Single polymer molecules adsorbed to mica and the oppositely charged polymer/surfactant complexes formed at the air–water interface visualized by atomic force microscopy

In the present study, the structure and morphology of single sodium poly(styrenesulfonate) (PSS) molecules adsorbed to mica surface from the natural aqueous solution is investigated using atomic force microscopy technique. Results show that single PSS molecules are observed which show a morphology of wormlike coils. Meanwhile, single sodium poly(styrenesulfonate) (PSS)/Hexadecyltrimethylammonium bromide (CTAB) complexes deposited on mica from the air–water interface are also observed. However, the PSS/CTA⁺ complexes show different conformations by appearing in the morphology of circular patches. Experimental data are in fair agreement with the theoretical analysis.     

Understanding the dynamics of signal transduction for adsorption of gases and vapors on carbon nanotube sensors

Adsorption dynamics and their influence on signal transduction for carbon nanotube-based chemical sensors are explored using continuum site balance equations and a mass action model. These sensors are shown to possess both reversible and irreversible binding sites that can be modeled independently. For the case of irreversible adsorption, it is shown that the characteristic response time scales inversely with analyte concentration. It is inappropriate to report a detection limit for this type of sensor since any nonzero analyte concentration can be detected in theory but at a cost of increasing transduction time with decreasing concentration. The response curve should examine the initial rate of signal change as a function of analyte concentration. Conversely, a reversible sensor has a predefined detection limit, independent of the detector geometry with a characteristic time scaling that becomes constant in the zero analyte concentration limit. A simple analytical test is presented to distinguish between these two mechanisms from the transient response of a nanotube sensor array. Two systems appearing in the literature are shown to have an irreversible component, and regressed surface rate constants for this component are similar across different sensor geometries and analytes.     

Effects of chromatography conditions on intact protein separations for top-down proteomics

A chiral stationary phase (CSP) has been prepared by chemically bonding a chiral pseudo-18-crown-6 type host having a 1-phenyl-1,2-cyclohexanediol unit to 3-aminopropyl silica gel. The chiral column was prepared by the slurry-packing method in a stainless steel HPLC column. Normal mobile phases can be used with this CSP in contrast to conventional dynamic coating type CSPs. Enantiomers of 20 out of 30 amino compounds, including 20 amino acids, 2 amino acid methyl esters, 6 amino alcohols, and 2 lipophilic amines, were efficiently separated on columns with this CSP. It is noteworthy that 15 amino compounds out of 30 were separated with better separation factors and shorter retention times compared to the corresponding CSP having pseudo-18-crown-6 with 1-phenyl-1,2-ethanediol as a chiral unit. In view of the correlation between the enantiomer selectivities observed in chromatography and those obtained in gas phase FABMS-EL methods and solution phase titrations, chiral recognition in the host-guest interaction likely contributes to enantiomer separation.     

微型柱在线分离-ICP-MS法测定高纯氧化铕中的14个稀土杂质

研究了微型柱在线分离-电感耦合等离子质谱法（ICP-MS）测定高纯Eu2O3中痕量Tm的方法，研制了Cyanex272负载树脂微型分离柱，优化了分离Eu2O3基体的实验条件，在线分离测定时间为25min。建立了在线柱分离测定Tm，内标补偿法直接测定其余稀土杂质的高纯Eu2O3中14个稀土杂质的ICP-MS分析方法。方法检出限为0.01μg/g-0.15μg/g，加标回收率为91.5%-110%,相对标准偏差为1.7%-4.9%。可满足快速测定99.999%Eu2O3中14个稀土杂质的要求。     

Recyclable self-assembly-supported catalytic system for orthoalkylation

[reaction: see text] A new recyclable supported catalyst system for orthoalkylation was devised using a self-assembly consisting of the barbiturate and 2,4,6-triaminopyrimidine H-bonding motifs. At high temperature, the system is completely homogeneous so as to give an efficient catalytic activity, while it is heterogenized at room temperature to form an insoluble solid phase for the easy recovery of the catalyst after the reaction.     

Chemical lithography by Ag-nanoparticle-mediated photoreduction of aromatic nitro monolayers on Au

Patterned, amine-terminated monolayers can be fabricated from 4-nitrobenzenethiol (4-NBT) monolayers simply by irradiating under ambient conditions with visible laser after spreading Ag nanoparticles onto selected regions of the 4-NBT monolayers on Au. Au nanoparticles were adsorbed selectively onto the amine groups produced by photoreaction, and polyaniline was found to grow exclusively at the amine groups when electrochemical polymerization was conducted using the patterned substrate as the working electrode. These observations clearly support our previous contention that Ag nanoparticles can act as moderate photoelectron emitters.     

