Conversion of natural gas to C2 hydrocarbons via cold plasma technology

The plasma technology served as a tool in unconventional catalysis has been used in natural gas conversion, because the traditional catalytic methane oxidative coupling reaction must be performed at high temperature on account of the stability of methane molecule. The focus of this research is to develop a process of converting methane to C2 hydrocarbons with non-equilibrium plasma technology at room temperature and atmospheric pressure. It was found that methane conversion increased and the selectivity of C2 hydrocarbons decreased with the voltage. The optimum input voltage range was 40-80 V corresponding to high yield of C2 hydrocarbons. Methane conversion decreased and the selectivity of C2 hydrocarbons increased with the inlet flow rate of methane. The proper methane flow rate was 20-40 ml/min (corresponding residence time 10-20 s). The experimental results show that methane conversion was 47% and the selectivity of C2 hydrocarbons was 40% under the proper condition using atmospheric DBD cold plasma technology. It was found that the breakdown voltage of methane VB was determined by the type of electrode and the discharge gap width in this glow discharge reactor. The breakdown voltage of methane VB,min derived from the Paschen law equation was established.     

Biodiesel Preparation from Jatropha curcas Oil Catalyzed by Hydrotalcite Loaded With K2CO3

This paper discusses the synthesis of biodiesel catalyzed by solid base of K₂CO₃/HT using Jatropha curcas oil as feedstock. Mg–Al hydrotalcite was prepared using co-precipitation methods, in which the molar ratio of Mg to Al was 3:1. After calcined at 600 °C for 3 h, the Mg–Al hydrotalcite and K₂CO₃ were grinded and mixed according to certain mass ratios, in which some water was added. The mixture was dried at 65 °C, and after that it was calcined at 600 °C for 3 h. Then, this Mg–Al hydrotalcite loaded with potassium carbonate was obtained and used as catalyst in the experiments. Analyses of XRD and SEM characterizations for catalyst showed the metal oxides formed in the process of calcination brought about excellent catalysis effect. In order to achieve the optimal technical reaction condition, five impact factors were also investigated in the experiments, which were mass ratio, molar ratio, reaction temperature, catalyst amount and reaction time. Under the best condition, the biodiesel yield could reach up to 96%.     

A novel immunosensor for carcinoembryonic antigen based on poly(diallyldimethylammonium chloride) protected prussian blue nanoparticles and double-layer nanometer-sized gold particles

A highly sensitive amperometric immunosensor has been developed for the detection of carcinoembryonic antigen (CEA). It is based on (a) Prussian Blue nanoparticles coated with poly(diallyldimethylammonium chloride) (P-PB) and (b) double-layer gold nanocrystals. The sensor was obtained by first electrodepositing porous gold nanocrystals on the glassy carbon electrode (GCE), and then by modifying the electrode with the coated P-PB. Subsequently, colloidal gold nanoparticles (nano-Au) were adsorbed onto the GCE by electrostatic interactions between the negatively charged nano-Au and the positively charged P-PB to immobilize CEA antibodies. Finally, bovine serum albumin was employed to block possible remaining active sites and to prevent the non-specific adsorption on the nano-Au. This immunosensor was characterized by cyclic voltammetry and scanning electron microscopy. The working range was adjusted to two concentration ranges, viz. from 0.5 to 10 ng.mL^?1, and from 10 to 120 ng.mL^?1 of CEA, with a detection limit of 0.2 ng.mL^?1 at three times the background noise.     

Simultaneous stacking of cationic and anionic compounds in single run capillary zone electrophoresis by two-end field amplified sample injection

In order to extend the application of field amplified sample injection (FASI) in high throughput analysis, a convenient and simple procedure, namely two-end field amplified sample injection (TE-FASI), was developed for the simultaneous stacking of cationic and anionic compounds in a single run capillary zone electrophoresis (CZE). Following the capillary-filling with a buffer of high conductivity, water plug was loaded into each end of the capillary; and two high-field strength zones were generated at both heads of the column when high voltage was applied. Therefore, under suppressed EOF cations and anions can be selectively FASI stacked at anode and cathode head, respectively. After separation, the stacked anions and cations are detected by a common detector placed in the center of the capillary. Under the optimized conditions, the limits of detection for the model cationic (matrine and oxymatrine) and anionic (5-sulfosalicylic acid) compounds were determined as 0.2, 0.2 and 0.06 ng/mL, respectively. Compared with non-stacking conditions, the sensitivities of these compounds were enhanced 1003-, 1330- and 1380-fold, respectively. The results of reproducibility, linearity and real sample analysis show that the proposed procedure is promising to be applied for the simultaneous quantification detection of trace cationic and anionic analytes.     

