Dynamical Equilibrium between Brønsted and Lewis Sites in Zeolites: Framework-Associated Octahedral Aluminum

While the structures of Brønsted acid sites (BAS) in zeolites are well understood, those of Lewis acid sites (LAS) remain an active area of investigation. Under hydrated conditions, the reversible formation of framework-associated octahedral aluminum has been observed in zeolites in the acidic form. However, the structure and formation mechanisms are currently unknown. In this work, combined experimental ²⁷Al NMR spectroscopy and computational data reveal for the first time the details of the zeolite framework-associated octahedral aluminium. The octahedral LAS site becomes kinetically allowed and thermodynamically stable under wet conditions in the presence of multiple nearby BAS sites. The critical condition for the existence of such octahedral LAS appears to be the availability of three protons: at lower proton concentration, either by increasing the Si/Al or by ion-exchange to non-acidic form, the tetrahedral BAS becomes thermodynamically more stable. This work resolves the question about the nature and reversibility of framework-associated octahedral aluminium in zeolites.     

High-accuracy determination of iron in seawater by isotope dilution multiple collector inductively coupled plasma mass spectrometry (ID-MC-ICP-MS) using nitrilotriacetic acid chelating resin for pre-concentration and matrix separation

In the present paper we describe a robust and simple method to measure dissolved iron (DFe) concentrations in seawater down to <0.1 nmol L⁻¹ level, by isotope dilution multiple collector inductively coupled plasma mass spectrometry (ID-MC-ICP-MS) using a ⁵⁴Fe spike and measuring the ⁵⁷Fe/⁵⁴Fe ratio. The method provides for a pre-concentration step (100:1) by micro-columns filled with the resin NTA Superflow of 50 mL seawater samples acidified to pH 1.9. NTA Superflow is demonstrated to quantitatively extract Fe from acidified seawater samples at this pH. Blanks are kept low (grand mean 0.045 ± 0.020 nmol L⁻¹, n = 21, 3× S.D. limit of detection per session 0.020–0.069 nmol L⁻¹ range), as no buffer is required to adjust the sample pH for optimal extraction, and no other reagents are needed than ultrapure nitric acid, 12 mM H₂O₂, and acidified (pH 1.9) ultra-high purity (UHP) water. We measured SAFe (sampling and analysis of Fe) reference seawater samples Surface-1 (0.097 ± 0.043 nmol L⁻¹) and Deep-2 (0.91 ± 0.17 nmol L⁻¹) and obtained results that were in excellent agreement with their DFe consensus values: 0.118 ± 0.028 nmol L⁻¹ (n = 7) for Surface-1 and 0.932 ± 0.059 nmol L⁻¹ (n = 9) for Deep-2. We also present a vertical DFe profile from the western Weddell Sea collected during the Ice Station Polarstern (ISPOL) ice drift experiment (ANT XXII-2, RV Polarstern) in November 2004–January 2005. The profile shows near-surface DFe concentrations of 0.6 nmol L⁻¹ and bottom water enrichment up to 23 nmol L⁻¹ DFe.     

Effects of electrostatic screening on the conformation of single DNA molecules confined in a nanochannel

Single T4-DNA molecules were confined in rectangular-shaped channels with a depth of 300 nm and a width in the range of 150-300 nm casted in a poly(dimethylsiloxane) nanofluidic chip. The extensions of the DNA molecules were measured with fluorescence microscopy as a function of the ionic strength and composition of the buffer as well as the DNA intercalation level by the YOYO-1 dye. The data were interpreted with the scaling theory for a wormlike polymer in good solvent, including the effects of confinement, charge, and self-avoidance. It was found that the elongation of the DNA molecules with decreasing ionic strength can be interpreted in terms of an increase of the persistence length. Self-avoidance effects on the extension are moderate, due to the small correlation length imposed by the channel cross-sectional diameter. Intercalation of the dye results in an increase of the DNA contour length and a partial neutralization of the DNA charge, but besides effects of electrostatic origin it has no significant effect on the bare bending rigidity. In the presence of divalent cations, the DNA molecules were observed to contract, but they do not collapse into a condensed structure. It is proposed that this contraction results from a divalent counterion mediated attractive force between the segments of the DNA molecule.     

Supramolecular Control over Split‐Luciferase Complementation

Supramolecular split‐enzyme complementation restores enzymatic activity and allows for on–off switching. Split‐luciferase fragment pairs were provided with an N‐terminal FGG sequence and screened for complementation through host‐guest binding to cucurbit[8]uril (Q8). Split‐luciferase heterocomplex formation was induced in a Q8 concentration dependent manner, resulting in a 20‐fold upregulation of luciferase activity. Supramolecular split‐luciferase complementation was fully reversible, as revealed by using two types of Q8 inhibitors. Competition studies with the weak‐binding FGG peptide revealed a 300‐fold enhanced stability for the formation of the ternary heterocomplex compared to binding of two of the same fragments to Q8. Stochiometric binding by the potent inhibitor memantine could be used for repeated cycling of luciferase activation and deactivation in conjunction with Q8, providing a versatile module for in vitro supramolecular signaling networks.     