Quantitative TOF-SIMS analysis of oligomeric degradation products at the surface of biodegradable poly(alpha-hydroxy acid)s

This paper reports the development of a new method for quantification of the hydrolytic surface degradation kinetics of biodegradable poly(alpha-hydroxy acid)s using time-of-flight secondary ion mass spectrometry (TOF-SIMS). We report results from static SIMS spectra of a series of poly(alpha-hydroxy acid)s including poly(glycolic acid), poly(L-lactic acid), and random poly(D,L-lactic acid-co-glycolic acid) hydrolyzed in various buffer systems. The distribution of the most intense peak intensities of ions generated in high mass range of the spectrum reflects the intact degradation products (oligomeric hydrolysis products) of each biodegradable polymer. First, a detailed analysis of the oligomeric ions is given based on rearrangement of the intact hydrolysis products. The pattern of ions can distinguish both degradation-generated intact oligomers and their fragment ion peaks with a variety of combinations of each repeat unit. Then, the integration and summation of the area of all ion peaks with the same number of repeat units is proposed as a measurement that provides a more accurate MW average than the typically used method which counts only the most intense peak. The multiple ion summation method described in this paper would be practical in the improvement of quantitative TOF-SIMS studies as a better data reduction method, especially in the surface degradation kinetics of biodegradable polymers.     

Deoxyhypusine synthase is phosphorylated by protein kinase C in vivo as well as in vitro

Deoxyhypusine synthase catalyzes the first step in the posttranslational synthesis of an unusual amino acid, hypusine, in the eukaryotic translation initiation factor 5A (eIF-5A) precursor protein. We earlier observed that yeast recombinant deoxyhypusine synthase was phosphorylated by protein kinase C (PKC) in vitro (Kang and Chung, 1999) and the phosphorylation rate was synergistically increased to a 3.5-fold following treatment with phosphatidylserine (P.Ser)/diacylglycerol (DAG)/ Ca(2+), suggesting a possible involvement of PKC. We have extended study on the phosphorylation of deoxyhypusine synthase in vivo in different cell lines in order to define its role on the regulation of eIF5A in the cell. Deoxyhypusine synthase was found to be phosphorylated by endogenous kinases in CHO, NIH3T3, and chicken embryonic cells. The highest degree of phosphorylation was found in CHO cells. Moreover, phosphorylation of deoxyhypusine synthase in intact CHO cells was revealed and the expression of phosphorylated deoxyhypusine synthase was significantly diminished by diacyl ethylene glycol (DAEG), a PKC inhibitor, and enhanced by phorbol 12-myristate 13-acetate (PMA) or Ca(2+)/DAG. Endogenous PKC in CHO cell and cell lysate was able to phosphorylate deoxyhypusine synthase and this modification is enhanced by PMA or Ca(2+) plus DAG. Close association of PKC with deoxyhypusine synthase in the CHO cells was evident in the immune coprecipitation and was PMA-, and Ca(2+)/phospholipid dependent. These results suggest that phosphorylation of deoxyhypusine synthase was PKC-dependent cellular event and open a path for possible regulation in the interaction with eIF5A precursor for hypusine synthesis.     

Formation of protonic defects in perovskite-type oxides with redox-active acceptors: case study on Fe-doped SrTiO(3)

The thermodynamics of water incorporation into Fe-doped SrTiO(3) was investigated by thermogravimetric measurements. Changes in valence states of redox-active dopant ions (Fe(3+)/Fe(4+)) with water vapor pressure were taken into account in the defect chemical analysis. The proton solubility was significantly enhanced by the presence of the redox centers. The hydration enthalpies and entropies were -60 kJ mol(-1) and -122 J mol(-1) K(-1). The defect chemical model was applied to describe the water vapor dependence of the electrical conductivity in mixed ionic and electronic conducting Fe-doped SrTiO(3) single crystals.     

Purification of a primary coolant in a nuclear power plant using a magnetic filter - electrodeionization hybrid separation system

A magnetic filter — continuous electrodeionization (CEDI) hybrid separation system was investigated for the purification of the primary coolant in a nuclear power plant. A magnetic filter system with a 3000 Gauss magnetic field and a CEDI system with a cell consisting of 3 compartments were used for the removal of magnetite and nickel ions, respectively. The hybrid separation system achieved removal rates of 98% for magnetite and 99% for the nickel ions demonstrating its feasibility for the purification of primary coolant.The authors gratefully acknowledge the Basic Atomic Energy Research Institute (BAERI) program at the Korea Institute of Science and Technology Evaluation and Planning (KISTEP) for the financial support to carry out this work.