In-capillary micro solid-phase extraction and capillary electrophoresis separation of heterocyclic aromatic amines with nanospray mass spectrometric detection

A miniaturised technique to analyse and detect heterocyclic aromatic amines (HAs) using micro solid-phase extraction (SPE) coupled on-line (in-capillary) to capillary electrophoresis (CE) separation with nanospray (nESI) mass spectrometry (MS) detection has been developed. HAs are mutagenic and carcinogenic compounds formed at low levels in protein-rich food during cooking. Due to the low concentrations of HAs and the high complexity of the matrix in which they exist, sensitive and selective analytical methods are required for quantification. SPE was performed on a packed bed of C₁₈ particles inside the CE capillary, which minimised the dead volume. The on-line coupling of SPE, CE and nESI-MS reduced the time for extraction and identification to less than half an hour, which will allow for screening of several samples per day. The new technique provides short analysis time, low sample and solvent consumption, and HAs in standard solutions were easily detected at 12–17 fmol injections, and in spiked urine samples at 750–810 fmol injections.     

Novel large heteropolymetalate complexes formed from Ni(II) and cryptate [As<Subscript>4</Subscript>W<Subscript>40</Subscript>O<Subscript>140</Subscript><Superscript>28-</Superscript>

The heteropolytungstate (NH4)₂₀[Na2(H₂O)₂Ni(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀] · 61H₂O is obtained by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀] · 60H₂O with NiCl₂ · 6H₂O and NH₄Cl in pH≈4.0. The structure and chemical composition are determined by X-ray diffraction analysis and element analysis. The crystal data and main structure refinement are: a = 1.33135(18) nm, b = 1.9722(3) nm, c = 3.6430(5) nm, α = 78.010(2)°, β = 82.145(2)δ, γ = 74.385(2)°, V = 8.978(2) nm³, triclinic crystal system, space group: P1, Z = 2, R1 = 0.0512, and wR2 = 0.0684(I >2σ). The four S2 sites of the big cyclic ligand [As₄W₄₀O₁₄₀]^28- are occupied by two Na⁺ and two Ni²⁺ respectively, and each site supplies four O_d coordinating to metal ion. The coordination number of Ni²⁺ is six, and that of two Na⁺ is five and six respectively. The third Ni²⁺ locates outside the cyclic [As₄W₄₀O₁₄₀]^28- and connects with one O_d, and its coordination number is six.     

Study of the mechanism of base induced dehydrobromination of trans-β-bromostyrene

Observation that rates of dehydrobromination of trans-β-bromostyrene (1) and the Hofmann degradation of tetrabutyl ammonium cation depend on strength of base in different ways and that treatment of 1 with base results in fast abstraction of the β-proton imply the possibility that the dehydrobromination of 1 could proceed via α-elimination and Ph migration. In order to clarify this question, β-¹³C-labeled 1 was obtained and subjected to PTC dehydrobromination which proceeds without migration of Ph. The obtained results are consistent with an irreversible E1cB mechanism.     

n-Hexane dehydrocyclization over Pt?Ni supported on alumina catalysts

Pt–Ni/-Al₂O₃ catalysts have been prepared and studied in n-hexane dehydrocyclization. The selectivity for benzene and toluene, a chain lengthening product formation was improved by Ni and correlated with its content.

---

Pt–Ni/-Al₂O₃ -. Ni . Ni , .

     

Synthesis and Antiproliferative Activity of Cyano and Amidino Substituted 2-Phenylbenzothiazoles

Series of cyano, dicyano, amidino, and diamidino substituted 2-phenylbenzothiazoles were prepared. Mono- and dicyano substituted benzothiazoles were obtained by condensation of appropriate substituted benzaldehydes with 2-aminothiophenol or 4-amino-3-mercaptobenzonitrile. The appropriate amidines or diamidines were prepared by Pinner reaction. The compounds were tested against breast, prostate, and lung cancer cell lines in a 72 h cytotoxicity assay. Many of the compounds had at 10 μM activity equivalent to 2-(4-aminophenyl)benzothiazole, while four compounds had significantly better activity, particularly in the breast cancer model.     

