ射线衍射（ＸＲＤ）、程序升温还原（ＴＰＲ）及程序升温脱附（ＴＰＤＭＳ）技术研究了Ｓｍ２Ｏ３对ＣｕＯγＡｌ２Ｏ３催化剂的物相结构、氧化还原特性及表面氧的脱附与恢复行为的影响。结果表明，负载适量的Ｓｍ２Ｏ３对ＣｕＯγＡｌ２Ｏ３催化剂表面氧的脱出与恢复有促进作用，可使部分γＡｌ２Ｏ３相变成γＡｌ２Ｏ３和θＡｌ２Ｏ３的混合型。负载适量的Ｓｍ２Ｏ３能改善催化活性，而负载过量的Ｓｍ２Ｏ３则使ＣｕＯ催化剂上ＣｕＯ的晶粒增大，从而对催化活性起了抑制作用。     

粘度法预测聚乙二醇/壳聚糖体系的相容性

甲壳素在自然界的含量很大，仅次于纤维素，是一种颇具应用潜力的天然高分子．可由甲壳素经脱酸基化制得壳聚糖．由于其分子中存在氨基，因此能溶解干酸性水溶液中，并以聚电解质的形式存在，近来用壳聚糖制得的纤维膜应用于药物、食品等的分离和纯化、污水的处理，分离效果好，且不带入任何化学杂质．在壳聚糖纤维膜制作及与纤维的混纺过程中，都要探讨它与其它相应高聚物的相容性[1]．我们以相容的壳聚糖（chitosan）／聚乙二醇（PEG）体系为例，采用粘度法讨论其分子间的相互作用，并预测它们的相容性．壳聚糖的基本结构为1实验部分1.1…     

Metal Nanoparticles on Stainless Steel Surfaces as Novel Heterogeneous Catalysts

The goal of this work was the development of a novel type of heterogeneous catalyst, consisting of bare metal nanoparticles on stainless steel foils, which can be shaped to any kind of architecture and, if necessary, heated electrically. Solutions of pre-prepared, ligand protected and monodispersed gold, palladium, platinum and rhodium nanoparticles were sprayed onto stainless steel foils, followed by the careful removal of the ligand molecules by an oxygen plasma treatment. Due to this, bare particles become irreversibly fixed on the steel support. It could be shown that the original particle sizes do not change during the plasma treatment. Foils, densely coated with the nanoparticles, were used for gas phase catalyses in a self-made reactor at room temperature or at 60 °C. Hydrogenation of 1,3-butadiene at 15 nm Pd and 2 nm Pt, CO oxidation at 16 nm, 8 nm and 1.4 nm gold and NO reduction with NH₃ at 2 nm Rh particles were performed, indicating that the novel catalysts might in principle be applicable in technical processes if the experimental conditions like form and temperature would be optimized. Dedicated to Professor Dieter Fenske on the occassion of his 65th birthday.     

Chemical constituents from the roots of <Emphasis Type="Italic">Polygonum bistorta</Emphasis>

Investigation of the roots of Polygonum bistorta L. afforded seven compounds including five triterpenoids, a coumarin, and a steroid, the structures of which were identified by EIMS, ¹H NMR, ¹³C NMR, DEPT, and HMBC experiments. All the compounds have been isolated from Polygonum genus for the first time. Published in Khimiya Prirodnykh Soedinenii, No. 5, pp. 463–465, September–October, 2007.     

Synthesis and characterization of cobalt(II), nickel(II), copper(II), palladium(II) and dioxouranium(VI) complexes of the antipyrine Schiff base of 3-formylsalicylic acid

A new Schiff base has been synthesized from 4-aminoantipyrine and 3-formylsalicylic acid. The ligand has a dianionic tetradentate compartmental OONO donor system. The cobalt(II), nickel(II), copper(II) and dioxouranium(VI) complexes exist in phenolato-bridged dinuclear species, while palladium(II) gives a mononuclear complex with free –COOH groups. The complexes have been characterized by elemental analyses, i.r., u.v.-vis, thermal and magnetic measurements.     

Carboxylic Acids from <Emphasis Type="Italic">Phyllanthus urinaria</Emphasis>

Five compounds, terephthalic acid mono-[2-(4-carboxy-phenoxycarbonyl)-vinyl] ester (1), (E)-3-(5′-hydroperoxy-2,2′-dihydroxy[1,1′-biphenyl]-4-yl)-2-propenoic acid (2), 3,4,5-trihydroxybenzoic acid (3), succinic acid (or butanedioic acid) (4), and 2,3,4,5,6-pentahydroxybenzoic acid (5), were isolated from Phyllanthus urinaria. The structures of these compounds were elucidated by means of spectral techniques including IR, MS, and 1D/2D NMR. 1 and 2 are new compounds.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 14–17, January–February, 2005.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.