Antibacterial Activity of Alpinia galanga (L) Willd Crude Extracts

Methanol, acetone and diethyl ether extracts of Alpinia galanga have been evaluated against pathogens viz. Bacillus subtilis MTCC 2391, Enterobacter aerogene, Enterobacter cloacae, Enterococcus faecalis, Escherichia coli MTCC 1563, Klebsiella pneumoniae, Pseudomonas aeruginosa MTCC 6642, Salmonella typhimurium, Staphylococcus aureus and Streptococcus epidermis using Agar well diffusion method. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of all the extracts were determined using the macrodilution method. Methanol extracts have shown excellent activity towards all the pathogens with MIC and MBC values ranging from 0.04–1.28 mg/ml and 0.08–2.56 mg/ml, respectively. The GC–MS analysis of methanol extracts have yielded compounds like 5-hydroxymethyl furfural (59.9%), benzyl alcohol (57.6%), 1,8 cineole (15.65%), methylcinnamate (9.4%), 3-phenyl-2-butanone (8.5%) and 1,2 benzenedicarboxylic acid (8.9%), which could be responsible for its broad spectrum activity. So, A. galanga can be quite resourceful for the development of new generation drugs.     

Simultaneous determination of angiotensins II and 1-7 by capillary zone electrophoresis in plasma and urine from hypertensive rats

We describe the procedure developed for the simultaneous detection and quantification of angiotensin II and angiotensin-(1-7), by capillary zone electrophoresis with UV detection by photodiode-array, at a wavelength of 200 nm, in the plasma and urine from hypertensive rats. Optimal separation was achieved with a 100 mM boric acid + 3 mM tartaric acid + 10 fM gold (III) chloride electrolyte solution at pH 9.80. The applied voltage was 30 kV and the capillary temperature was kept constant at 20 °C. The method was over the concentration range of 0.01-500 pmol/mL. All determination coefficients were higher or equal to 0.9985. Limits of detection and quantification for angiotensin II were 0.0110 pmol/mL (S/N = 3) and 0.0195 pmol/mL (S/N = 5), respectively. While for angiotensin-(1-7), the limits were 0.0112 pmol/mL (S/N = 3) and 0.0193 pmol/mL (S/N = 5), respectively. The present method offers a time-saving way to simultaneous determination of angiotensin II and angiotensin-(1-7), since it can be completed in 10 min, compared to other methodologies reported in the literature for capillary electrophoresis and liquid chromatography, which require more than 1 h for analysis of complex matrices, such as plasma and urine. The procedure is illustrated by experiments that quantify simultaneously angiotensin II and angiotensin-(1-7) in plasma and urine from hypertensive and normotensive rats, with and without antihypertensive treatment. The levels of angiotensin II and angiotensin-(1-7) detected in the experimental model, resulted in a recovery of 99.00-106.01% and a reproducibility of less than 10%. The proposed analytical method is a use full tool for the simultaneous detection of angiotensin II and angiotensin-(1-7) implicated in vascular remodeling in pathologies such as hypertension.     

A new and efficient variable selection algorithm based on ant colony optimization. Applications to near infrared spectroscopy/partial least-squares analysis

A new variable selection algorithm is described, based on ant colony optimization (ACO). The algorithm aim is to choose, from a large number of available spectral wavelengths, those relevant to the estimation of analyte concentrations or sample properties when spectroscopic analysis is combined with multivariate calibration techniques such as partial least-squares (PLS) regression. The new algorithm employs the concept of cooperative pheromone accumulation, which is typical of ACO selection methods, and optimizes PLS models using a pre-defined number of variables, employing a Monte Carlo approach to discard irrelevant sensors. The performance has been tested on a simulated system, where it shows a significant superiority over other commonly employed selection methods, such as genetic algorithms. Several near infrared spectroscopic experimental data sets have been subjected to the present ACO algorithm, with PLS leading to improved analytical figures of merit upon wavelength selection. The method could be helpful in other chemometric activities such as classification or quantitative structure-activity relationship (QSAR) problems.     

Analysis of chiral amino acids in cerebrospinal fluid samples linked to different stages of Alzheimer disease