Theoretical study on the origin of enantioselectivity in the primary amine–Brønsted acid catalyzed epoxidation of cyclic enones

Computational studies to determine the origin of enantioselectivity in the (1R,2R)-1,2-diphenylethane-1,2-diamine (DEPN)–Brønsted acid catalyzed epoxidation of 2-cyclohexen-1-one have been performed using density functional theory. Transition states for conjugate addition and ring closure steps of the epoxidations catalyzed by three different catalyst systems were characterized. Our calculations show that the C_sp2H?O H-bond interaction between the benzene ring of the catalyst and H₂O is mainly responsible for the chiral discrimination observed. The Brønsted acid counterion plays a very important role in ensuring high enantioselectivity by improving the rigidity of the transition state structures to allow the efficient formation of the C_sp2H?O H-bond. Moreover, we explain why these two diamine catalysts (1S,2S)-DACH and (1R,2R)-DPEN display consistent enantioselectivities in the catalytic epoxidation of 2-cyclohexen-1-one when combining with three different cocatalysts; achiral TFA, and chiral (R)- and (S)-TRIP.     

Synthesis of a highly active amino‐functionalized Fe3O4@SiO2/APTS/Ru magnetic nanocomposite catalyst for hydrogenation reactions

An amino‐functionalized silica‐coated Fe₃O₄ nanocomposite (Fe₃O₄@SiO₂/APTS) was synthesized. The Fe₃O₄@SiO₂ microspheres possessed a well‐defined core–shell structure, uniform sizes and high magnetization. An immobilized ruthenium nanoparticle catalyst (Fe₃O₄@SiO₂/APTS/Ru) was obtained after coordination and reduction of Ru³⁺ on the Fe₃O₄@SiO₂/APTS nanocomposite. The Ru nanoparticles were not only ultra‐small with nearly monodisperse sizes but also had strong affinity with the surface of Fe₃O₄@SiO₂/APTS. The obtained catalyst exhibited excellent catalytic performance for the hydrogenation of a variety of aromatic nitro compounds, even at room temperature. Moreover, Fe₃O₄@SiO₂/APTS/Ru was easily recovered using a magnetic field and directly reused for at least five cycles without significant loss of its activity.     

Study of nano‐Cu/SiO2 catalysts for highly selective hydrogenation of acetophenone

Hydrogenation of acetophenone over nano‐Cu/SiO₂ catalysts was investigated. The catalysts, prepared by a liquid precipitation method using various precipitating agents, were characterized using low‐temperature nitrogen adsorption, X‐ray diffraction, temperature‐programmed desorption of ammonia, hydrogen temperature‐programmed reduction, transmission electron microscopy and X‐ray photoelectron spectroscopy. It was found that the catalysts prepared by a homogeneous precipitation method had better activity and stability than those prepared by a co‐precipitation method. The catalyst prepared using urea as precipitating agent had well‐dispersed copper species, high surface area and abundant pore structure. The catalytic performance and mechanism of the Cu/SiO₂ catalysts were further studied. It was found that the activity and stability of the catalysts could be improved by adjusting the proportion of Cu⁺/(Cu⁺ + Cu⁰). The sample prepared using urea as precipitating agent presented higher activity and selectivity. Also, the catalyst prepared using urea maintained a high catalytic performance while being continuously used for 150 h under the optimal reaction conditions.     

Study of the conjugation reaction between bovine serum albumin and gentamicin with Ponceau S as fluorescence probe

Abstract  

Ponceau S (PS) can quench the fluorescence of bovine serum albumin (BSA) in aqueous solution of pH 7.40. The static fluorescence-quenching process between BSA and PS was confirmed and the binding constant, the number of binding sites, and thermodynamic data for the interaction between BSA and PS were obtained. The results showed that the number of binding sites was 1 and that electrostatic attraction was important in the binding of BSA to PS. On the basis of the theory of F?rster resonance energy transfer, the binding distance (r < 7 nm) between PS and BSA was obtained. Site marker competitive experiments indicated that binding of PS to BSA primarily occurred in sub-domain IIA (site I). There was no obvious fluorescence intensity change on combining BSA and gentamicin (GM), so the conjugation reaction between BSA and GM cannot be studied by spectroscopy. It was observed that when GM was added to the BSA–PS system, the relative fluorescence intensity of the system recovered gradually with increasing concentration of GM, which showed there was a conjugation reaction between GM and BSA and that binding of GM to BSA primarily occurred in sub-domain IIA (site I).     

A Novel Fission Process in Mini-emulsion RAFT Polymerization: Shell Crosslinked Nanoparticles as a Model

Shell crosslinked nanoparticles, prepared from copolymerization of styrene and disulfide crosslinker, using poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) as stabilizer and macroinitiator, exhibited a special fission behavior during the mini-emulsion RAFT polymerization process.     

Formation of ti(28) ln cages, the highest nuclearity polyoxotitanates (ln=la, ce)

The solvothermal reactions of Ti(OEt)(4) with LnCl(3) (Ln=La, Ce) produced new Ti(28) Ln cages, in which the Ln(3+) ions are coordinated within a metallocrown arrangement, which represents the highest nuclearity cages of this type.