Template synthesis in the nickel(II)–thiocarbohydrazide–propanone triple system

The complexing process proceeding in the Ni^II–thiocarbohydrazide (H₂N–H–NC(=S)–NH–NH₂)–propanone triple system in EtOH solution and nickel(II)hexacyanoferrate(II) gelatin-immobilized matrix has been studied. It has been found that in the first case, template synthesis leading, as a minimum, to formation of three coordination compounds of Ni^II with (N,N,S,S)-donor tetradentate ligands having NiL¹, NiL² and NiL³compositions where L¹ is 4,6,6-trimethyl-2,3,7,8-tetraazanonen-3-di(thiohydrazide)-1,9, L² is 4,6,6,12-tetrametyl-1,9-dithio-2,3,7,8,10,11-hexaazatridekadien-3,11-hydrazide-1 and L³ is 2,8,10,10,16-pentamethyl-5,13-dithio-3,4,6,7,11,12,14,15-octaazaheptadekatrien-2,7,15 is observed, whereas in the gelatin-immobilized matrix, a complexing process in the system considered does not occur.     

Qualitative features of the two-dimensional Raman spectrum in liquids

The theory presented earlier [J. Kim and T. Keyes, Phys. Rev. E 66, 051110 (2002)] is analyzed to determine the information available from the two-dimensional Raman spectrum R((5))(t(2),t(1)) in liquids. The known spectra are well represented by the sum of two products of ordinary time correlations predicted by the theory. The shape of R((5)) is related in general to the values of simple same-time averages and concepts amenable to physical intuition. Using standard models for the time correlations entering the theory, specific analytic expressions for the spectrum are obtained depending on two parameters and a time scale, and the behavior of the spectrum is mapped out in the parameter space.     

A Facile Construction of the Quadranoid Skeleton: Application to the Total Synthesis of (+/-)-Suberosenone

A tandem free radical cyclization-rearrangement sequence was designed and executed to produce tricyclo[4.3.2.0(1,5)]undecane 7 from cyclopentene 6A in a single operation. The total synthesis of suberosenone was accomplished from 7.     

Intramolecular Diels-Alder Reactions of Decatrienoates: Remote Stereocontrol and Conformational Activation(1)

The intramolecular Diels-Alder (IMDA) reactions of C(8)-substituted decatrienoates have been studied. The stereospecific formation of 11 via an endo-boat-9 transition state attests to the powerful directing influence of a C(8) substituent in the IMDA of decatrienoate. In addition, the contrasting observations that stereospecific 9 --> 11 occurs at room temperature while the nor-tert-butyl substrate (4a) requires 125 degrees C/5 h reaction conditions and produces a 60:40 mixture of diastereomers provide clear evidence that a bulky C(8) substituent is a powerful conformational activator of the IMDA.     

Correlating second harmonic optical responses of single Ag nanoparticles with morphology

Femtosecond laser excited second harmonic (SH) activity from single Ag nanoparticles is reported. A correlation of SH single-particle measurements with high-resolution imaging of particle morphology by TEM was achieved by creating position markers on an optical and electron transparent substrate (Si3N4 thin film, approximately 100 nm). We compared the SH activity of single Ag nanoparticles (nanospheres versus nanorods) and cluster structures (composed of two or multiple particles, e.g., dimers and trimers). The direct correlation of single-particle structures and SH activity, spectral and power dependence, strongly suggests one-photon resonant driven nonlinear oscillator response mechanism.     

Influence of extended π-conjugation units on carrier mobilities in conducting polymers

Carrier mobilities in thin films of copolymers with repeat units consisting of oligothiophenes bridged by Si atoms are measured over a range of doping levels, where the numbers of thienylenes in the repeat unit are 7, 8, 10, 12, and 14. The mobilities for these polymer films increased with the increase in doping level and the mobility enhancement followed an increasing order of the π-conjugation length. The magnitude of the mobility increase for the Si polymer comprising 14 thiophene units reached ca. 10⁴, implying that this π-conjugation length is almost sufficient to reproduce transport properties of polythiophenes.     

Synthesis of 5,6,8,9,14,14a-hexahydroisoquino[1,2-b][3]benzazepines

Syntheses of 5,6,8,9,14,14a-hexahydroisoquino[1,2-b][3]benzazepine-2,3,11,12-tetrol and related compounds are described. Key steps involve an initial construction of the isoquinoline ring under the Bischler-Napieralski conditions, which is followed by the building of the azepine ring via an intramolecular lactam formation on to the isoquinoline nucleus.     

Use of long-chain alkylamines for preconcentration and determination of traces of molybdenum, tungsten and rhenium by atomic-absorption spectroscopy-II: molybdenum in soils, sediments and natural waters

Molybdenum is extracted as the thiocyanate complex with the quaternary long-chain aliphatic amine Aliquat 336 in chloroform, followed by evaporation of the solvent, dissolution in MIBK, and atomic-absorption spectroscopy. The method is simple, rapid and sensitive, with few interference problems for the determination of the Mo content of soils and sediments in the range 0.1-1.0 ppm with a relative standard deviation better than 5% when 1-g samples are used. Quantitative extraction from large volumes of aqueous solution has also been confirmed, allowing the determination of Mo in natural waters in the ppM range.     

Hydrophilic polymer membranes containing carboxylic groups—I. Acrylic acid—methyl methacrylate—glycidyl methacrylate copolymers

Copolymers of acrylic acid, methyl methacrylate and glycidyl methacrylate have been synthesized and converted into cross-linked hydrophilic membranes by successive treatments with heat, alkali solution and acidic solution. The copolymerization was carried out in solution using tetrahydrofuran and p-dioxane as solvents. The polymer was obtained as a clear viscous solution at yields of approximately 95%. The polymerization was stopped before gelation took place. This gelation resulted from the reaction of epoxy and carboxylic groups of the polymeric chain. The polymerization time ranged from 3.5 to 7 hr depending on the content of the glycidyl methacrylate in the feed. The monomer mixture consisted of 25–45 mol% of acrylic acid, 40–70 mol% of methyl methacrylate and 2.5–15 mol% of glycīdyl methacrylate. With increasing content of acrylic acid, the membranes became soft and elastic; with decreasing content, they became brittle and hydrophobic. The swelling of the cured polymeric film increased with increase in the acrylic acid content of the monomer mixture and decreased with increasing glycidyl methacrylate content. Dialysis runs were conducted with sodium chloride, urea and a series of ethylene glycols with molecular weights up to 600. The permeability coefficients through the membranes for the ethylene glycols were similar to those through a commercial cellulose membrane (Cuprophane). The permeability proportional to $\text{(permeant molecular wt)}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}$. The membranes showed very low permeabilities to sodium chloride compared with those of commercial nonionic membranes. This appears to be due to the ionic exclusion mechanisms expected for ion exchange membranes.