Liposomes as signal amplification reagents for bioassays in microfluidic channels

Liposomes with encapsulated carboxyfluorescein were used in an affinity-based assay to provide signal amplification for small-volume fluorescence measurements. Microfluidic channels were fabricated by imprinting in a plastic substrate material, poly(ethylene terephthalate glycol) (PETG), using a silicon template imprinting tool. Streptavidin was linked to the surface through biotinylated-protein for effective immobilization with minimal nonspecific adsorption of the liposome reagent. Lipids derivatized with biotin were incorporated into the liposome membrane to make the liposomes reactive for affinity assays. Specific binding of the liposomes to microchannel walls, dependence of binding on incubation time, and nonspecific adsorption of the liposome reagent were evaluated. The results of a competitive assay employing liposomes in the microchannels are presented.     

ULTRAVIOLET ACTION SPECTRA FOR PHOTOBIOLOGICAL EFFECTS IN CULTURED HUMAN LENS EPITHELIAL CELLS

Abstract— The action spectrum for cell killing by UV radiation in human lens epithelial (HLE) cells is not known. Here we report the action spectrum in the 297–365 nm region in cultured HLE cells with an extended lifespan (HLE B-3 cells) and define their usefulness as a model system for photobiological studies. Cells were irradiated with monochromatic radiation at 297, 302, 313, 325, 334 and 365 nm. Cell survival was determined using a clonogenic assay. Analysis of survival curves showed that radiation at 297 nm was six times more effective in cell killing than 302 nm radiation; 297 nm radiation was more than 260, 590, 1400 and 3000 times as effective in cell killing as 313, 325, 334 and 365 nm radiation, respectively. The action spectrum was similar in shape to that for other human epithelial cell lines and rabbit lens epithelial cells. The effect of UV radiation on crystallin synthesis was also determined at different wavelengths. To determine whether exposure to UV radiation affects the synthesis of β-crystallin, cells were exposed to sublethal fluences of UV radiation at 302 and 313 nm, labeled with [³⁵S]methionine and the newly synthesized βY-crystallin was analyzed by immunoprecipitation and western blotting using an antibody to β-crystallin. The results show a decrease in crystallin synthesis in HLE cells irradiated at 302 and 313 nm at fluences causing low cytotoxicity. The effect of radiation on membrane perturbation was determined by measuring enhancement of synthesis of prostaglandin E₂ (PGE₂). Synthesis of PGE₂ occurs at all UV wavelengths tested in the 297–365 nm region. The slope of the PGE₂ response curves was higher than that of cell killing curves in cultured HLE cells. These data show that cultured HLE cells with extended lifespan are a suitable system for investigating photobiological responses of cells to UV radiation.     

Light-regulated electrostatic interactions in colloidal suspensions

The net charge of a colloidal particle was controlled using light and a new photocleavable self-assembled monolayer (SAM). The SAM contained a terminal ammonium group and a centrally located carboxylic acid group that was masked with an ortho-nitrobenzyl functionality. Once exposed to UV light, the 2-nitrobenzyl group was cleaved, therefore transforming the colloidal particle from a net positive (silica-SAM-NH3+) to a net negative (silica-SAM-COO-) charge. By varying the UV exposure time, their zeta potential could be tailored between +26 and -60 mV at neutral pH. To demonstrate a photoinduced gel-to-fluid phase transition, a binary colloidal suspension composed of silica-SAM-NH3+ and negatively charged, rhodamine-labeled silica particles was mixed to form a gel. Exposure to UV light rendered all of the particles negative and therefore converted the system into a colloidal fluid that settles to form a dense sediment.     

Polymerization of pyromellitic dianhydride with 3,3′-diaminobenzidine in aprotic solvents I. Reaction variables

The solution polymerization of pyromellitic dianhydride with 3,3′-diaminobenzidine to form poly(amide acid amine) was investigated under a variety of reaction conditions. Polymer viscosity and gel formation were highly affected by changes in the order of monomer addition, the type of process (powder or solution), monomer concentration, monomer stoichiometry, and type of solvent. Minor effects were noted with changes in polymerization temperature and the presence of small amounts of water. A limiting intrinsic viscosity of 1.2–1.5 dl/g was observed, regardless of polymerization conditions. The polymerization had a strong tendency to gel at high concentrations and when monomer molar ratios approached 1:1. The conditions which retarded or promoted the formation of macrogel were well-defined, and macrogel but not microgel could be prevented. The polymerization was conducted successfully only in aprotic solvents. No imidazopyrrol-one units were detected in polymer made in polyphosphoric acid at elevated temperatures.     

Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles

Stress development during drying of coatings produced from aqueous dispersions of calcium carbonate particles in the presence and absence of organic binders was studied using a controlled-environment stress apparatus that simultaneously monitored drying stress, weight loss, and relative humidity. Specifically, the influence of two organic binders on drying stress evolution was investigated: (1) carboxymethylcellulose, a water-soluble viscosifying aid, and (2) a styrene-butadiene latex emulsion of varying glass transition temperature. The stress histories exhibited three distinct regions. First, a period of stress rise was observed, which reflected the capillary tension exerted by the liquid on the particle network. Second, a maximum stress was observed. Third, it was followed by a period of either stress decay or rise depending on the organic species present. Significant differences in stress histories were observed between coatings containing soluble and nonsoluble binders. Maximum drying stresses (sigmamax) of 0.2-0.5 MPa were observed for coatings produced from pure calcium carbonate or calcium carbonate-latex suspensions, whereas coatings with carboxymethylcellulose exhibited substantially higher sigmamax values of 1-2 MPa. Upon drying, these coatings were quite hygroscopic, such that cyclic variations in relative humidity induced large cyclic changes in residual stress.     

Nickel oxidation states of F(430) cofactor in methyl-coenzyme M reductase

Magnetic circular dichroism (MCD) spectroscopy and variable-temperature variable-field MCD are used in combination with density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations to characterize the so-called ox1-silent, red1, and ox1 forms of the Ni-containing cofactor F430 in methyl-coenzyme M reductase (MCR). Previous studies concluded that the ox1 state, which is the precursor of the key reactive red1 state of MCR, is a Ni(I) species that derives from one-electron reduction of the Ni(II)-containing ox1-silent state. However, our absorption and MCD data provide compelling evidence that ox1 is actually a Ni(II) species. In support of this proposal, our DFT and TD-DFT calculations indicate that addition of an electron to the ox1-silent state leads to formation of a hydrocorphin anion radical rather than a Ni(I) center. These results and biochemical evidence suggest that ox1 is more oxidized than red1, which prompted us to test a new model for ox1 in which the ox1-silent species is oxidized by one electron to form a thiyl radical derived from coenzyme M that couples antiferromagnetically to the Ni(II) ion. This alternative ox1 model, formally corresponding to a Ni(III)/thiolate resonance form but with predicted S = 1/2 EPR parameters reminiscent of a Ni(I) (3dx2-y2)1 species, rationalizes the requirement for reduction of ox1 to yield the red1 species and the seemingly incongruent EPR and electronic spectra of the ox1 state.     

Thermal degradation of bromine-containing polymers. Part 2—Characteristics and products of degradation of copolymers of 2-bromoethyl methacrylate and methyl acrylate

Reactivity ratios for the system 2-bromoethyl methacrylate (M₁)/methyl acrylate (M₂) have been obtained as follows using a nuclear magnetic resonance spectroscopic technique: r₁ = 2·77 ± 0·03, r₂ = 0·19 ± 0·02. The principal characteristics of the thermal degradation of this copolymer system have been established by the application of Thermal Gravimetry, Differential Scanning Calorimetry, Thermal Volatilisation Analysis and Sub-ambient Thermal Volatilisation Analysis, the products being identified principally by infra-red and NMR spectroscopic analysis. A quantitative analysis of the products of degradation is presented.     

Further solvent-free reactions of ferrocenylaldehydes: Synthesis of 1,1′-ferrocenyldiimines and ferrocenylacrylonitriles

Grinding of 1,1′-ferrocenedicarboxaldehyde with a 2.2 molar equivalent of an aromatic amine in a solvent-free environment provided excellent yields of 1,1′-ferrocenyldiimines. After mixing the aldehyde and amines, a gum or melt formed which eventually solidified to the product. An analytically pure sample of the product was obtained by cold recrystallization. Grinding of ferrocenecarboxaldehyde and 4-substituted phenylacetonitriles under solvent-free conditions provided good yields of the corresponding ferrocenylacrylonitriles. The yield in this reaction was very low when the substituent group para to the acetonitrile group was electron-donating.