Clar valence bond representation of pi-bonding in carbon nanotubes

The application of the Clar aromatic sextet valence bond (VB) model to extended, defect-free single-walled carbon nanotubes (CNTs) with roll-up vectors (m, n) provides a real space model of their electronic structure. If m - n = 3k, where k is an integer, then all pi-electrons can be represented by aromatic sextets, and the CNT is fully benzenoid; the converse is also true. Since m - n = 3k is known to be a necessary criterion for conductivity in CNTs, only fully benzenoid CNTs are metallic, and only potentially metallic CNTs are fully benzenoid. This behavior contrasts with that of planar polycyclic aromatic hydrocarbons, in which the fully benzenoid structures are known to have large HOMO-LUMO gaps. For CNTs that are not fully benzenoid, e.g., m - n = 3k + l, where l = 1 or 2 and k is an integer, a seam of double bonds wraps about an otherwise benzenoid CNT at the chiral angle - 60 degrees or the chiral angle, respectively. Nucleus-independent chemical shift calculations on hydrogen-terminated CNT segments support this, and show that the magnetic manifestation of aromatic sextets is not due to electron correlation. The resonance hybrid of the Clar VB structures corresponds to patterns occasionally observed in scanning tunneling microscopy images of CNTs.     

Templates direct the sequence-specific anchoring of the C-terminus of peptido RNAs

When amino acids and ribonucleotides react in aqueous condensation buffer, they form peptido RNA with a phosphoramidate bond between the N-terminus of the peptide and the 5′-terminal phosphate of a ribonucleotide. If peptido RNA was the product of spontaneous reactions of amino acids and nucleotides, there must have been a transition to peptidyl tRNAs, where the C-terminus of the peptide is ester-linked to the 2′,3′-terminus of an oligonucleotide. Here we report how short peptido RNAs react with the 3′-terminus of oligodeoxynucleotides, templated by RNA strands. In our model system, the rate and yield of the anchoring of the C-terminus of the dipeptido dinucleotides to an amino group was found to depend on the sequence of the peptide, the 5′-terminal nucleotide of the dinucleotide and the RNA template. In all cases tested, highest yields were found for dinucleotides hybridizing next to the primer terminus. For the most reactive species, GlyPro-AA, anchoring yields ranged from 8–99%, depending on the template. When LeuLeu-AA, PhePhe-AA and GlyGly-AA were allowed to compete for anchoring on 3′-UUC-5′ as templating sequence, they gave a product ratio of 1 : 2 : 6, and this selectivity was almost independent of the terminal base of the primer. Our results show the control that a simple duplex context has over the covalent anchoring of peptido RNAs at a position known from peptidyl tRNAs. Processes of this type may have bridged the gap between untemplated condensation reactions and the highly specific processes of ribosomal protein synthesis.

The C-terminus of dipeptido dinucleotides reacts with the 3′-terminus of a primer strand in template directed fashion with a strong dependence on the structures of peptide and template.     

