Synthesis of β3‐Homophenylalanine‐Derived Amino Acids and Peptides by Suzuki Coupling in Solution and on Solid Support

β‐Peptides and, to a certain extent, also mixed α,β‐peptides, are resistant to degradation by a variety of proteolytic enzymes that rapidly degrade natural α‐peptides. This is one of many characteristics that make β‐peptides an attractive class of compounds for drug‐discovery studies. On the other hand, modern organometallic reactions such as the Suzuki–Miyaura cross‐coupling have become standard tools in industry laboratories to derivatize side chains of α‐peptidic compounds to build up libraries of unnatural peptides. Combining both features, we prepared (4‐bromo)‐β³‐homophenylalanine derivatives 3 – 5 and 12 as precursors for Suzuki–Miyaura couplings. From these bromo compounds, we synthesized biaryl‐substituted β‐homoamino acids 6 , and analogs 13 and 15 of the anti‐AIDS drug Saquinavir.     

Density fluctuations in amorphous and semicrystalline polymers

Summary The small-angle scattering of amorphous and semicrystalline polymers contains an intensity component due to density fluctuations within the crystalline and amorphous domains.For amorphous polymers, the density fluctuations aboveT _g correspond to the theoretical value for a fluid system in thermodynamic equilibrium. BelowT _g , a temperature dependence proportional to T is observed over a range of about 50°. At lower temperatures, a linear relationship with a smaller slope has been found which extrapolates to a non-zero value at 0 °K. This value corresponds to the frozen-in disorder, the slope at low temperatures is related to thermal vibrations and can be evaluated in terms of photon-phonon scattering.Semicrystalline polymers show a temperature dependence of the density fluctuation similar to that of the amorphous polymers. At constant temperature the density fluctuations vary linearly with crystallinity.Natural rubber shows an increase of the density fluctuations with increasing cross-linking densities from which information on the density changes in the vicinity of a cross-link and on the statistics of the distribution of cross-linking can be obtained.

---

Zusammenfassung Die Kleinwinkelstreuung amorpher und teilkristalliner Polymere besitzt eine Intensitätskomponente, die von Dichtefluktuationen innerhalb der kristallinen und amorphen Bezirke herrührt. Für amorphe Polymere entspricht die Dichtefluktuation oberhalb vonT _g dem theoretischen Wert für ein fluides System im thermodynamischen Gleichgewicht. UnterhalbT _g wird eine Temperaturabhängigkeit proportional zuT über einen Bereich von etwa 50° beobachtet. Bei tieferen Temperaturen wird eine lineare Beziehung mit einer geringeren Steigung gefunden, welche zu einem endlichen Wert bei 0 °K extrapoliert werden kann. Dieser Wert bezieht sich auf die eingefrorene Fehlordnung, die Steigung bei tiefen Temperaturen ist auf thermische Schwingungen zurückzuführen und kann als Photon-Phonon-Streuung ausgewertet werden.Teilkristalline Polymere zeigen eine Temperaturabhängigkeit der Dichtefluktuation, die der von amorphen Polymeren ähnlich ist. Bei konstanter Temperatur ändert sich die Dichtefluktuation linear mit der Kristallinität.Naturkautschuk zeigt eine mit der Vernetzungsdichte ansteigende Dichtefluktuation, aus der man Information über die Dichteänderung in der Umgebung eines Netzpunktes und die Statistik der Netzpunktverteilung erhalten kann.

     

A novel method for the filterless preconcentration of iron

A novel method of analysis of iron by filterless preconcentration is presented. This is the first example of efficient preconcentration of a refractory transition metal where coprecipitation and columns were omitted. The method applies a manifold of flow injection analysis (FIA) to iron species that are preconcentrated on the inner walls of a tubular reactor. It was found that the adsorption of iron species to the walls was particularly pronounced in reactors of nylon material and enrichment factors of 30-35 could be attained, as dependent on the length of the reactor and on the time of preconcentration. In the preconcentration step of the FIA accessory, the optimum efficacy was obtained when the acidity of the samples was adjusted by HCl to pH = 2.5 whereas the ammonia preconcentration buffer should be kept alkaline at pH = 9.8. After being preconcentrated on the tubular reactor, the iron species were eluted by hydrochloric acid and analysed by flame atomic absorption spectrometry (FAAS). An unprecedented low limit of detection (LOD, 3sigma) of 1.8 microg L(-1) was thus obtained for the analysis of iron by FAAS, and the calibration line was linear up to 100 microg L(-1). A high sampling frequency of 40 per hour was obtained and the protocol allowed analysis of small amounts of iron in drinking water, in digested samples and in saline water. The major influence of interferences originated from ligands that are known to complex strongly to iron species. The method thus developed was uncomplicated in operation and it exhibited an excellent long-term stability and a high selectivity. Further, it was environmentally safe owing to production of non-toxic waste disposals. Equally high enrichment factors (EF) were obtained for Fe(ii) and Fe(iii), which is explained by the very low solubility product of both species.     

