Synthesis of the 4-methyl-1,2-oxazetidine-4-carboxylic acid moiety of the originally proposed halipeptin A and B structures

O-Alkylation of N-hydroxycarbamate 6 with iodo ester 5 affords 15, which was elaborated to mesylate 4. Intramolecular N-alkylation affords methyl N-Boc-4-methyl-1,2-oxazetidine-4-carboxylate (3). The geminal coupling constant of the methylene protons is 8.5 Hz, which is much smaller than the 12.0 Hz reported for halipeptins A and B. This confirms that the halipeptins do not contain an oxazetidinecarboxylic acid as originally proposed in structure 1, but a thiazoline as in the revised structure 2. The unusual O-alkylation of 5 probably proceeds by an electron transfer mechanism.     

Investigation of the metabolic fate of 2-, 3- and 4-bromobenzoic acids in bile-duct-cannulated rats by inductively coupled plasma mass spectrometry and high-performance liquid chromatography/inductively coupled plasma mass spectrometry/electrospray mass spectrometry

Inductively coupled plasma mass spectrometry (ICPMS) has been used to determine the rate and routes of excretion of bromine following the intraperitoneal administration (50 mg kg(-1)) of 2-, 3- and 4-bromobenzoic acids to male bile-duct-cannulated rats. Analysis of urine and bile for (79/81)Br using ICPMS showed that all three bromobenzoic acids were rapidly excreted (82-98%) within 48 h of dosing, primarily via the urine. High-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC/ICPMS) was then used to obtain metabolite profiles for bile and urine. These profiles revealed that extensive metabolism had taken place, with the unchanged bromobenzoic acids forming a minor part of the total of compound-related material detected. Concomitant MS studies, supplemented by alkaline hydrolysis, enabled the identification of the major metabolite of all three of the bromobenzoic acids as a glycine conjugate. Ester glucuronide conjugates were also identified, but formed only a small proportion of total.     

Spin forbidden chemical reactions of transition metal compounds. New ideas and new computational challenges

Many reactions of transition metal compounds involve a change in spin. These reactions may proceed faster, slower--or at the same rate as--otherwise equivalent processes in which spin is conserved. For example, ligand substitution in [CpMo(Cl)2(PR3)2] is faster than expected, whereas addition of dinitrogen to [Cp*Mo(Cl)(PMe3)2] is slow. Spin-forbidden oxidative addition of ethylene to [Cp*Ir(PMe3)] occurs competitively with ligand association. To explain these observations, we discuss the shape of the different potential energy surfaces (PESs) involved, and the energy of the minimum energy crossing points (MECPs) between them. This computational approach is of great help in understanding the mechanisms of spin-forbidden reactions, provided that accurate calculations can be used to predict the relevant PESs. Density functional theory, especially using gradient-corrected and hybrid functionals, performs reasonably well for the difficult problem of predicting the energy splitting between different spin states of transition metal complexes, although careful calibration is needed.     

The practical synthesis of a novel and highly potent analogue of bryostatin

Macrocycle 1 is a new highly potent analogue of bryostatin 1, a promising anti-cancer agent currently in human clinical trials. In vitro, 1 displays picomolar affinity for PKC and exhibits over 100-fold greater potency than bryostatin 1 when tested against various human cancer cell lines. Macrocycle 1 can be generated in clinically required amounts by chemical synthesis in only 19 steps (LLS) and represents a new clinical lead for the treatment of cancer.     

New synthetic pathways into dithiazolyl radicals: Preparation and characterisation of 3′-methyl-benzo-1,3,2-dithiazolyl, M’BDTA

A general three-step synthesis to a range of benzo-fused-1,3,2-dithiazolylium salts bearing both electron-withdrawing (CN) and electron-donating (Me) groups is described. This methodology has also been extended to pyridyl derivatives and offers a potential route to a diversity of 1,3,2-dithiazolylium rings and their corresponding 1,3,2-dithiazolyl free radicals. The key steps in the reaction are treatment of a substituted 1,2,-dichlorobenzene with two equivalents of [^tBuS]Na, followed by chlorination to yield the corresponding bis(sulfenyl chloride). Subsequent ring closure with Me₃SiN₃ yields the target 1,3,2-dithiazolylium ring system in good yield. The preparation and crystal structures of 3′-methyl-benzo-1,3,2-dithiazolylium chloride and 3′-methyl-benzo-1,3,2-dithiazolyl are described and the electronic properties of the radical examined through EPR spectroscopy, DFT calculations and variable temperature magnetic susceptibility measurements.     