Elucidation of the vicarious nucleophilic substitution of hydrogen mechanism via studies of competition between substitution of hydrogen, deuterium, and fluorine.

Relations of rates of the vicarious nucleophilic substitution of hydrogen (VNS) and S(N)Ar substitution of fluorine in 2-fluoronitrobenzenes with chloroalkyl aryl sulfone carbanions were determined from competitive experiments carried out at various concentrations of base. The observed dependence of the VNS/S(N)Ar rate ratio on the base concentration confirmed the two-step mechanism of the VNS, which consists of reversible formation of sigma(H) adducts of the alpha-chlorocarbanion to nitroarene, followed by base-induced beta-elimination of HCl. It was also evidenced that both of these processes can be the rate-limiting steps: the beta-elimination at low base concentration and the nucleophilic addition at high base concentration. Consistent with that conclusion is the finding that the kinetic isotope effect in the VNS reaction decreases from 4.2 (a value typical of a primary KIE) to 0.8 (a value typical of a secondary KIE) with increasing base concentration. Also reported is our discovery that the S(N)Ar substitution of the 2-fluoronitrobenzenes studied in this work was subject to base catalysis under some of the experimental conditions employed in our competitive experiments.     

Decomposition of Toluene and Acetone in Packed Dielectric Barrier Discharge Reactors

The influences of TiO₂ catalytic material and glass pellet packing on the decomposition efficiency of toluene and acetone in air by dielectric barrier discharge (DBD) reactors were experimentally investigated in this study. The effects of both packing materials on the formation of byproducts such as CO and CO₂ were also evaluated. Experimental results indicate that the introduction of glass materials into the plasma zone of a wire-tube reactor would improve the decomposition efficiency of toluene and acetone compared to a nonpacked reactor. The apparent decomposition rate constant of a glass packed-bed reactor was 4.5–4.8 times greater than that of a nonpacked reactor. The results also indicate that the decomposition rate constant of toluene was approximately 2.6 times higher than that of acetone no matter which type reactor was utilized. The application of TiO₂ coated pellets in DBD reactors will enforce the hydrocarbon byproducts to further be oxidized to CO₂, notwithstanding, it will not significantly improve the performance of the reactors in the decomposition of toluene and acetone, and in the formation of CO. The results show that the best selectivity of CO₂ for acetone decomposition in a TiO₂ coated pellets packed-bed reactor was approximately 40% higher than that in a glass packed-bed reactor.     

Synthesis,characterization and DNA-binding properties of mixed porphyrin–polypyridyl ruthenium(II) complexes

Two mixed porphyrin–polypyridyl Ru^II complexes [Ru(bpy)₂(MPyTPP)Cl]Cl (1) and [Ru(phen)₂(MPyTPP)Cl]Cl ( 2 ) (bpy=2,2-bipyridine; phen=1,10-phenanthroline; MPyTPP=5-monopyridyl-10,15,20–triphenylporphyrin) have been synthesized and characterized by elementary analysis, e.s.–m.s., cyclic voltammetry and u.v.–vis. spectroscopy. The DNA-binding properties of these complexes were investigated by electronic spectra, c.d. spectra and viscosity experiments. The results suggested that both complexes (1) and (2) bind to DNA in an outside binding mode. At the same time, theoretical calculations applying the ab initio and the density functional theory (DFT) methods were also performed, and the results showed that there is no good planarity on the main ligand MPyTPP of these complexes, and there are rather great distortion angles (dihedral angles ca. 72°) between the porphrin ring and each of the 10-, 15-, 20-phenyl groups. This may be the reason why the complexes bind to DNA in an outside mode, instead of an intercalative mode.     