Chiral micellar electrokinetic chromatography with laser-induced fluorescence detection (chiral-MEKC-LIF) was used to investigate D- and L-amino acid contents in cerebrospinal fluid (CSF) samples related to different Alzheimer disease (AD) stages. CSF samples were taken from (i) control subjects (S1 pool), (ii) subjects showing a mild cognitive impairment who remained stable (S2 pool), (iii) subjects showing an mild cognitive impairment that progressed to AD (S3 pool) and (iv) subjects diagnosed with AD (S4 pool). The optimized procedure only needed 10 μL of CSF and it included sample cleaning, derivatization with FITC and chiral-MEKC-LIF separation. Eighteen standard amino acids were baseline separated with efficiencies up to 703,000 plates/m, high sensitivity (LODs in the nM range) and good resolution (values ranging from 2.6 to 9.5). Using this method, L-Arg, L-Leu, L-Gln, γ-aminobutyric acid, L-Ser, D-Ser, L-Ala, Gly, L-Lys, L-Glu and L-Asp were detected in all the CSF samples. S3 and S4 samples (i.e. AD subjects) showed significant lower amounts of L-Arg L-Lys, L-Glu and L-Asp compared to the non-AD S1 and S2 samples, showing in the S4 group the lowest amounts of L-Arg L-Lys, L-Glu and L-Asp. Moreover, γ-aminobutyric acid was significantly higher in AD subjects with the highest amount also found for S4. No significant differences were observed for the rest of amino acids including D-Ser. Based on the obtained chiral-MEKC-LIF data, it was possible to correctly classify all the samples into the four groups. These results demonstrate that the use of enantioselective procedures as the one developed in this work can provide some new light on the investigations of AD, including the discovery of new biomarkers related to different stages of AD.     

Synthesis and photophysics of silicon phthalocyanine-perylenebisimide triads connected through rigid and flexible bridges

Three new bisperylenebisimide-silicon phthalocyanine triads [(PBI)(2)-SiPcs 1, 2, and 3] connected with either rigid or flexible bridges were synthesized and characterized. A new synthetic approach to connect SiPc and PBI moieties through click chemistry produced triad 3 with an 80% yield. In (PBI)(2)-SiPc 1, PBI and SiPc are orthogonal and were connected with a rigid connector; triads 2 and 3 bear flexible aliphatic bridges, resulting in a tilted (2) or nearly parallel arrangement (3) of PBI and SiPc. Photoinduced intramolecular processes in these (PBI)(2)-SiPcs were studied and the results are compared with those of the reference compounds SiPc-ref and PBI-ref. The occurrence of electron-transfer processes between the SiPc and PBI units was confirmed by time-resolved emission and transient absorption techniques. Charge-separated (CS) states with lifetimes of 0.91, 1.3 and 2.0 ns for triads 1, 2, and 3, respectively, were detected using femtosecond laser flash photolysis. Upon the addition of Mg(ClO(4))(2), an increase in the lifetime of the CS states to 59, 110 and 200 μs was observed for triads (PBI)(2)-SiPcs 1, 2, and 3, respectively. The energy of the CS state (SiPc(·+)-PDI(·-)/Mg(2+)) is lower than the energy of both silicon phthalocyanine ((3)SiPc*-PDI) and perylenebisimide (SiPc-(3)PDI*) triplet excited states, which decelerates the metal ion-decoupled electron-transfer process for charge recombination to the ground state, thus increasing the lifetime of the CS state. The photophysics of the three triads demonstrate the importance of the rigidity of the spacer and the orientation between donor and acceptor units.     

Liquid phase microextraction applications in food analysis

Over the last years, liquid-phase microextraction (LPME) in its different application modes (single drop microextraction, dispersive liquid-liquid microextraction and hollow fiber-LPME) has been increasingly applied for the extraction of both inorganic and organic analytes from different matrices. Its advantages over conventional extraction procedures (simplicity, effectiveness, rapidity and low consumption of organic solvents) has also attracted its application in the complex food analysis field, in which it has clearly provided good and challenging results. A comprehensive review dealing with those articles published since its introduction till the end of March 2011 is presented, offering also a critical vision of the analytical potential of LPME for the analysis of foods.     

Lanthanide(III)/pyrimidine-4,6-dicarboxylate/oxalate extended frameworks: a detailed study based on the lanthanide contraction and temperature effects

