High stability silver nanoparticles–graphene/poly(ionic liquid)-based chemoresistive sensors for volatile organic compounds’ detection

Hybrids of silver nanoparticle-decorated reduced graphene oxide (Ag-RGO) have been prepared with the use of poly(ionic liquid) (PIL) as a versatile capping agent to develop volatile organic compound (VOC) sensors. The hybrid materials of Ag-RGO/PIL were assembled into three-dimensional-laminated nanostructures, where spherical Ag nanoparticles with diameters between 50 and 300 nm were homogeneously distributed on the graphene sheets and interspaced between them. Ag-RGO/PIL sensors were fabricated by spray layer-by-layer technique and used to detect a set of polar (methanol, ethanol, methyl acetate, acetone and water) and non-polar (chloroform, dichlorobenzene, toluene and styrene) organic vapours. Much higher sensitivity and discriminability were obtained for polar vapours although non-polar ones could also be detected. In comparison with either simple reduced graphene oxide or carbon nanotubes (CNT) functionalised by PIL, the hybrid Ag-RGO/PIL-based sensors showed superior performances in terms of sensitivity, selectivity, stability and high reliability. For example, a signal-to-noise ratio up to 168 was obtained for 1 ppm of methanol and signals drift between two experiments spaced out in the time of 3 months was less than 3 %. It is expected that by extrapolation, a limit of detection at the parts per billion level can be reached. These results are promising to design e-noses based on high stability chemoresistive sensors for emerging applications such as anticipated diagnostic of food degradation or diseases by the analysis of VOC, some of them being in this case considered as biomarkers.     

Rheological analysis of highly concentrated w/o emulsions

A series of highly concentrated lipophilic cosmetic emulsions were analysed, in order to determine their rheological and textural properties, as a function of their microstructure. The originality of this study lies in the methodology used, especially the shear-stress scanning analysis. The results of a very powerful and comprehensive dynamic rheological analysis suggest the existence of two critical volume fraction values: besides the “close-packed” value φ _c , a “slack-packed” value φ₀, close to 0.60 could be demonstrated. It has been shown that the close-packed structure is stable under shear; in constrast, the slack-packed configuration, defined as φ₀<φ<φ _c is unstable under shear. A comparison with theoretical models, especially that of Princen, showed good agreement and allowed the close-packed value φ _c to be defined more precisely as 0.67. The gap between 0.67 and 0.74 is probably indicative of a highly polydisperse distribution, as confirmed by microscopic analysis. Flow experiments confirmed the validity of Princen‘s model. Received: 20 February 1997 Accepted: 20 January 1998     

Mössbauer analysis of coal coke samples from Samacá, Boyacá, Colombia

Three samples of coke produced from coal from a mine in the municipality of Samacá, department of Boyacá, Colombia, were studied essentially with Mössbauer spectroscopy. The samples were treated with NaOH 5 mol L^???1 in order to increase the proportion of iron oxides, by selectively dissolving silicate minerals and any remaining gibbsite, before the physical analysis. Room temperature Mössbauer data revealed that all samples do contain major proportions (>50 % of the relative subspectral area) of hematite along with (super) paramagnetic species as iron-bearing chemical compounds. The superparamagnetic contribution may be due to very fine grains of iron oxides, including nanometric hematite.     

g factor of hydrogenlike ²⁸Si¹³⁺

We determined the experimental value of the g factor of the electron bound in hydrogenlike 2?Si13? by using a single ion confined in a cylindrical Penning trap. From the ratio of the ion's cyclotron frequency and the induced spin flip frequency, we obtain g = 1.995 348 958 7(5)(3)(8). It is in excellent agreement with the state-of-the-art theoretical value of 1.995 348 958 0(17), which includes QED contributions up to the two-loop level of the order of (Zα)2 and (Zα)? and represents a stringent test of bound-state quantum electrodynamics calculations.     

Arrest of self-focusing collapse in femtosecond air filaments: higher order Kerr or plasma defocusing?

Experimentally measured conical emission rings on the blue side of the filament supercontinuum of a 800 nm 50 fs pulse in air are reproduced in simulations with plasma and the third-order Kerr as the nonlinear terms. This agreement indicates plasma as the dominant mechanism arresting the self-focusing collapse. The higher order Kerr terms with the recently measured coefficients stop the collapse at a lower intensity than the plasma does and lead to the spherical angle-wavelength spectrum without blueshifted rings.     