Quantitative analysis of 23-hydroxybetulinic acid in mouse plasma using electrospray liquid chromatography/mass spectrometry

23-Hydroxybetulinic acid is a newly isolated derivative of betulinic acid. The agent exhibits potential anti-tumor activity and functions in this regard via apoptosis. In support of pharmacokinetic and toxicological evaluations, a new assay based on liquid chromatography/mass spectrometry (LC/MS) was developed for the quantitative analysis of 23-hydroxybetulinic acid. Sample preparation consisted of extraction of the plasma by the addition of methylene chloride followed by centrifugation. Aliquots of the supernatant were analyzed using an isocratic reversed-phase high-performance liquid chromatography (HPLC) system coupled to a negative ion electrospray mass spectrometer. Molecules of 23-hydroxybetulinic acid and the internal standard limonin were detected using selected ion monitoring at m/z 471 and 469, respectively. The limit of detection of 23-hydroxybetulinic acid was 0.05 pg (0.11 fmol) injected on-column (10 pg/mL, 5 microL injection volume), and the limit of quantitation was 10 pg (21.19 fmol, 2 ng/mL, 5 muL injection volume). 23-Hydroxybetulinic acid was stable in plasma samples at -20 degrees C for at least 3 weeks. The intra-day and inter-day coefficients of variation of the assay were 3.0 and 4.8%, respectively. The utility of the assay was demonstrated by measuring 23-hydroxybetulinicacid in mouse plasma following intragastric administration (IG) in vivo. Pharmacokinetic parameters were calculated using the 3P97 pharmacokinetic software package. A two-compartment, first-order model was selected for pharmacokinetic modeling. The result showed that after IG of 200 mg/kg 23-hydroxybetulinic acid, the plasma concentrations reached peaks at 2 h with C(max) of 3.1 microg/mL. The 200 mg/kg 23-hydroxybetulinic acid suspension IG doses were found to have long elimination half-lives of 25.6 h and low bioavailability of 2.3%. No interference was noted due to endogenous substances. These analytical methods should be of value in future studies related to the development and characterization of 23-hydroxybetulinic acid.     

Development and application of a simple routine method for the determination of selenium in serum by octopole reaction system ICPMS

The aim of the study was to develop an inductively coupled plasma mass spectrometry (ICPMS) method for robust and simple routine determination of selenium in serum. Polyatomic interferences on ⁷⁶Se, ⁷⁷Se, and ⁷⁸Se were removed by applying an octopole reaction system ICPMS with the reaction cell pressurized with H₂ gas. We developed a novel simple optimization routine for the H₂ gas flow based on a signal-to-noise ratio (SNR) calculation of the selenium signal measured in a single selenium standard. The optimum H₂ flow was 2.9 mL min^–1. The selenium content in serum was determined after a 50-fold dilution with 0.16 M HNO₃ and quantified by using addition calibration and gallium as an internal standard. The method detection limit was 0.10 g L^–1 for ⁷⁶Se and ⁷⁸Se and 0.13 g L^–1 for ⁷⁷Se. Human serum samples from a case-control study investigating if selenium was associated with risk of colorectal adenoma were analyzed. The average selenium concentration for the control group (n=768) was 137.1 g L^–1 and the range was 73.4–305.5 g L^–1. The within-batch repeatability (a batch is ten samples) estimated from 182 replicate analyses was 6.3% coefficient of variation (CV), whereas the between-batch repeatability was 7.4% CV estimated from 361 replicates between batches. The method accuracy was evaluated by analysis of a human serum certified reference material (Seronorm Serum level II, Sero A/S, Norway). There was a fairly good agreement between the measured average of 145±3 g L^–1 (n=36) and the certified value of 136±9 g L^–1. In addition the method was successfully applied for analysis of zinc serum concentrations without further optimization. For the Seronorm certified reference material a value of 911±75 g L^–1 (n=31) for zinc was obtained, which corresponds well to the certified zinc value of 920±60 g L^–1.