硅氧烷乳液聚合过程中大颗粒形成机理研究：Ⅰ.阳离子型乳液的耐电解质…

探讨了二甲基聚硅氧烷阳离子型乳液耐电解质稳定性的影响因素。结果表明，加入少量的非离子型表面活性剂与阳离子型乳化剂并用进行乳液聚合，可以保护乳液粒子，防止由于电解质引的乳液粒子的相互凝聚而形成大颗粒。     

2-(5-溴-2-吡啶偶氮)-5-二乙氨基酚-BrO_3~--SCN-三元离子缔合物测定微量BrO_3~-的研究

本文研究了5-Br-PADAP在酸性介质中质子化,与BrO_3~-和SCN~-形成三元离子缔合物的最佳条件,其表观摩尔吸光系数ε_(540)=4.3×10~4L·mol~(-1)·cm~(-1),缔合物组成比为:5-Br-PADAP:BrO_(3-)SCN~-=1:1·1。提供了测定微量BrO_(3-)的新方法,可应用于化学试剂中微量BrO~(3-)的测定。此外,本文还探讨了反应机理。     

The effect of triethylenetetraamine (Trien) on the ion flotation of Cu(2+) and Ni(2+)

Ion flotation is a separation process involving the adsorption of a surfactant and counterions at an air/aqueous solution interface. It shows promise for removing toxic heavy metal ions from dilute aqueous solutions. Here we report the effect of a neutral chelating ligand, triethylenetetraamine (Trien), on the ion flotation of cations with dodecylsulfate, DS(-), introduced as sodium dodecylsulfate, SDS. Ion flotation in the aqueous SD-Cu(II)-Ca(II)-Trien system gave strongly preferential removal of Cu(II) over Ca(II), which is a reversal of the order of selectivity seen in the SDS-Cu(II)-Ca(II) system containing no Trien. The removal rates of Cu(2+) and Ni(2+) with DS(-) were much faster in the presence of Trien than for simple aquo ions, and the final metal concentration was significantly lower. Surface tension measurements showed that Trien enhanced the surface activity and adsorption density for SDS-Cu(II) and SDS-Ni(II) solutions. The overall change in the Gibbs free energy for adsorption resulting from complexation was -3.60 kJ/mol for Cu(II) and -3.50 kJ/mol for Ni(II). This included the effects of hydrophobic interactions between the metal-Trien complexes at the air/solution interface, along with changes in the amount of dehydration associated with cosorption of the metal-Trien complex with DS(-) at the air/solution interface.     

Modern microscopy methods for the structural study of porous materials

This article describes a number of important recent microscopy tools and their application in particular to the study of porous inorganic materials. The authors believe that these new techniques are on the threshold of delivering enormous new power in the chemist's arsenal for understanding new and complex behaviour in multi-component, hierarchical or composite materials. In particular we consider the contribution of electron crystallography, three-dimensional electron tomography, ultra-high resolution scanning electron microscopy as well as the combined application of high-resolution electron microscopy and atomic force microscopy to the study of surfaces and crystal growth. Much of this work has taken on a particular significance owing to the ground breaking work of scientists at Mobil and in Japan 10 years ago in the successful synthesis of materials with porosity on many length scales achieved through the cooperative self-assembly between inorganic and organic phases. This resulted in a series of materials known as M41S of which MCM-41 and MCM-48 were two of the first and most important structures to be synthesised. This has led to a wealth of new porous structures with order over many length scales and has presented new problems in characterisation. Microscopy methods properly executed are particularly important in the study of this new class of material.     

含超价硫三元无机杂环化合物的理论研究(Ⅰ)

本文应用ab initio方法,研究了含超价硫化合物分子中硫原子的3d轨道的成键作用,并使用Martagh-Sargent梯度优化法,预测了该化合物的几何构型。指出硫二氮三元无机杂环中,d-pπ键在S-N间起重要作用。     

Development of a novel potentiometric titration method for determination of polypropylene degradation

In this study, a novel potentiometric titration of hydroperoxide in degraded polypropylene (PP) is proposed. This titration is quite sensitive compared with the conventional ones such as UV and manual titrations, and its detection limit was about 2 meq/kg. The sensitivity was equal to that of molecular weight measurement by GPC for the degraded PP and, in addition, the volatilization behavior of the hydroperoxide could be detected. This titration was found to be very effective for the determination of PP degradation.     

Highly selective two-photon chemosensors for fluoride derived from organic boranes

[reaction: see text] Three organoboron compounds are shown to be two-photon fluorescent sensors for fluoride anion with high sensitivity and selectivity. The recognition mechanism is attributed to the unique steric structure of the bulky dimesitylboryl group and the Lewis acid-base interaction between trivalent boron atom and fluoride anion.     

铅中毒——消化系统的表现

分析了铅中毒引起的消化系统改变及临床特点。     

H2/CO2 separations in multicomponent metal-adeninate MOFs with multiple chemically distinct pore environments

Metal–organic frameworks constructed from multiple (≥3) components often exhibit dramatically increased structural complexity compared to their 2 component (1 metal, 1 linker) counterparts, such as multiple chemically unique pore environments and a plurality of diverse molecular diffusion pathways. This inherent complexity can be advantageous for gas separation applications. Here, we report two isoreticular multicomponent MOFs, bMOF-200 (4 components; Cu, Zn, adeninate, pyrazolate) and bMOF-201 (3 components; Zn, adeninate, pyrazolate). We describe their structures, which contain 3 unique interconnected pore environments, and we use Kohn–Sham density functional theory (DFT) along with the climbing image nudged elastic band (CI-NEB) method to predict potential H₂/CO₂ separation ability of bMOF-200. We examine the H₂/CO₂ separation performance using both column breakthrough and membrane permeation studies. bMOF-200 membranes exhibit a H₂/CO₂ separation factor of 7.9. The pore space of bMOF-201 is significantly different than bMOF-200, and one molecular diffusion pathway is occluded by coordinating charge-balancing formate and acetate anions. A consequence of this structural difference is reduced permeability to both H₂ and CO₂ and a significantly improved H₂/CO₂ separation factor of 22.2 compared to bMOF-200, which makes bMOF-201 membranes competitive with some of the best performing MOF membranes in terms of H₂/CO₂ separations.

Tailorable multicomponent MOFs and MOF membranes for efficient H₂/CO₂ separation.