New Trends in Magnetic Exchange Bias

The study of layered magnetic structures is one of the hottest topics in magnetism due to the growing attraction of applications in magnetic sensors and magnetic storage media, such as random access memory. For almost half a century, new discoveries have driven researchers to re-investigate magnetism in thin film structures. Phenomena such as giant magnetoresistance, tunneling magnetoresistance, exchange bias and interlayer exchange coupling led to new ideas to construct devices, based not only on semiconductors but on a variety of magnetic materials Upon cooling fine cobalt particles in a magnetic field through the Néel temperature of their outer antiferromagnetic oxide layer, Meiklejohn and Bean discovered exchange bias in 1956. The exchange bias effect through which an antiferromagnetic AF layer can cause an adjacent ferromagnetic F layer to develop a preferred direction of magnetization, is widely used in magnetoelectronics technology to pin the magnetization of a device reference layer in a desired direction. However, the origin and effects due to exchange interaction across the interface between antiferromagneic and ferromagnetic layers are still debated after about fifty years of research, due to the extreme difficulty associated with the determination of the magnetic interfacial structure in F/AF bilayers. Indeed, in an AF/F bilayer system, the AF layer acts as “the invisible man” during conventional magnetic measurements and the presence of the exchange coupling is evidenced indirectly through the unusual behavior of the adjacent F layer. Basically, the coercive field of the F layer increases in contact with the AF and, in some cases, its hysteresis loop is shifted by an amount called exchange bias field. Thus, AF/F exchange coupling generates a new source of anisotropy in the F layer. This induced anisotropy strongly depends on basic features such as the magnetocrystalline anisotropy, crystallographic and spin structures, defects, domain patterns etc of the constituant layers. The spirit of this topical issue is, for the first time, to gather and survey recent and original developments, both experimental and theoretical, which bring new insights into the physics of exchange bias. It has been planned in relation with an international workshop exclusively devoted to exchange bias, namely IWEBMN’04 (International Workshop on Exchange Bias in Magnetic Nanostructures) that took place in Anglet, in the south west of France, from 16th to 18th September 2004. The conference gathered worldwide researchers in the area, both experimentalists and theoreticians. Several research paths are particularly active in the field of magnetic exchange coupling. The conference, as well as this topical issue, which was also open to contributions from scientists not participating in the conference, has been organized according to the following principles: 1. Epitaxial systems: Since the essential behavior of exchange bias critically depends on the atomic-level chemical and spin structure at the interface between the ferromagnetic and antiferromagnetic components, epitaxial AF/F systems in which the quality of the interface and the crystalline coherence are optimized and well known are ideal candidates for a better understanding of the underlying physics of exchange bias. The dependence of exchange bias on the spin configurations at the interfaces can be accomplished by selecting different crystallographic orientations. The role of interface roughness can also be understood from thin-film systems by changing the growth parameters, and correlations between the interface structure and exchange bias can be made, as reported in this issue. 2. Out-of-plane magnetized systems: While much important work has been devoted to the study of structures with in-plane magnetization, little has been done on the study of exchange bias and exchange coupling in samples with out-of-plane magnetization. Some systems can exhibit either in-plane or out-of-plane exchange bias, depending on the field cooling direction. This is of particular interest since it allows probing of the three-dimensional spin structure of the AF layer. The interface magnetic configuration is extremely important in the perpendicular geometry, as the short-range exchange coupling competes with a long-range dipolar interaction; the induced uniaxial anisotropy must overcome the demagnetization energy to establish perpendicular anisotropy films. Those new studies are of primary importance for the magnetic media industry as perpendicular recording exhibits potential for strongly increased storage densities. 3. Parameters tuning exchange bias in polycrystalline samples and magnetic configurations: Different parameters can be used to tune the exchange bias coupling in polycrystalline samples similar to those used in devices. Particularly fascinating aspects are the questions of the appearance of exchange bias or coercivity in ferromagnet/antiferromagnet heterostructures, and its relation to magnetic configurations formed on either side of the interface. Several papers report on either growth choices or post preparation treatments that enable tuning of the exchange bias in bilayers. The additional complexity and novel features of the exchange coupled interface make the problem particularly rich. 4. Dynamics and magnetization reversal: Linear response experiments, such as ferromagnetic resonance, have been used with great success to identify interface, surface anisotropies and interlayer exchange in multilayer systems. The exchange bias structure is particularly well suited to study because interface driven changes in the spin wave frequencies in the ferromagnet can be readily related to interlayer exchange and anisotropy parameters associated with the antiferromagnet. Because the exchange bias is intimately connected with details of the magnetization process during reversal and the subsequent formation of hysteresis, considerations of time dependence and irreversible processes are also relevant. Thermal processes like the training effect manifesting itself in changes in the hysteretic characteristics depending on magnetic history can lead to changes in the magnetic configurations. This section contains an increasing number of investigations of dynamics in exchange bias coupled bilayers, and in particular those of the intriguing asymmetric magnetization reversal in both branches of a hysteresis loop. The Editors of the topical issue: Alexandra Mougin Laboratoire de Physique des Solides, UMR CNRS 8502, Université Paris Sud, F-91405 Orsay, France Stéphane Mangin Laboratoire de Physique des Matériaux, UMR CNRS 7556, Université Henri Poincaré, F-54506 Nancy, France Jean-Francois Bobo Laboratoire de Physique de la Matière Condensée - NMH, FRE 2686 CNRS ONERA, 2 avenue Edouard Belin, F-31400 Toulouse, France Alois Loidl Experimentalphysik V, EKM, Institut für Physik, Universität Augsburg, Universitätsstrasse 1, D-86135, Augsburg, Germany     

