Photocyclisation d'hydroxyalkyl glycosides en orthoesters glycosidiques

A free-radical cyclization process makes glycosidic orthoester structures readily available in a one-pot procedure.     

Structures de deux β-énaminoesters cycliques: l'α-(tétrahydropyrrolidinylidéne-2) acétate d'éthyle et l'α-(hexahydroazepinylidéne-2) acétate d'éthyle

The structure of ethyl α-(tetrahydro-2-pyrrolidinylidene) and α-(hexahydro-2-azepinylidene) acetates has been determined from the X-ray crystallographic analysis. The results show that, in a solid state, these compounds exist as β-enaminoesters which have a Z configuration. They also show the presence of intra and intermolecular hydrogen bonding.     

Reduced number of steps for the synthesis of dense and highly functionalized dendrimers

A series of densely functionalized dendrimers is synthesized using two branched monomers of type AB₂ and CD₂, in which the A function (NH₂) reacts with D (CHO) and the B function (Cl) reacts with C (OH). The reaction has been carried out up to the fourth generation possessing 96 end groups and has been obtained in only four steps.     

Photomagnetic properties of an iron(II) low-spin complex with an unusually long-lived metastable LIESST state

A comprehensive study of the photomagnetic behavior of the [Fe(L222N5)(CN)2].H2O complex has been carried out. This complex is characterized by a low-spin (LS) iron(II)-metal center up to 400 K and exhibits at 10 K the well-known Light-Induced Excited Spin State Trapping (LIESST) effect. The critical LIESST temperature (T(LIESST)) has been measured to be 105 K. The kinetics of the transition from the metastable high-spin (HS) state to the low-spin state have been determined and used for reproducing the experimental T(LIESST) curve. This study represents a second example of a fully low-spin iron(II)-metal complex up to 400 K, which can be photoexcited at low temperature with an atypical long-lived metastable HS state. This underlines the preponderant role of the inner coordination sphere for stabilizing the lifetime of the photoinduced HS state.     

Efficient synthesis of trisubstituted alkenes in an aqueous-organic system using a versatile and recyclable Rh/m-TPPTC catalyst

We have found that the use of [Rh(cod)OH]₂ associated with the water-soluble ligand m-TPPTC was highly efficient for the Rh-catalyzed arylation of alkynes. Aryl and alkyl alkynes were transformed to alkenes using 3 mol % rhodium catalyst and 2.5 equiv of boronic acid at 100 °C in a biphasic water/toluene system in 80-99% yield. The reaction was found to be totally regioselective for alkyl arylalkynes and alkyl silylated alkynes. The Rh/m-TPPTC system was for the first time recycled with no loss of the activity and with excellent purity of the desired alkene.     

Unprecedented (Cu2Ln)n complexes (Ln = Gd3+, Tb3+): a new "single chain magnet"

The magnetic study of a trinuclear Cu-Gd-Cu complex confirms that such basic units self-assemble to yield a high spin species. A nice fit of the magnetic data is obtained for an infinite chain of tetranuclear Gd(2)Cu(2) motifs linked through the Gd ions located at the opposite vertexes of the tetranuclear motifs according to two Cu-Gd coordination modes, a double bridging through phenoxo and alkoxo oxygen atoms and a single bridging through deprotonated amide functions. The two interaction pathways are ferromagnetic. Alternating current susceptibility measurements confirm that the equivalent copper-terbium entity is a single chain magnet with a barrier height for reversal of the magnetization equal to 28.5 K.     

Underpotential deposition of hydrogen on benzene-modified Pt(111) in aqueous H2SO4