Application of the method of images on electrostatic phenomena in aqueous Al2O3 and ZrO2 suspensions

A new solution for the Poisson equation for the diffuse part of the double layer around spherical particles will be presented. The numerical results are compared with the solution of the well-known DLVO theory. The range of the diffuse layer differs considerably in the two theories. Also, the inconsistent representation of the surface and diffuse layer charge in the DLVO theory do not occur in the new theory. Experimental zeta potential measurements were used to determine the charge of colloidal Al2O3 and ZrO2 particles. It is shown that the calculated charge can be interpreted as a superposition of independent H+ and OH- adsorption isotherms. The corresponding Langmuir adsorption isotherms are taken to model the zeta potential dependence on pH. In the vicinity of the isoelectric point the model fits well with the experimental data, but at higher ion concentrations considerable deviations occur. The deviations are discussed. Furthermore, the numerical results for the run of the potential in the diffuse part of the double layer were used to determine the electrostatic interaction potential between the particles in correlation with the zeta potential measurements. The corresponding total interaction potentials, including the van der Waals attraction, were taken to calculate the coagulation half-life for a suspension with a particle loading of 2 vol%. It is shown that stability against coagulation is maintained for Al2O3 particles in the pH region between 3.3 and 7 and for ZrO2 only around pH 5. Stability against flocculation can be achieved in the pH regime between 4.5 and 7 for Al2O3, while the examined ZrO2 particles are not stable against flocculation in aqueous suspensions.     

Microcolumns with self-assembled particle frits for proteomics

LC-MS-MS experiments in proteomics are usually performed with packed microcolumns employing frits or outlets smaller than the particle diameter to retain the packing material. We have developed packed microcolumns using self-assembled particles (SAPs) as frits that are smaller than the size of the outlet. A five to one ratio of outlet size to particle diameter appears to be the upper maximum. In these situations the particles assembled into an arch over the outlet like the stones in a stone bridge. When 3 microm particles were packed into a tapered column with an 8 microm outlet, two particles bridged the outlet with 0.3 pl dead volume and perfect success rate. In peptide analysis by LC-MS, the peak width at half height was normally less than 6 s, compared to 12 s without SAPs. The LC-MS-MS system provided 37% sequence coverage (21 matched peptides) for a tryptically-digested sample of 10 fmol bovine serum albumin. We also describe application of the SAP principle to make disposable pipette tip columns with short pieces of fused-silica capillary as the outlet.     

Synthese und Charakterisierung neuer intramolekular stickstoffstabilisierter Organoaluminium‐ und Organogalliumalkoxide

Synthesis and Characterization of New Intramolecularly Nitrogen‐stabilized Organoaluminium‐ and Organogallium Alkoxides The intramolecularly nitrogen stabilized organoaluminium alkoxides [Me₂Al{μ‐O(CH₂)₃NMe₂}]₂ ( 1a ), Me₂AlOC₆H₂(CH₂NMe₂)₃‐2,4,6 ( 2a ), [(S)‐Me₂Al{μ‐OCH₂CH(i‐Pr)NH‐i‐Pr}]₂ ( 3a ) and [(S)‐Me₂Al{μ‐OCH₂CH(i‐Pr)NHCH₂Ph}]₂ ( 4 ) are formed by reacting equimolar amounts of AlMe₃ and Me₂N(CH₂)₃OH, C₆H₂[(CH₂NMe₂)₃‐2,4,6]OH, (S)‐i‐PrNHCH(i‐Pr)CH₂OH, or (S)‐PhCH₂NHCH(i‐Pr)CH₂OH, respectively. An excess of AlMe₃ reacts with Me₂N(CH₂)₂OH, Me₂N(CH₂)₃OH, C₆H₂[(CH₂NMe₂)₃‐2,4,6]OH, and (S)‐i‐PrNHCH(i‐Pr)CH₂OH producing the “pick‐a‐back” complexes [Me₂AlO(CH₂)₂NMe₂](AlMe₃) ( 5 ), [Me₂AlO(CH₂)₃NMe₂](AlMe₃) ( 1b ), [Me₂AlOC₆H₂(CH₂NMe₂)₃‐2,4,6](AlMe₃)₂ ( 2b ), and [(S)‐Me₂AlOCH₂CH(i‐Pr)NH‐i‐Pr](AlMe₃) ( 3b ), respectively. The mixed alkyl‐ or alkenylchloroaluminium alkoxides [Me(Cl)Al{μ‐O(CH₂)₂NMe₂}]₂ ( 6 ) and [{CH₂=C(CH₃)}(Cl)Al{μ‐O(CH₂)₂NMe₂}]₂ ( 8 ) are to obtain from Me₂AlCl and Me₂N(CH₂)₂OH and from [Cl₂Al{μ‐O(CH₂)₂NMe₂}]₂ ( 7 ) and CH₂=C(CH₃)MgBr, respectively. The analogous dimethylgallium alkoxides [Me₂Ga{μ‐O(CH₂)₃NMe₂}]₂ ( 9 ), [(S)‐Me₂Ga{μ‐OCH₂CH(i‐Pr)NH‐i‐Pr}]_n ( 10 ), [(S)‐Me₂Ga{μ‐OCH₂CH(i‐Pr)NHCH₂Ph}]_n ( 11 ), [(S)‐Me₂Ga{μ‐OCH₂CH(i‐Pr)N(Me)CH₂Ph}]_n ( 12 ) and [(S)‐Me₂Ga{μ‐OCH₂(C₄H₇NHCH₂Ph)}]_n ( 13 ) result from the equimolar reactions of GaMe₃ with the corresponding alcohols. The new compounds were characterized by elemental analyses, ¹H‐, ¹³C‐ and ²⁷Al‐NMR spectroscopy, and mass spectrometry. Additionally, the structures of 1a , 1b , 2a , 2b , 3a , 5 , 6 and 8 were determined by single crystal X‐ray diffraction.     