Structural characterization of plasmenylcholine photooxidation products

Oxidative damage to plasmenyl-type lipids contributes to decreased membrane barrier function, loss of membrane structure and formation of nonlamellar defects in membrane bilayers. Previous results from this laboratory have shown that membrane-soluble sensitizers (e.g. zinc phthalocyanine and bacteriochlorophyll a) mediate the photooxidation of palmitoyl plasmenylcholine (1-O-alk-1'-Z-enyl-2-palmitoyl-sn-glycero-3-phosphocholine; PPlsC) vesicles with the subsequent creation of lamellar defect structures, vesicle contents leakage and membrane-membrane fusion. Because plasmalogen lipids are significant components of sarcoplasma and myelin membranes, we sought to characterize the products of their photooxidation. This study focuses on the photooxidation of PPlsC vesicles in the presence of the water-soluble sensitizer, aluminum phthalocyanine tetrasulfonate (AlPcS4(4-)). Attack of photogenerated singlet oxygen on the 1-O-alkenyl ether linkage of PPlsC lipids was expected to generate dioxetane- and ene-type photoproducts. The products formed during continuous aerobic irradiation (28 mW/cm2, (610 nm) of PPlsC vesicles in the presence of AlPcS4(4-) were separated via reverse-phase high-performance liquid chromatography (HPLC) with electrochemical detection (ECD) or evaporative light-scattering detection (ELSD). Photooxidized dipalmitoyl-phosphatidylcholine-cholesterol vesicles (control) were used to optimize the HPLC-ECD conditions, using 7 alpha-hydroperoxy-cholesterol as standard. HPLC-ECD was found to be most sensitive for PPlsC hydroperoxides, whereas HPLC-ELSD was more sensitive for nonhydroperoxide photoproducts. The three major photoproducts formed during vesicle irradiation were isolated via preparative HPLC and then characterized by 1H-nuclear magnetic resonance and mass spectrometry. 1-Formyl-2-palmitoyl-sn-glycero-3-phosphocholine and 1-hydroxy-2-palmitoyl-sn-glycero-3-phosphocholine were identified as dioxetane cleavage products that coeluted at approximately 3 min. The second fraction (retention time [RT] = 48 min) was identified as a PPlsC allylic hydroperoxide. The third photoproduct, eluting at RT = 64 min, is tentatively identified as an oxidation product arising from allylic hydroperoxide degradation via Hock rearrangement or free radical decomposition.     

Optimization of catalyst enantioselectivity and activity using achiral and meso ligands

The optimization of asymmetric catalysts for enantioselective synthesis has conventionally revolved around the synthesis and screening of enantiopure ligands. In contrast, we have optimized an asymmetric reaction by modification of a series of achiral ligands. Thus, employing (S)-3,3'-diphenyl BINOL [(S)-Ph(2)-BINOL] and a series of achiral diimine and diamine activators in the asymmetric addition of alkyl groups to benzaldehyde, we have observed enantiomeric excesses between 96% (R) and 75% (S) of 1-phenyl-1-propanol. Some of the ligands examined have low-energy chiral conformations that can contribute to the chiral environment of the catalyst. These include achiral diimine ligands with meso backbones that adopt chiral conformations, achiral diimine ligands with backbones that become axially chiral on coordination to metal centers, achiral diamine ligands that form stereocenters on coordination to metal centers, and achiral diamine ligands with pendant groups that have axially chiral conformations. Additionally, we have structurally characterized (Ph(2)-BINOLate)Zn(diimine) and (Ph(2)-BINOLate)Zn(diamine) complexes and studied their solution behavior.     

Protection-deprotection chemistry to control styrene self-directed line growth on hydrogen-terminated Si(100)

TEMPO, 2,2,6,6-tetramethylpiperidinyloxy, was used in a series of protection-deprotection chemical reactions in order to gain single molecule-level control over the extent of styrene line growth on hydrogen-terminated Si(100). The mechanism involves the reaction of TEMPO with the dangling bond at the end of individual styrene lines. The TEMPO cap protects the dangling bond from further reaction with styrene resulting in the termination of line growth. TEMPO is then selectively removed from desired lines, deprotecting the dangling bond, using the scanning tunneling microscope. Further exposure of the surface to styrene ensures that only the deprotected areas continue to grow while the protected lines do not. All lines can then be capped with TEMPO, and this allows for the generation of stable styrene lines of varying lengths.     