The Pt(111) electrode is modified by an overlayer of C6H6 (ads) upon its cycling in the 0.05-0.80 V range in aq H2SO4 + 1 mM C6H6. The C6H6 (ads) overlayer significantly changes the underpotential-deposited H (H(UPD)) and anion adsorption, and cyclic-voltammetry (CV) profiles show a sharp cathodic peak and an asymmetric anodic one in the 0.05-0.80 V potential range. The C6H6 (ads) layer blocks the (bi)sulfate adsorption but facilitates the adsorption of one monolayer of H(UPD). Cycling of the benzene-modified Pt(111) in benzene-free aq 0.05 H2SO4 from 0.05 to 0.80 V results in a partial desorption of C6H6 (ads) and in a partial recovery of the CV profile characteristic of an unmodified Pt(111). The peak potential of the cathodic and anodic feature is independent of the scan rate, s (10 < or = s < or = 100 mV s(-1)), and the peak current density increases linearly with an increase of the scan rate. Temperature variation modifies the peak potential and current density but does not affect the charge density of the cathodic or anodic feature. Temperature-dependent studies allow us to determine the thermodynamic state function for the H(UPD) adsorption and desorption. Delta G degrees(ads)(H(UPD))assumes values from -4 to -12 kJ mol(-1), while has values from 9 to 14 kJ mol(-1). The values of delta Delta G degrees (delta Delta G degrees = delat Delta G degrees(ads) + delta Delta D degrees(des)) decrease almost linearly from 6 kJ mol(-1) at theta(H(UPD) --> 0 to 0 kJ mol(-1) at theta(H(UPD) --> 1. The nonzero values of delta Delta G degrees testify that the adsorbing and desorbing H(UPD) adatoms interact with an energetically different substrate. The lateral interactions changed from repulsive (omega = 29 kJ mol(-1) at theta(H(UPD) --> 0) to attractive (omega = -28 kJ mol(-1) at theta(H(UPD) --> 1) as the H(UPD) coverage increases. The values of delta S degrees(ads)(H(UPD)) increase from 19 to 56 J K(-1) mol(-1), while those of delta S degrees(des)(H(UPD)) decrease from 45 to -30 J K(-1) mol(-1) with an increase of H(UPD) coverage. The values of delta H degrees(des)(H(UPD)) and delta H degrees(des)(H(UPD)) vary from 0 to 27 kJ mol(-1). The Pt(111)-H(UPD) surface bond energy at the benzene-modified Pt(111) electrode falls in the 191-218 kJ mol(-1) range and is weaker than in the case of the unmodified Pt(111) electrode in the same electrolyte.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Templated‐Assembly of CsPbBr3 Perovskite Nanocrystals into 2D Photonic Supercrystals with Amplified Spontaneous Emission

Perovskite nanocrystals (NCs) have revolutionized optoelectronic devices because of their versatile optical properties. However, controlling and extending these functionalities often requires a light‐management strategy involving additional processing steps. Herein, we introduce a simple approach to shape perovskite nanocrystals (NC) into photonic architectures that provide light management by directly shaping the active material. Pre‐patterned polydimethylsiloxane (PDMS) templates are used for the template‐induced self‐assembly of 10 nm CsPbBr₃ perovskite NC colloids into large area (1 cm²) 2D photonic crystals with tunable lattice spacing, ranging from 400 nm up to several microns. The photonic crystal arrangement facilitates efficient light coupling to the nanocrystal layer, thereby increasing the electric field intensity within the perovskite film. As a result, CsPbBr₃ 2D photonic crystals show amplified spontaneous emission (ASE) under lower optical excitation fluences in the near‐IR, in contrast to equivalent flat NC films prepared using the same colloidal ink. This improvement is attributed to the enhanced multi‐photon absorption caused by light trapping in the photonic crystal.     

Probing the Brønsted Acidity of the External Surface of Faujasite-Type Zeolites

We outline two methodologies to selectively characterize the Brønsted acidity of the external surface of FAU-type zeolites by IR and NMR spectroscopy of adsorbed basic probe molecules. The challenge and goal are to develop reliable and quantitative IR and NMR methodologies to investigate the accessibility of acidic sites in the large pore FAU-type zeolite Y and its mesoporous derivatives often referred to as ultra-stable Y (USY). The accessibility of their Brønsted acid sites to probe molecules (n-alkylamines, n-alkylpyridines, n-alkylphosphine- and phenylphosphine-oxides) of different molecular sizes is quantitatively monitored either by IR or ³¹P NMR spectroscopy. It is now possible, for the first time to quantitatively discriminate between the Brønsted acidity located in the microporosity and on the external surface of large pore zeolites. For instance, the number of external acid sites on a Y (LZY-64) zeolite represents 2 % of its total acid sites while that of a USY (CBV760) represents 4 % while the latter has a much lower framework Si/Al ratio.