The Critical Role Played by the Catalytic Moiety in the Early‐Time Photodynamics of Hydrogen‐Generating Bimetallic Photocatalysts

The effect of the catalytic moiety on the early‐time photodynamics of Ru/M (M=Pt or Pd) bimetallic photocatalysts is studied by ultrafast transient absorption spectroscopy. In comparison to the Ru/Pd photocatalyst described earlier, the Ru/Pt analogue shows complex excited‐state dynamics with three distinct kinetic components ranging from sub‐ps to 10² ps, requiring a more sophisticated photophysical model than that developed earlier for the Ru/Pd complex. In the Pu/Pt photocatalyst, an additional lower‐lying excited state is proposed to quench the hot higher‐lying triplet metal‐to‐ligand charge‐transfer states. Furthermore, a strong excitation wavelength dependence on the population of excited states is observed for both the Ru/Pt and Ru/Pd complexes, indicating a non‐equilibrated distribution even on the 10² ps timescale. These insights shed light on the significant impact of the catalytic moiety on the fundamental early‐time photophysics of Ru‐based photocatalysts.     

Cross-linking-induced permanently perpendicular helix orientation in surface-grafted polyglutamate films

Using a chemical cross-linking procedure, surface-grafted polyglutamate films with a permanently perpendicular helix orientation were prepared. A surface-grafted alpha-helical polyglutamate film containing polymerizable side groups was synthesized by ring-opening terpolymerization of 50 molar% gamma-methyl-L-glutamate N-carboxyanhydride (NCA), 30% gamma-stearyl-L-glutamate NCA and 20% gamma-4-vinylbenzyl-L-glutamate NCA initiated from a silicon substrate functionalized with primary amino groups. The average tilt angle of the end-grafted helices in this film is approximately 66 degrees , indicating a nearly parallel helix orientation with respect to the substrate surface. After swelling of the grafted terpolyglutamate film in stearyl methacrylate and subsequent radical cross-linking, the average helix tilt angle decreases to about 11 degrees, indicating an almost perpendicular helix orientation. The film thickness increases accordingly from 151 A before to approximately 390 A after cross-linking. Extensive solvent treatment of the cross-linked film shows that the perpendicular helix orientation is permanent.     

Synthesis and characterization of surface-grafted polyacrylamide brushes and their inhibition of microbial adhesion

A method is presented to prevent microbial adhesion to solid surfaces exploiting the unique properties of polymer brushes. Polyacrylamide (PAAm) brushes were grown from silicon wafers by atom transfer radical polymerization (ATRP) using a three-step reaction procedure consisting of immobilization of a coupling agent gamma-aminopropyltriethoxysilane, anchoring of an ATRP initiator 4-(chloromethyl)benzoyl chloride, and controlled radical polymerization of acrylamide. The surfaces were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, ellipsometry, and contact-angle measurements. The calculated grafting density pointed to the presence of a dense and homogeneous polymer brush. Initial deposition rates, adhesion after 4 h, and detachment of two bacterial strains (Staphylococcus aureus ATCC 12600 and Streptococcus salivarius GB 24/9) and one yeast strain (Candida albicans GB 1/2) to both PAAm-coated and untreated silicon surfaces were investigated in a parallel plate flow chamber. A high reduction (70-92%) in microbial adhesion to the surface-grafted PAAm brush was observed, as compared with untreated silicon surfaces. Application of the proposed grafting method to silicone rubbers may offer great potential to prevent biomaterials-centered infection of implants.     

Polyisocyanides derived from tripeptides of alanine

Helical polymers of isocyanotripeptides derived from alanine have been synthesized and their architectures studied in detail. The helical conformation of the polyisocyanotripeptides is stabilized by internal hydrogen-bonding arrays between the tripeptide side chains. The possibility of extending the well-defined hydrogen-bonded array, from dipeptide to tripeptide side chains, depends strongly on the stereochemistry of the constituent alanine amino acids, as has been shown by circular dichroism and IR studies. In polymers containing a weaker hydrogen-bonding array adjacent to the polymer backbone, due to steric interactions between the alanine methyl groups, a stronger second hydrogen-bonding array was present between the peptide bonds furthest away from the main chain, which is probably a result of stretching/compression of the helical-polymer conformation.     

Structure of ethene adsorption sites on supported metal catalysts from in situ XANES Analysis

The structures of the catalytically active sites in supported metal catalysts are a long sought after goal. In this study, XAS has been used to establish these structures. The ethene-induced changes in the XAS spectra as a function of temperature and pressure were correlated to changes in the adsorption mode of the hydrocarbon. At low temperature, ethene was adsorbed in on-top (pi) and bridged (di-sigma) sites on small platinum clusters. Below room temperature, the adsorbed ethene was dehydrogenated to an ethylidyne species, which was adsorbed in threefold Pt sites. On larger clusters the dehydrogenation proceeded at higher temperature indicating a different reactivity. EXAFS results showed that changes in the geometrical structures were mainly due to (co)adsorbed hydrogen. Our results for platinum agree with those obtained using other techniques proving that detailed shape analysis of the L3 edge XANES is a practical tool to determine the structure of the sites that are involved in bonding to reactants and intermediates. Application to gold and alloy catalysts showed that ethene induced a significant change in the electronic structure of gold nanoclusters that could be interpreted as ethene adsorbed on top of single gold atoms or in bridged sites. Ethene adsorbed on both platinum and gold in the bimetallic clusters.     

Synthesis of hyaluronic acid oligomers using Ph2SO/Tf2O-mediated glycosylations

The synthesis of hyaluronic acid (HA) oligomers using a stepwise glycosylation strategy is described. This method employs protected 1-hydroxyuronic acid and 1-phenylthio glucosamine donors, both of which are activated with the Ph2SO/Tf2O activator system.