Etude des aldimines lithiees : I. Synthese d'aldehydes ω-halogenes et de dialdehydes

Aldimines are conveniently metallated, at a position α to the functional group, by using very powerful bases i.e. activated lithium dialkylamides generated in situ from lithium and a secondary amine in benzene/hexamethylphosphoric triamide. The anions obtained are alkylated with various ω,ω′-dihalogenoalkanes to give, after aqueous acid hydrolysis, good yields of ω-halogenated aldehydes and dialdehydes.     

Towards minimization of chlorinated solvents consume in Fourier transform infrared spectroscopy determination of Propamocarb in pesticide formulations

A method has been developed for Fourier transform infrared (FTIR) spectroscopy determination of Propamocarb in emulsifiable pesticide concentrate formulations. Five microliter sample was directly injected without any pretreatment in a CHCl3 stream at 2 mL min(-1) into a closed system and the FTIR spectra of sample and standard solutions were obtained using a nominal resolution of 4 cm(-1) from 4000 to 900 cm(-1) spectral region and accumulating 2 scans per spectrum. Propamocarb determination was based on the measurement of flow injection analysis (FIA) recording height established from FTIR peak area measurements from 1713 to 1703 cm(-1) corrected using a baseline defined at 2000 cm(-1). The concentration of Propamocarb in samples was calculated by interpolation in an external calibration line obtained from several injections of 2 microL of a 47% (w/v) standard solution into the CHCl3 closed system. This procedure provided a limit of detection of 0.8% (w/v) in the original sample, a sensitivity of 0.3190 absorbance units mL mg(-1) for a path length of 0.11 mm and a relative standard deviation of 0.2% for five independent measurements at 0.74 mg mL(-1) concentration level. The maximum sampling frequency of the whole procedure was 34 h(-1) and the waste generation was reduced to only 2 mL of CHCl3 solution per sample and additional 2 mL for the whole calibration line.     

On-line gel permeation chromatography-attenuated total reflectance-Fourier transform infrared determination of lecithin and soybean oil in dietary supplements

Gel permeation chromatography (GPC) with attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectrometry detection has been proposed for the simultaneous determination of lecithin and soybean oil in dietary supplements. The method involves the extraction of analytes with dichloromethane in an ultrasound water bath and the injection of 2 ml of centrifuged and filtered extracts into the system integrated by two Envirogel GPC columns (19 mm x150 mm, 19 mm x 300 mm) coupled on-line. Dichloromethane was used as mobile phase. A method has been developed to select the most appropriated wavenumber to be used for the determination of each considered compound from the calculation of a factor which maximizes the analyte signal minimizing the interferent contributions, being selected the detection wavenumbers of 1034 and 1138 cm(-1) for lecithin and soybean oil, respectively in the first order derivative ATR-FTIR spectra. The method provides limits of detection of 2 and 4 mg ml(-1) for lecithin and soybean oil and repeatability values, measured as relative standard deviation, of 2.5% and 3.4% being extended the linear range till 100 mg ml(-1) for lecithin and up to 50 mg ml(-1) for soybean oil. Accurate results were found for 10 synthetic samples and 7 commercial dietary supplement preparations.