Retardation characteristics and birefringence of a multiple-order crystalline quartz plate

A crystalline quartz plate of thickness 1.070 mm is calibrated between 370 and 794 nm. Throughout this spectral interval, the retardance varied by 32π and the plate introduced quarterwave retardance 16 times at different wavelengths. The birefringence (n_e−n_o) of crystalline quartz was calculated as a single quantity and varied from 0.00971 at 370 nm to 0.00891 at 794 nm. All measurements were carried out at 23°C.     

Performance of a CW pumped Nd:YVO4 amplifier with kHz pulses

Until recently, simple and reliable high repetition-rate laser sources with nanosecond pulses much shorter than from conventional A-O Q-switch lasers were not available. However over the past 2 years we have developed such lasers based on proprietary fast E-O switching technology, which allows designs delivering 1 ns pulses and subnanosecond jitter for good synchronisation. The technology provides pulses with multi-kW peak power and repetition-rates to >100 kHz.Most recently, the performance of these short pulse lasers has been developed further by implementing oscillator/amplifier (master oscillator and power amplifier, MOPA) technology which increases the output to >1 W average power. Here we report on a simple model that has been used to predict the performance of the CW pumped Nd:YVO₄ amplifier used in the MOPA laser. The model is based on the well-known expressions for the saturated gain applying to laser pulses, but more usually applied to pulse-excited amplifiers. The model is shown to allow a good interpretation of the amplifier behaviour for kHz pulses and to be a useful tool for predicting the performance of the MOPA laser.     

Composite polymeric electrolytes based on PMMA-LiCF3SO3-SiO2

Preliminary results on the mechanical, optical and electrical properties of composite gel electrolytes (CGEs) with fumed silica (SiO₂) as a filler added to gel polymeric electrolyte (GPE) based on PMMA, LiCF₃SO₃ and PC are presented in this paper. Added fumed silica is seen to enhance the mechanical properties of the GPE without changing the conductivity significantly. The high ionic conductivity (×10⁻³ S/cm), high transmission in the visible region and nominal variance of conductivity and viscosity over a wide temperature window show that these CGEs are potential electrolytes for electrochromic windows (ECWs).     

Hutchinson's shear coefficient for anisotropic beams

Timoshenko's theory of vibrating beams requires a shear correction factor to correctly take into account the effects of shear deformation for different beam cross-sections. This correction is crucial for a precise determination of the shear modulus from the resonant frequencies. Hutchinson's beam theory is used to derive a new shear correction coefficient for anisotropic materials. A comparison is made with other shear coefficients for anisotropic materials published in the literature. Computer-simulated spectra are used to validate the new anisotropic shear correction coefficient.     

The action of an electron beam on dust structures in a plasma

The action of an electron beam on ordered dust structures in glow and low-pressure RF discharges was studied experimentally. The electron beam produces destruction and dynamic displacement of the dust structure. In the center of a dust structure, an electron beam with a low electron energy (tens of eV) at currents up to 1 mA caused structural disordering and “melting” in the region of its action but did not excite external crystal regions. Local action of an electron beam with a high electron energy (25 keV) and a beam current above 10 mA caused deformation of the whole dust structure and shifted it in the horizontal direction so that it was carried away from the RF discharge zone. The effect of dust structure displacements can be used to locally remove particles from a plasma.     

Dynamic interaction of plasma flow with the hot boundary layer of a geomagnetic trap

The study of the interaction between collisionless plasma flow and stagnant plasma revealed the presence of an outer boundary layer at the border of a geomagnetic trap, where the super-Alfvén subsonic laminar flow changes over to the dynamic regime characterized by the formation of accelerated magnetosonic jets and decelerated Alfvén flows with characteristic relaxation times of 10–20 min. The nonlinear interaction of fluctuations in the initial flow with the waves reflected from an obstacle explains the observed flow chaotization. The Cherenkov resonance of the magnetosonic jet with the fluctuation beats between the boundary layer and the incoming flow is the possible mechanism of its formation. In the flow reference system, the incoming particles are accelerated by the electric fields at the border of boundary layer that arise self-consistently as a result of the preceding wave-particle interactions; the inertial drift of the incoming ions in a transverse electric field increasing toward the border explains quantitatively the observed ion acceleration. The magnetosonic jets may carry away downstream up to a half of the unperturbed flow momentum, and their dynamic pressure is an order of magnitude higher than the magnetic pressure at the obstacle border. The appearance of nonequilibrium jets and the boundary-layer fluctuations are synchronized by the magnetosonic oscillations of the incoming flow at frequencies of 1–2 mHz.     

The use of an ultrasonic Doppler velocimeter in turbulent pipe flow

An ultrasonic Doppler velocimeter (UDV) is used for an experimental investigation of turbulent pipe flow at eight different Reynolds numbers (22,300–854,900). The UDV is a multipoint probe in the sense that it takes instantaneous measurements of fluid velocities at different locations simultaneously, with remarkable resolutions in space and time. The performances of the instrument with respect to the properties of the overlap layer of the turbulent flow field are investigated; the experimental results are compared with both already existing and more recently proposed scaling laws, and with other data of experimental nature.     

Crossover from high-temperature vortex-liquid to low-temperature vortex-glass behavior in single phase HgBa2Ca2Cu3O8+δ superconductor

The ρ-T curves in our single phase HgBa₂Ca₂Cu₃O_8+δ superconductor were measured as a function of temperature and magnetic field, ρ=ρ₀exp(−U_eff/κ_BT). It can be transformed to another form d(lnρ)/d(1/T)=−U_eff+TdU_eff/dT, then this becomes a plot of the activation energy U_eff as a function of temperature. Our data plotted in these ways show a clear crossover from high-temperature two-dimensional vortex-liquid to a critical region associated with the low-temperature three-dimensional vortex-glass phase transition. The critical exponents v(z−1)=3.9±1.9 in this system are little different with previous measurements in BSCCO and YBCO systems.