Stereochemical effects in supramolecular self-assembly at surfaces: 1-D versus 2-D enantiomorphic ordering for PVBA and PEBA on Ag(111)

We present investigations on noncovalent bonding and supramolecular self-assembly of two related molecular building blocks at a noble metal surface: 4-[trans-2-(pyrid-4-yl-vinyl)]benzoic acid (PVBA) and 4-[(pyrid-4-yl-ethynyl)]benzoic acid (PEBA). These rigid, rodlike molecules comprising the same complementary moieties for hydrogen bond formation are comparable in shape and size. For PVBA, the ethenylene moiety accounts for two-dimensional (2-D) chirality upon confinement to a surface; PEBA is linear and thus 2-D achiral. Molecular films were deposited on a Ag(111) surface by organic molecular beam epitaxy and characterized by scanning tunneling microscopy. At low temperatures (around 150 K), both species form irregular networks of flat lying molecules linked via their endgroups in a diffusion-limited aggregation process. In the absence of kinetic limitations (adsorption or annealing at room temperature), hydrogen-bonded supramolecular assemblies form which are markedly different. With PVBA, enantiomorphic twin chains in two mirror-symmetric species running along a high-symmetry direction of the substrate lattice form by diastereoselective self-assembly of one enantiomer. The chirality signature is strictly correlated between neighboring twin chains. Enantiopure one-dimensional (1-D) supramolecular nanogratings with tunable periodicity evolve at intermediate coverages, reflecting chiral resolution in micrometer domains. In contrast, PEBA assembles in 2-D hydrogen-bonded islands, which are enantiomorphic because of the orientation of the supramolecular arrangements along low-symmetry directions of the substrate. Thus, for PVBA, chiral molecules form 1-D enantiomorphic supramolecular structures because of mesoscopic resolution of a 2-D chiral species, whereas with PEBA, the packing of an achiral species causes 2-D enantiomorphic arrangements. Model simulations of supramolecular ordering provide a deeper understanding of the stability of these systems.     

Immunosensor for estrone with an equal limit of detection as common analytical methods

Immunoanalytical methods at a very low limit of detection (LOD) and a low limit of quantification (LOQ) are becoming more and more important for environmental analysis and especially for monitoring drinking water quality. Biosensors have suitable characteristics such as efficiency in allowing very fast, sensitive, and cost-effective detection. Here we describe a fully automated immunoassay for estrone with a LOD below 0.20 ng L^–1 and a LOQ below 1.40 ng L^–1. In contrast to common analytical methods such as GC-MS or HPLC-MS, the biosensor used requires no sample pre-treatment and pre-concentration. The basis of our sensitive assay is the antibody with a high affinity constant towards estrone. The very low amount of antibody per sample results in low validation parameters (LOD, LOQ, and IC50), but this assay for estrone represents the current device-related limitation of the River Analyser (RIANA).     

An improved catalyst for the asymmetric arylation of ketone enolates

A new catalyst system for the enantioselective alpha-arylation of ketones is reported. This catalyst, prepared from Pd(2)(dba)(3) and a bulky dialkylphosphino-binaphthyl ligand, is able to effect the asymmetric arylation of ketone enolates with aryl bromides utilizing NaO(t)()Bu as base. These new catalysts enjoy much higher reactivity than previous systems; arylation reactions could be effected at room temperature with only 2 mol % of the Pd catalyst. The coupling of alpha-alkyl-alpha'-protected cyclopentanones proceeded in high yield, and the resulting quaternary stereogenic center was installed in up to 94% ee.