Hydrothermal synthesis and magnetic properties of novel Mn(II) and Zn(II) materials with thiolato-carboxylate donor ligand frameworks

The hydrothermal reaction of thiosalicylic acid, (C(6)H(4)(CO(2)H)(SH)-1,2) with manganese(III) acetate leads to formation of the coordination solid [Mn(5)((C(6)H(4)(CO(2))(S)-1,2)(2))(4)(mu3-OH)2] (1) via a redox reaction, where resulting manganese(II) centres are coordinated by oxygen donor atoms and S-S disulfide bridge formation is simultaneously observed. Reaction of the same ligand under similar conditions with zinc(II) chloride yields the layered coordination solid [Zn(C(6)H(4)(CO(2))(S)-1,2)] (2). Hydrothermal treatment of manganese(III) acetate with 2-mercaptonicotinic acid, (NC(5)H(3)(SH)(CO(2)H)-2,3) was found to produce the 1-dimensional chain structure [Mn(2)((NC(5)H(3)(S)(CO(2))-2,3)(2))(2)(OH(2))(4)].4H(2)O (3) which also exhibits disulfide bridge formation and oxygen-only metal interactions. Compound 3 has been studied by thermogravimetric analysis and indicates sequential loss of lattice and coordinated water, prior to more comprehensive ligand fragmentation at elevated temperatures. The magnetic behaviour of 1 and 3 has been investigated and both exhibit antiferromagnetic interactions. The magnetic behaviour of 1 has been modelled as two corner-sharing isosceles triangles whilst 3 has been modelled as a 1-dimensional chain.     

Relative molecular mass information from aliphatic nitro compounds: A chemical ionization study

The mass spectra of a number of aliphatic nitro compounds have been studied using electron Ionization (EI) and a variety of chemical Ionization (CI) techniques in attempts to obtain relative molecular mass information. The use of positive ion ammonia chemical Ionization techniques gave very satisfactory results, providing abundant [M + NH4]⁺ ions, not only from both primary and secondary nitro compounds, but also from the much more labile tertiary nitro compounds. However, the use of methane and isobutane positive ion CI or EI conditions resulted in facile fragmentation with little relative molecular mass information being made available. Negative ion CI using methane, isobutane or ammonia as moderating gases all gave abundant [M ? 1]^? ions with primary and secondary nitro compounds but at much reduced sensitivity.     

THE PHOTOREACTIVITY OF PYRIMIDINE-PURINE SEQUENCES IN SOME DEOXYDINUCLEOSIDE MONOPHOSPHATES AND ALTERNATING DNA COPOLYMERS

Abstract— A reversed-phase HPLC system has been developed which separates the common nucleo-bases from the 6-methylimidazo[4,5- b ]pyridin-5-one (6-MIP) produced on acid hydrolysis of a thymine-adenine photoadduct (TA*) that is formed between adjacent thymine and adenine bases in UV-irradiated polydeoxyribonucleotides. By measuring the relative amounts of adenine and 6-MIP in acid hydrolysates, this system has been used to investigate how polynucleotide conformation affects the yield of TA* in poly(dA-dT) irradiated at 254 nm. The photoreactivity of other pyrimidine-purine sequences has been examined with the deoxydinucleoside monophosphates d(TpI) and d(m⁵CpA) and with the alternating DNA copolymers poly(dA-dU), poly(dI-dC), poly(dG-dC) and poly(dA-dC).poly(dG-dT). Samples were irradiated at 254 nm in aqueous solution and in ice, and at wavelengths >290 nm with acetone as photosensitizer. A photoproduct resembling TA*, and giving 6-MIP on acid hydrolysis, was isolated from d(TpI) irradiated at 254 nm in solution or in ice; d(m⁵CpA) was comparatively unreactive. Acid hydrolysates of the irradiated DNA copolymers were screened by HPLC and by TLC and paper electrophoresis, for the presence of imidazo[4,5- b ]pyridin-5-one, 6-MIP, or other species attributable to specific photoproduct formation. By this criterion, however, none of the copolymers showed evidence of significant photoreactivity in either their single- or double-stranded conformational states. The formation of mixed pyrimidine-purine photoadducts in DNA is therefore probably restricted to T-A doublets.     

A Sequence-specific Alkali-labile Photolesion Mapping to Adenine in Single-stranded DNA

Abstract— Following UV irradiation at 254 nm and treatment with hot piperidine, single-stranded 49-mer and 12-mer oligodeoxyribonucleotides have been shown by gel-sequencing experiments to contain a prominent alkali-labile cleavage site that maps to adenine in the sequence element 5'-TTGATC-3'. This behavior is abolished by single base substitutions within the photoreactive tract and does not occur with duplex DNA. The distinctive properties of the photolesion are consistent with the formation of an abasic site through initial loss of a photomodified adenine base of unknown structure. The presence of an abasic site is supported by the observations that the alkaline cleavage fragments are terminally phosphorylated and that strand scission can also be effected by spermidine and the tripeptide Lys-Trp-Lys.     

Recent highlights in stationary phase design for open-tubular capillary electrochromatography

This review examines the most recent innovations made to achieve high performance in open-tubular capillary electrochromatography (OT-CEC) separations, focusing on the ingenious chemical and physical solutions made to increase the surface area and equip the stationary phase with exploitable selectivity. Among the approaches taken are chemically bonded ligands, etching with chemical bonding, sol-gels, molecularly imprinted polymers, porous layers, physically attached or adsorbed phases, and nanoparticle coatings. Particularly noteworthy are modern developments with macrocyclic receptor ligands, nanoparticles and open channel electrochromatography on-chip.