Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

一类系统构造问题的多输入-多输出基本方程与多目标优化

Renato Pennachi 讨论了以 S(M,N,C,λ_0)表示的参数系统抽象化定义,给出了参数系统的矩阵表示.Franz R.Pichler 总结 Salovara,Blomberg,Messarovic,Ma-cko,Windeknecht,Klir,Kalman,Zadeh 等人的工作,介绍了一般系统理论中若干以集合论与代数体系为基础的较有成效的动态系统建造与实现理论.G.M.Ostrovsky 等人在大规模复杂系统的优化问题中,运用了带有0—1变量的系数,研究了具有复杂平行序列的结构问题.     

Scientist up to the highest level

Dr. Miroslav Kyrš, DrSc. passed away prematurely and unexpectedly in August 2006 at age of 75. He was a leading person of the Czech radiochemistry during the second half of the 20th century and his results have of world-wide impact. His diligence, intelligence and permanent activity led him to be at first a laboratory chief and subsequently for about 25 years to be a chief of the Radiochemical Department of Czech Nuclear Research Institute (NRI) at Řež near Prague.     

在SQUID心磁测量中基于奇异值分解和自适应滤波的噪声消除法

采用矩阵奇异值分解(singular value decomposition, SVD)的方法，对高温射频超导量子干涉仪(HTc rf-SQUID)采集到的单通道心磁信号进行处理.证明了对于近似周期性的心磁信号，在无参考噪声的情况下矩阵奇异值分解的方法与自适应窄带陷波相结合有较好的消除广谱噪声的效果. 关键词： 高温射频超导量子干涉仪 心磁信号 奇异值分解 噪声消除     

几种陆用惯性自寻北方案的比较

介绍几种目前广泛应用于军事及民用工业领域的高精度自寻北方案,同时讨论并分析了这些方案的精度和误差补偿方法,提出在兵器领域尤其是在陆用车辆上的适用性等问题。     

An Economical Magnetocardiogram System Based on High-To SQUIDs

An economical magnetocardiogram （MCG） system is built in our laboratory. It mainly consists of a MCG data acquisition stage equipped with two high-To superconducting quantum interference device （SQUID） magnetometers, a data processing stage with digital filtering and a one-layer μ-metal magnetically shielded room in conjunction with a high-Tc SQUID based active compensation. Experimental results show that a noise level of pico-tesla in MCG profiles, which is necessary for clinical applications, may be achieved with the system. Moreover, stable and convenient operations of the system are demonstrated with simulating MCG measurements.     

Carathéodory's method for a class of second order differential equations on the half-line

The method of equivalent variational methods, originally due to Carathéodory for free problems in the calculus of variations is extended to investigate boundary value problems for a class of second order differential equations on the half-line. Some applications are presented to illustrate the potential of this method.     

Parton-hadron duality in event generators

The validity of local parton-hadron duality within the framework of HERWIG and JETSET event generators is investigated. We concentrate one ⁺ e ^– annihilations in LEP 2 energy range as these interactions provide theoretically the cleanest condition for the discussion of this concept. We conclude that the concept of local parton-hadron duality is not valid in either of the two generators considered.     

预测气吹精密播种机排种质量的一种简易方法

通过对气吹式精密播种机田间试验资料的相关分析，发现合格指数Ａ与｜Ｄ－Ｍ｜（重播指数与漏播指数之差的绝对值）之间里极显著负相关（ｒ＝－０．９３１２）。在对数据作进一步回归分析的基础上，本文建立了一套“由排种粒数预测排种质量”的方法。     

Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.