Advances in pulsed-laser atom probe: instrument and specimen design for optimum performance.

The performance of the pulsed-laser atom probe can be limited by both instrument and specimen factors. The experiments described in this article were designed to identify these factors so as to provide direction for further instrument and specimen development. Good agreement between voltage-pulsed and laser-pulsed data is found when the effective pulse fraction is less than 0.2 for pulsed-laser mode. Under the conditions reported in this article, the thermal tails of the peaks in the mass spectra did not show any significant change when produced with either a 10-ps or a 120-fs pulsed-laser source. Mass resolving power generally improves as the laser spot size and laser wavelength are decreased and as the specimen tip radius, specimen taper angle, and thermal diffusivity of the specimen material are increased. However, it is shown that two of the materials used in this study, aluminum and stainless steel, depend on these factors differently. A one-dimensional heat flow model is explored to explain these differences. The model correctly predicts the behavior of the aluminum samples, but breaks down for the stainless steel samples when the tip radius is large. A more accurate three-dimensional model is needed to overcome these discrepancies.     

An efficient microwave assisted synthesis of N′-aryl/(alkyl)-substituted N-(4-hydroxy-6-phenylpyrimidin-2-yl)guanidines: Scope and limitations

Treatment of N-[(4-hydroxy-6-phenyl)pyrimidin-2-yl]cyanamide with 1° alkyl or arylamines in isopropyl alcohol for only 10 min at 110–120 °C under microwave conditions gave the corresponding N′-alkyl(aryl)guanidine derivatives in excellent yields (65–84%). Isolated yields were greatest when >1.0 equiv. of amines were employed, but excellent results were also obtained when aryl and alkylamines were reacted with a more atom-economical loading (1.0 equiv.; 70% and 72% ave. yields, respectively). Arylamines with either highly electron withdrawing substituents (e.g. CO₂H) or pi-deficient heterocycles (e.g. variously substituted aminopyridines) did not work well under these conditions, and reaction with ureas and/or amino acids did not give detectable products. Work-up was exceedingly simple, and involved simple collection and washing of product on a sintered glass funnel. Products were obtained in analytically pure form and required approximately 1 h to prepare, start to finish.     

Cloning of the Orange Light‐Producing Luciferase from Photinus scintillans—A New Proposal on how Bioluminescence Color is Determined

Unlike the enchanting yellow‐green flashes of light produced on warm summer evenings by Photinus pyralis, the most common firefly species in North America, the orange lights of Photinus scintillans are infrequently observed. These Photinus species, and likely all bioluminescent beetles, use the same substrates beetle luciferin, ATP and oxygen to produce light. It is the structure of the particular luciferase enzyme that is the key to determining the color of the emitted light. We report here the molecular cloning of the P. scintillans luc gene and the expression and characterization of the corresponding novel recombinant luciferase enzyme. A comparison of the amino acid sequence with that of the highly similar P. pyralis enzyme and subsequent mutagenesis studies revealed that the single conservative amino acid change tyrosine to phenylalanine at position 255 accounted for the entire emission color difference. Additional mutagenesis and crystallographic studies were performed on a H‐bond network, which includes the position 255 residue and five other stringently conserved beetle luciferase residues, that is proximal to the substrate/emitter binding site. The results are interpreted in the context of a speculative proposal that this network is key to the understanding of bioluminescence color determination.     

Chromatographic separation of americium from europium using bis-2,6-(5,6,7,8-tetrahydro-5,9,9-trimethyl-5,8-methano-1,2,4-benzotriazin-3-yl) pyridine

The separation of americium(III) from europium(III) was achieved utilizing a bis-2,6-(5,6,7,8-tetrahydro-5,9,9-trimethyl-5,8-methano-1,2,4-benzotriazin-3-yl) pyridine (CA-BTP) chromatographic resin. The extraction chromatographic materials were prepared using various concentrations of CA-BTP. This new, hydrolytically stable extractant was impregnated on an inert polymeric support at 40% loading. The uptake of Am(III) and Eu(III) by this material from 0.1 to 4.0 M aqueous HNO₃ solutions was measured. The resulting dry weight distribution ratios, D _w , indicated a strong preference for Am(III) with little affinity for Eu(III). These results are similar to recently reported solvent extraction studies indicating a maximum uptake of Am(III) in the 0.5–1.0 M HNO₃ range. The resin preparation, performance, and characterization of the Am/Eu separation are reported herein.

