基于5-芳基乙内酰脲类化合物的CoMFA和HQSAR研究

用CoMFA和HQSAR两种QSAR方法研究了50个乙内酰脲类分子的定量构效关系.本研究从构象搜索所得的低能结构出发构建化合物分子的构象, 建立CoMFA模型,并进行了全空间搜索. HQSAR本质上是一种二维的QSAR方法,与CoMFA方法相比,该方法在数据处理方面,比CoMFA方法快捷,并且可重复性好.两种方法均得到了较好分析结果, CoMFA的交叉验证相关系数q2 值为0.815, HQSAR的q2值为0.893.这些方程有力地说明了该类分子在(R,R)-N-3,5-dinitrobenzoyl-1,2-diamine型手性固定相上拆分过程中的影响因素,对今后类似拆分的实验研究提供了理论支持.     

铂配位的腺嘌呤质子化的理论研究

用量子化学从头算研究一系列平面四方金属配体作用于腺嘌呤N₇位点对其质子化的影响。计算结果表明气相中，配合物质子化能力主要受长程静电效应影响，不同金属离子的影响差别甚微。综合考虑极性溶剂影响后长程静电效应影响显著降低。NBO电荷布居分析表明质子化位点电子云密度的变化直接影响该位点质子化能力。     

Ti基IrO2＋Ta2O5阳极在H2SO4溶液中的电解时效行为

研究了450 ℃制备所得Ti/70％IrO2 30％Ta2O5（摩尔分数）高寿命阳极在H2SO4溶液电解过程中电极的物理、化学及电化学性能的时效行为.结果发现，整个电解过程可分为“活化”、“稳定”及“失效”三个阶段.在“活化”及“稳定”区内主要发生电极表面活性氧化物的溶解，涂层中IrO2金红石相的（110）、（101）晶面择优取向随电解时间延长而减弱，而（002）晶面择优增强.但是在“失效区”内，各晶面的择优程度却不随电解时间的变化而变化，这表明在“失效区”内氧化物的损失机制发生了变化.电化学阻抗谱测试表明，电极的析氧电化学反应电阻随电解时间的延长发生缓慢而连续的上升，而整个电极的物理阻抗在“失效区”内却发生突升现象.X射线衍射分析（XRD）表明，随电解时间的延长TiO2金红石相的衍射强度增大，达“失效区”时衍射强度发生突升.根据实验现象特别是“失效区”内阳极的时效行为提出高寿命Ti基氧化物涂层阳极的失效机制.     

氯磺化聚乙烯的γ—辐射交联

氯磺化聚乙烯(简称CSM)由于存在SO_2Cl基团很容易通过金属氧化物进行化学交联,但至今未见其辐射交联的详细报道.本文探讨氯含量对CSM辐射交联的影响. 所用CSM系吉林化工公司产品:20型(含氯量29～33％,下同),40型(33～37％)和30型(40～45％).将CSM和防老D按一定比例混炼均匀,再在140℃左右热压成形.试样用3.33×10~(15)Bg ~(60)Co于室温限量空气下进行辐照.辐照过的试样于80℃处理2小时以消除俘陷自由基.在氮气保护下先后用二甲苯和无水乙醇,加热回流48小时和8小时,测定凝胶含量.     

Surface plasmon resonances of silver triangle nanoplates: graphic assignments of resonance modes and linear fittings of resonance peaks

The extinction spectra of five silver equilateral triangle plates with a fixed thickness of 10 nm and side lengths of 50, 100, 150, 200 ,and 250 nm, respectively, have been simulated by the discrete dipole approximation (DDA) method in which a geometric object of interest is meshed and represented by a lattice of spatial dipoles. Irradiated by an incident plane wave with a given propagation direction and polarization state, each triangle nanoplate presents three surface plasmon resonance (SPR) peaks in the range of 300 to 1200 nm. At a given peak, every complex spatial oscillatory vector derived by DDA (corresponding to a certain dipole in the meshed target) is orthogonally resolved into three basic oscillations. Each basic component can be subsequently expressed by two parameters, amplitude (P) and phase angle (varphi). The distributions of six such physical parameters of all the dipoles in the selected cross plane of the target are illustrated colorfully in plots as a graphic characterization and assignment of the SPR modes. The graphic method is applied to reveal the local fine features of SPR modes. And it provides direct evidence for classifying SPR peaks which belong to different triangle nanoplates and appear at different wavelengths. Three SPR modes are recognized graphically and the wavelengths of SPR peaks are found to have linear relationships with the side lengths of the triangle nanoplates.     

