Cyclocopolymerization of dicyclic dienes and maleic anhydride to fused ring systems

The cyclocopolymerization of maleic anhydride and four 1,5- and 1,6-dienes (bicyclopentene, bicyclohexene, dicyclopentenyl ether, and dicyclohexenyl ether) and one tetraene (quartercyclopentene) is described. Soluble, low molecular weight copolymers were obtained from all five compounds. Their compositions approach 2:1 copolymer ratios. Fused ring structures are proposed as the main repeating units. Among the compounds listed, bicyclopentene copolymerized most easily and gave good conversions for monomer ratios of 2:1. Quartercyclopentene and dicyclopentyl ether, the other five-membered ring compounds, also polymerized to good-to-fair yields. However, a monomer ratio of about 4:1 was required to obtain conversions comparable to a 2:1 maleic anhydride—bicyclopentene polymerization. The six-membered systems, bicyclopentene and dicyclopentenyl ether, gave consistently low conversions, even with a 4:1 monomer ratio. The influence of the initiator system, initiator concentration, and reaction medium was studied on copolymerizations of bicyclopentene. Best results were obtained in acetic anhydride with azobisisobutyronitrile as the initiator.     

Dipolar relaxations in an epoxy-amine system

Dipolar relaxations in a reactive epoxy-amine system based on diglycidyl ether of bisphenol A with 4,4^′-diaminodiphenylsulfone were studied with the Havriliak-Negami function. The system was cured isothermally at 140 °C using simultaneous kinetic and microdielectric studies.The relaxation time was calculated from the frequency f_max of the peak of the loss factor ε^′′ versus frequency f. A linear relation exists between the logarithm of the relaxation time τ and the glass transition temperature T_g. Then, logτ follows the Di Benedetto equation revisited by Pascault and Williams allowing the prediction of the relaxation time τ during cure.The unrelaxed permittivity at high frequency ε_u, the relaxed or static permittivity ε_s and the skewness parameter β were found independent on the conversion or the curing time. The distribution parameter α decreases as curing time t increases. The difficulty of orientation of dipoles in the electric field due to vitrification is responsible of these behaviours.     

Spectrométrie de Masse—IV: Fragmentation des Dicétones—ϵ

The mass spectra of ten symmetrical ?-diketones are reported and a number of fragmentation patterns are documented by deuterium labelling experiments. The McLafferty rearrangement involving one of the carbonyl groups is not an important fragmentation pathway although such a double rearrangement is observed for long-chained ?-diketones. Special attention has been given to the ions resulting from the loss of either a molecule of water or the neutral species C₂H₄ which may involve an electron-impact induced formation of cyclobutanol-type ions analogous to the photochemical Yang's reaction.     

Oligothienylenevinylenes incorporating 3,4-ethylenedioxythiophene (EDOT) units

A new series of π-conjugated oligomers based on various combinations of thiophene and EDOT units and double bonds has been synthesized by Wittig-Horner reactions from phosphonate anions carrying EDOT or bis-EDOT units. Optical and electrochemical results evidence the crucial role of the EDOT moiety for modulating the electronic properties of the oligomers. The insertion of bis-EDOT unit in the middle of the molecule leads to a self-rigidification of the conjugated system due to non covalent S?O intramolecular interactions. The strong electron donor effect of the EDOT units explains the determining role of the relative position of the EDOT units on the localization and stabilization of the positive charges in the radical cation or dication states.     

Inhibition of Bacterial Adhesion and Biofilm Formation by Seed-Derived Ethanol Extracts from Persea americana Mill

The increase in antibiotic resistance demands innovative strategies to combat microorganisms. The current study evaluated the antibacterial and antivirulence effects of ethanol extracts from Persea americana seeds obtained by the Soxhlet (SE) and maceration (MaE) methods. The UHPLC-DAD-QTOF analysis showed mainly the presence of polyphenols and neolignan. Ethanol extracts were not cytotoxic to mammalian cells (CC₅₀ > 500 µg/mL) and displayed a moderate antibacterial activity against Pseudomonas aeruginosa (IC₅₀ = 87 and 187 µg/mL) and Staphylococcus aureus (IC₅₀ = 144 and 159 µg/mL). Interestingly, no antibacterial activity was found against Escherichia coli. SE and MaE extracts were also able to significantly reduce the bacterial adhesion to A549 lung epithelial cells. Additionally, both extracts inhibited the biofilm growth at 24 h and facilitated the release of internal cell components in P. aeruginosa, which might be associated with cell membrane destabilization. Real-time PCR and agarose electrophoresis gel analysis indicated that avocado seed ethanol extracts (64 µg/mL) downregulated virulence-related factors such as mexT and lasA genes. Our results support the potential of bioproducts from P. americana seeds as anti-adhesive and anti-biofilm agents.     

Access to nonisocyanate poly(thio)urethanes: A comparative study

This article describes the synthesis of new cyclic compounds able to react with amines to get nonisocyanate polyurethanes (NIPUs). The contribution of the most studied five‐membered cyclic carbonate was compared to five‐membered cyclic dithiocarbonate analogous and to a six‐membered cyclic carbonate. Difunctional reactive species were obtained by a simple substitution reaction or an efficient thiol–ene coupling reaction. The products, obtained with high yields, were characterized by 1H NMR, 13C NMR, and Fourier tansform infrared spectroscopy analysis. The dicyclocarbonates were then used to synthesize NIPUs by step growth polymerization with several diamines. These materials exhibited glass transition temperatures from 19 to ?29 °C, molar mass from 1800 to 20,400 g mol^?1, and a 20% mass loss temperature (T_d = 20%) between 249 and 296 °C. Such materials are interesting candidates for coating applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3284–3296     

Preparation of Chiral Amino Esters by Asymmetric Phase‐Transfer Catalyzed Alkylations of Schiff Bases in a Ball Mill

The asymmetric alkylation of Schiff bases under basic conditions in a ball mill was performed. The starting Schiff bases of glycine were prepared beforehand by milling protected glycine hydrochloride and benzophenone imine, in the absence of solvent. The Schiff base was then reacted with a halogenated derivative in a ball mill in the presence of KOH. By adding a chiral ammonium salt derived from cinchonidine, the reaction proceeded asymmetrically under phase‐transfer catalysis conditions, giving excellent yields and enantiomeric excesses up to 75 %. Because an equimolar amount of starting material was used, purification was greatly simplified.     

A vectorial algorithm with finite element method for prediction of powder segregation in metal injection molding

The design of the mold and the choice of the injection parameters for metal injection molding (MIM) is required to maintain homogeneity of the filled mixture. However, powder segregation is unavoidable in MIM because of the significant difference in densities of the metallic powder and the polymer binder. To achieve an effective prediction of segregation effect, a biphasic model based on mixture theory is employed. The viscous behaviors of each phase and the interaction coefficient between the flows of the two phases should be determined. The solution of two coupled Navier–Stokes equations results in a tremendous computation effort. The previous development of an explicit algorithm makes the biphasic simulation much faster than that of the classic methods. However, it is strongly desired to reduce or even eliminate the numerous global solutions for pressure fields at each time step. Hence, a new vectorial algorithm is proposed and developed to perform the simulation only by vectorial operations. It provides the anticipated efficiency in the simulation of biphasic modeling, and the advantage to use the classic elements of equal‐order interpolations. Some results produced by the two algorithms are compared with the experimental values to validate the new vectorial algorithm. Copyright © 2012 John Wiley & Sons, Ltd.