     

Electrochemical Characterization of Myoglobin‐Polylysine Films at a Temperature Range of 6–80 °C

This work demonstrated for the first time that myoglobin cross‐linked in polylysine films is electrochemically active at 6 °C. At 6 °C, these protein films exhibited reversible reduction/oxidation peaks which are characteristic of Fe^III/Fe^II redox couple. The estimated current function densities (J=1.6×10^?4 C/V cm²), surface concentrations (Γ_T=0.10 nmol/cm²) and standard electron transfer constant (k_s=13.86 s^?1) at 6 °C for the data taken at a scan rate of 0.1 V/s were similar to those which were obtained at 10, 15 and 23 °C. Basically, this study shows a possible electrocatalytic application of these myoglobin/polylysine films, for example in low temperature sensing applications.     

Cation disorder in NaW2O6+δ·nH2−zO post-ion exchange with K, Rb, Sr, and Cs

The structure of the defect pyrochlore NaW₂O_6+δ·nH_2−zO after ion exchange with K, Rb, Sr or Cs for Na has been investigated using thermal analysis, solid-state nuclear magnetic resonance, laboratory X-ray and neutron diffraction methods. Neutron diffraction studies show that both the A-type cations (Na⁺, K⁺, Rb⁺, and/or Cs⁺) and the water molecules reside within the channels that form in the 111 direction of the W₂O₆ framework and that these strongly interact. The analytical results suggest that the water and A-type cations compete for space in the tunnels within the W₂O₆ pyrochlore framework, with the total number of water molecules and cations being approximately constant in the six samples investigated. The interplay between the cations and water explains the non-linear dependence of the a lattice parameter on the choice of cation. It appears that the ion-exchange capacity of the material will be controlled by the amount of water initially present in the sample.     

Structure effects on the energetics of the electrochemical reduction of CO2 by copper surfaces

Polycrystalline copper electrocatalysts have been experimentally shown to be capable of reducing CO₂ into CH₄ and C₂H₄ with relatively high selectivity, and a mechanism has recently been proposed for this reduction on the fcc(211) surface of copper, which was assumed to be the most active facet. In the current work, we use computational methods to explore the effects of the nanostructure of the copper surface and compare the effects of the fcc(111), fcc(100) and fcc(211) facets of copper on the energetics of the electroreduction of CO₂. The calculations performed in this study generally show that the intermediates in CO₂ reduction are most stabilized by the (211) facet, followed by the (100) facet, with the (111) surface binding the adsorbates most weakly. This leads to the prediction that the (211) facet is the most active surface among the three in producing CH₄ from CO₂, as well as the by-products H₂ and CO. HCOOH production may be mildly enhanced on the more close-packed surfaces ((111) and (100)) as compared to the (211) facet, due to a change in mechanism from a carboxyl intermediate to a formate intermediate. The results are compared to published experimental data on these same surfaces; the predicted trends in voltage requirements are consistent between the experimental and computational data.     

Polarity determination of wurtzite-type crystals using hard x-ray photoelectron diffraction

The surface structure of a single-crystal ZnO wafer was studied by angle-resolved x-ray photoelectron spectroscopy (ARXPS) using synchrotron radiation. As a result, well-defined x-ray photoelectron diffraction (XPD) patterns were obtained for the (0001) and (000$\overline{1}$) polar surfaces using the photoemission from the Zn 2p_3/2 and O 1s core levels. The XPD patterns were indexed assuming forward scattering of photoelectrons by neighboring ions. Further, the XPD patterns for the (0001) and (000$\overline{1}$) surfaces were different from each other, indicating the possibility for using the XPD technique for polarity determination.