Determination of phenolic compounds using high-performance liquid chromatography with Ce-Tween 20 chemiluminescence detection

A novel method for the simultaneous determination of phenolic compounds such as salicylic acid, resorcinol, phloroglucinol, p-hydroxybenzoic acid, 2,4-dihydroxybenzoic acid, and m-nitrophenol by high-performance liquid chromatography (HPLC) coupled with chemiluminescence (CL) detection was developed. The procedure was based on the chemiluminescent enhancement by phenolic compounds of the cerium(IV)-Tween 20 system in a sulfuric acid medium. The separation was carried out with an isocratic elution or with a gradient elution using a mixture of methanol and 1.5% acetic acid. For six phenolic compounds, the detection limits (3σ) were in the range 1.40-5.02 ng/ml and the relative standard deviations (n=11) for the determination of 0.1 μg/ml compounds were in the range 1.9-2.9%. The CL reaction was well compatible with the mobile phase of HPLC, no baseline drift often occurred in HPLC-CL detection was observed with a gradient elution. The method has been successfully applied to the determination of salicylic acid and resorcinol in Dermatitis Clear Tincture and p-hydroxybenzoic acid in apple juices.     

Effects of EG and MoSi2 on thermal degradation of intumescent coating

An intumescent flame retardant coating was prepared with resin, solvent and flame retardant system composed of ammonium polyphosphate-APP, pentaerythritol-PER and melamine-MEL. The modifiers such as molybdenum disilicide (MoSi₂) and expandable graphite (EG) were used to improve the performances of the APP-PER-MEL coating. The effects of EG, MoSi₂ and MoSi₂/EG on the fireproofing time and char formation of the coating were investigated by using heat insulation test, thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electric microscope (SEM). The results showed that by adding modifiers, the fireproofing time was prolonged and char formation rate was evidently enhanced. The largest improvement was achieved with 9 wt.% MoSi₂/5 wt.% EG, XPS analysis indicated that the performance of anti-oxidation of the coating was improved by adding EG and MoSi₂, and SEM images showed that a good synergistic effect was obtained through a ceramic-like layer produced by MoSi₂ covered on the surface of “open-cellular” structural char.     

Synthesis and Structure of 2‐Substituted Thieno[3′,2′:5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐one Derivatives

A series of new 2‐substituted 3‐(4‐chlorophenyl)‐5,8,9‐trimethylthieno[3′,2′: 5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐ones 8 were synthesized via an aza‐Wittig reaction. Phosphoranylideneamino derivatives 6a or 6b reacted with 4‐chlorophenyl isocyanate to give carbodiimide derivatives 7a or 7b , respectively, which were further treated with amines or phenols to give compounds 8 in the presence of a catalytic amount of EtONa or K₂CO₃. The structure of 2‐(4‐chlorophenoxy)‐3‐(4‐chlorophenyl)‐5,8,9‐trimethylthieno[3′,2′: 5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐one ( 8j ) was comfirmed by X‐ray analysis.     

Fast surface immobilization of native proteins through catalyst-free amino-yne click bioconjugation

Surface immobilization provides a useful platform for biosensing, drug screening, tissue engineering and other chemical and biological applications. However, some of the used reactions are inefficient and/or complicated, limiting their applications in immobilization. Herein, we use a spontaneous and catalyst-free amino-yne click bioconjugation to generate activated ethynyl group functionalized surfaces for fast immobilization of native proteins and cells. Biomolecules, such as bovine serum albumin (BSA), human IgG and a peptide of C(RGDfK), could be covalently immobilized on the surfaces in as short as 30 min. Notably, the bioactivity of the anchored biomolecules remains intact, which is verified by efficiently capturing target antibodies and cells from the bulk solutions. This strategy represents an alternative for highly efficient surface biofunctionalization.

Fast surface immobilization of native bioconjugates through a spontaneous amino-yne click reaction is realized.