提高微晶硅薄膜太阳电池效率的研究

采用甚高频等离子体增强化学气相沉积技术制备了系列微晶硅薄膜太阳电池，指出了气体总流量和背反射电极的类型对电池性能参数的影响.电池的I-V测试结果表明：随反应气体总流量的增加，对应电池的短路电流密度、开路电压和填充因子都有很大程度的提高，结果使得电池的光电转换效率得以提高.另外，ZnO/Ag/Al背反射电极能明显提高电池的短路电流密度，进而也提高了电池的光电转换效率.对气体总流量和背反射电极类型影响电池效率的原因进行了分析. 关键词： 微晶硅薄膜太阳电池 气体流量 ZnO/Ag/Al背反射电极     

T-型树谱唯一性的一个简单刻画

图G称为谱唯一的,如果任何与G谱相同的图一定与G同构.一棵树称为T-型树如果其仅有一个最大度为3的顶点.本文给出了T-型树谱唯一性的一个简单刻画,从而完全解决了T-型树的谱唯一性问题.     

直径对脉冲爆震发动机性能的影响

本文通过实验研究了脉冲爆震发动机的直径对其性能的影响．实验结果表明；当爆震室的直径增大时，爆震波压力波形相似，平均峰值压力比较接近，且比冲基本保持不变，而推力则随爆震室直径的增大而增大。实验曲线表明爆震室内的流动具有自相似性，从而为建立尺寸律提供了实验依据．本文中比冲和平均推力是利用摆动原理测量的，并与由作用在推力壁上的压力计算得出的比冲和平均推力的理论值和实验值进行了比较，结果基本吻合，说明该测量方法可行．     

The application of a vehicle routing model to a waste-collection problem: two case studies

In this paper we suggest a unique model for estimating the operating cost of each of three waste-collection systems. Under the traditional system, which is widely used, waste is typically collected in plastic bags and a three-man crew is needed on each vehicle. The other two systems require a one-man crew for vehicle collecting street containers. The side-loader system with fixed body automatically empties street containers into the vehicle body and empties the load at the disposal site. The side-loader system with demountable body allows the separation of the waste collection phase from transport to the disposal site, since the vehicle body can be demounted. We also present two case studies and show how the estimation of operating costs is a critical issue in decisions regarding the type of system to be used for waste collection.     

The study and applications of photochemical-dynamical gravity wave model II

A nonlinear, compressible, non-isothermal gravity wave model that involves photochemistry is used to study the effects of gravity wave on atmospheric chemical species distributions in this paper. The changes in the distributions of oxygen compound and hydrogen compound density induced by gravity wave propagation are simulated. The results indicate that when a gravity wave propagates through a mesopause region, even if it does not break, it can influence the background distributions of chemical species. The effect of gravity wave on chemical species at night is larger than in daytime.     

机翼大攻角下失速颤振的气动弹性研究

本文采用流固耦合的数值方法研究了机翼在0°～50°攻角下的颤振。计算结果表明,随着来流攻角α0的增大,机翼的固有频率对颤振的影响越来越大,颤振由线性的强迫振动逐渐发展成为非线性的自激振动,而当α0增加到一定程度以后,大尺度分离流交替地从机翼头部和尾部产生,机翼和流场会发生共振,引起机翼的失速颤振。     

增湿活化反应器内喷水脱硫试验研究

本文介绍在热态脱硫试验台上进行的生石灰和消石灰的喷水活化脱硫试验,研究了Ca/S比、饱和温距、入口烟气SO2浓度、烟气速度及水喷嘴雾化风对脱硫效率和钙利用率的影响规律,对两种脱硫剂的脱硫活性进行了比较,并对喷水增湿提高脱硫效率的机理进行了分析。研究表明,喷水增湿使两种脱硫剂的活性都有明显提高,生石灰具有价格优势。     

Polyhedral <Emphasis Type="Italic">K</Emphasis><Subscript><Emphasis Type="Italic">2</Emphasis></Subscript>

 Using elementary graded automorphisms of polytopal algebras (essentially the coordinate rings of projective toric varieties) polyhedral versions of the group of elementary matrices and the Steinberg and Milnor groups are defined. They coincide with the usual K-theoretic groups in the special case when the polytope is a unit simplex and can be thought of as compact/polytopal substitutes for the tame automorphism groups of polynomial algebras. Relative to the classical case, many new aspects have to be taken into account. We describe these groups explicitly when the underlying polytope is 2-dimensional. Already this low-dimensional case provides interesting classes of groups. Received: 13 December 2001 / Revised version: 24 June 2002 The second author was supported by the Deutsche Forschungsgemeinschaft, INTAS grant 99-00817 and TMR grant ERB FMRX CT-97-0107 Mathematics Subject Classification (2000): 14L27, 14M25, 19C09, 52B20     

Singularity conjecture and constructions of Jacobi forms

This paper verifies the singularity conjecture for Jacobi forms with higher degree in some typical cases, and gives constructions for the Jacobi cusp forms whose Fourier coefficients can be expressed by some kind of Rankin-typeL-series.     

基于MATLAB(SIMULINK)的电弧炉电极调节系统FUZZY-PD控制器的仿真

介绍了采用MATLAB V5.2提供的模糊逻辑工具箱来设计研究电孤纺电极调节系统中的模糊－－PD控制器，讨论了在SIMULINK环境下模糊－PD控制器的参数自调速原理、结构、建立模糊控制规则库和模糊推论方法，并给出仿真结果与结论。