Detailed structural, magnetic, and luminescence studies of six different crystalline phases obtained in the lanthanide/pyrimidine-4,6-dicarboxylate/oxalate system have been afforded: {[Ln(μ-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·3H(2)O}(n) (1-Ln), {[Ln(μ-pmdc)(μ-ox)(0.5)(H(2)O)(3)]·2H(2)O}(n) (2-Ln), {[Ln(μ(3)-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·~2.33H(2)O}(n) (3-Ln), {[Ln(2)(μ(3)-pmdc)(μ(4)-pmdc)(μ-ox)(H(2)O)(3)]·5H(2)O}(n) (4-Ln), {[Ln(μ(3)-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·H(2)O}(n) (5-Ln), and [Ln(pmdc)(1.5)(H(2)O)(2.5)] (6-Ln). The slow generation of the oxalate (ox) anion, obtained from the in situ partial hydrothermal decomposition of the pyrimidine-4,6-dicarboxylate (pmdc) ligand, allows us to obtain good shaped single crystals, while direct addition of potassium oxalate provides the same compounds but as polycrystalline samples. The crystal structures of all compounds are based on the double chelation established by the pmdc and ox ligands to provide distorted 2D honeycomb layers that, in some cases, are fused together, leading to 3D systems, by replacing some of the coordinated water molecules that complete the coordination sphere of the lanthanide by uncoordinated carboxylate oxygen atoms of the pmdc. The presence of channels occupied by crystallization water molecules is also a common feature with the exception of compounds 5-Ln. It is worth noting that compounds 3-Ln present a commensurate crystal structure related to the partial occupancy of the crystallization water molecules placed within the channels. Topological analyses have been carried out, showing a previously nonregistered topology for compounds 4-Ln, named as jcr1. The crystal structures are strongly dependent on the lanthanide ion size and the temperature employed during the hydrothermal synthesis. The lanthanide contraction favors crystal structures involving sterically less hindranced coordination environments for the final members of the lanthanide series. Additionally, reinforcement of the entropic effects at high temperatures directs the crystallization process toward less hydrated crystal structures. The magnetic data of these compounds indicate that the exchange coupling between the lanthanide atoms is almost negligible, so the magnetic behavior is dominated by the spin-orbit coupling and the ligand field perturbation. The luminescence properties that exhibit the compounds containing Nd(III), Eu(III), and Tb(III) have been also characterized.     

Surface and bulk cotton fibre modifications: plasma and cationization. Influence on dyeing with reactive dye

The surface of cotton fabrics was functionalized through corona plasma treatments and/or by cationising the whole of the fibre with an epihalohydrin. The effects of both treatments, individually and in combination are analyzed through wettability studies, by X-ray photoelectron spectroscopy (XPS), Scanning electron microscopy (SEM), and also by dyeing studies with an hetero bis functional reactive dye. Plasma improved wetting properties, exhaustion of the dyebaths and K/S_corr of the fabrics through surface functionalisation. Cationising of the cotton highly increased the exhaustion of the dyebaths and produced a dramatic improvement in K/S_corr. Plasma treatment previous to cationising increased the impregnation of the fabrics, but the effects of both treatments on dyeing parameters are additive only in column water rise and generally the effects obtained by cationising with the epihalohydrin prevail. The differences between both treatments are discussed in terms of surface functionalisation of the cotton fibres.     

Automated flow-based anion-exchange method for high-throughput isolation and real-time monitoring of RuBisCO in plant extracts

In this work, a miniaturized, completely enclosed multisyringe-flow system is proposed for high-throughput purification of RuBisCO from Triticum aestivum extracts. The automated method capitalizes on the uptake of the target protein at 4 °C onto Q-Sepharose Fast Flow strong anion-exchanger packed in a cylindrical microcolumn (105 × 4 mm) followed by a stepwise ionic-strength gradient elution (0-0.8 mol/L NaCl) to eliminate concomitant extract components and retrieve highly purified RuBisCO. The manifold is furnished downstream with a flow-through diode-array UV/vis spectrophotometer for real-time monitoring of the column effluent at the protein-specific wavelength of 280 nm to detect the elution of RuBisCO. Quantitation of RuBisCO and total soluble proteins in the eluate fractions were undertaken using polyacrylamide gel electrophoresis (PAGE) and the spectrophotometric Bradford assay, respectively. A comprehensive investigation of the effect of distinct concentration gradients on the isolation of RuBisCO and experimental conditions (namely, type of resin, column dimensions and mobile-phase flow rate) upon column capacity and analyte breakthrough was effected. The assembled set-up was aimed to critically ascertain the efficiency of preliminary batchwise pre-treatments of crude plant extracts (viz., polyethylenglycol (PEG) precipitation, ammonium sulphate precipitation and sucrose gradient centrifugation) in terms of RuBisCO purification and absolute recovery prior to automated anion-exchange column separation. Under the optimum physical and chemical conditions, the flow-through column system is able to admit crude plant extracts and gives rise to RuBisCO purification yields better than 75%, which might be increased up to 96 ± 9% with a prior PEG fractionation followed by sucrose gradient step.     

Concise and modular synthesis of regioisomeric haptens for the production of high-affinity and stereoselective antibodies to the strobilurin azoxystrobin

The immune response to regioisomeric haptens of azoxystrobin with varied derivatization sites was studied. Based on the Sonogashira and Suzuki-Miyaura couplings and following a straightforward modular design, we have synthesized four haptens with the same linker anchored through C-C bonds and located at different sites of the molecule. The most stereoselective antibodies were produced from immunogens with the spacer arm at a distal position from the β-methoxyacrylate moiety characteristic of strobilurins. Moreover, we observed that assay cross-reactivity was reliant on the functionalization site of the competitor derivative. Finally, the antibody binding site was explored using synthetic chemical analogues.