Templated surfactant readsorption on polyelectrolyte-induced depleted surfactant surfaces

Changes in the structure of a surfactant adsorbed on oxidized silicon arising from interaction with a polyelectrolyte have been studied using polarized infrared attenuated total reflection spectroscopy. Specifically, the cationic surfactant cetyltrimethylammonium bromide (CTAB) was found to form a highly ordered layer on oxidized silicon at a concentration of 5.5 x 10(-5) M and a pH of 9.6. Addition of a solution of the anionic polyelectrolyte poly(styrenesulfonate) to the ordered CTAB layer resulted in a rapid and dramatic decrease in the surface excess of CTAB. Interestingly however, the interfacial order of the residual surfactant was retained for a time period greater than 1 h, before decreasing. Reintroduction of a surfactant solution prior to destabilization of the residual interfacial CTAB resulted in the readsorption of the surfactant, the recovery of the initial equilibrium coverage, and the maintenance of an ordered CTAB conformation. This desorption/readsorption process may be subsequently repeated without destroying the order of the CTAB on the surface. If however sufficient time is allowed for the residual interfacial surfactant to destabilize prior to readdition of CTAB, the degree of surfactant order remains low, despite the rapid reobtainment of a surface excess equal to or greater than that initially measured. These results are interpreted in terms of polymer/surfactant interfacial complexation and the removal of adsorbed surfactant into solution. The ordering behavior of the residual surfactant suggests that CTAB is left on the surface in isolated patches of highly ordered species that maintain their order until two-dimensional diffusion leads to a more homogeneous surfactant surface distribution and hence the loss of conformational order. The degree of orientation order assumed by surfactant readsorbing on a depleted surface appears to be templated by the order of the residual interfacial surfactant, suggestive of a two-dimensional epitaxial growth mechanism for CTAB readsorption.     

Non-heme iron(II) complexes containing tripodal tetradentate nitrogen ligands and their application in alkane oxidation catalysis

A series of iron(II) bis(triflate) complexes containing tripodal tetradentate nitrogen ligands with pyridine and dimethylamine donors of the type [N(CH(2)Pyr)(3-n)()(CH(2)CH(2)NMe(2))(n)] [n = 0 (tpa, 1), n = 1 (iso-bpmen, 3), n = 2 (Me(4)-benpa, 4), n = 3 (Me(6)-tren, 5)] and the linear tetradentate ligand [(CH(2)Pyr)MeN(CH(2)CH(2))NMe(CH(2)Pyr), (bpmen, 2)] has been prepared. The preferred coordination geometry of these complexes in the solid state and in CH(2)Cl(2) solution changes from six- to five-coordinate in the order from 1 to 5. In acetonitrile, the triflate ligands of all complexes are readily displaced by acetonitrile ligands. The complex [Fe(1)(CH(3)CN)(2)](2+) is essentially low spin at room temperature, whereas ligands with fewer pyridine donors increase the preference for high-spin Fe(II). Both the number of pyridine donors and the spin state of the metal center strongly affect the intensity of a characteristic MLCT band around 400 nm. The catalytic properties of the complexes for the oxidation of alkanes have been evaluated, using cyclohexane as the substrate. Complexes containing ligands 1-3 are more active and selective catalysts, possibly operating via a metal-based oxidation mechanism, whereas complexes containing ligands 4 and 5 give rise to Fenton-type chemistry.     

Lattice-Boltzmann simulations of the dynamics of polymer solutions in periodic and confined geometries

A numerical method to simulate the dynamics of polymer solutions in confined geometries has been implemented and tested. The method combines a fluctuating lattice-Boltzmann model of the solvent [Ladd, Phys. Rev. Lett. 70, 1339 (1993)] with a point-particle model of the polymer chains. A friction term couples the monomers to the fluid [Ahlrichs and Dunweg, J. Chem. Phys. 111, 8225 (1999)], providing both the hydrodynamic interactions between the monomers and the correlated random forces. The coupled equations for particles and fluid are solved on an inertial time scale, which proves to be surprisingly simple and efficient, avoiding the costly linear algebra associated with Brownian dynamics. Complex confined geometries can be represented by a straightforward mapping of the boundary surfaces onto a regular three-dimensional grid. The hydrodynamic interactions between monomers are shown to compare well with solutions of the Stokes equations down to distances of the order of the grid spacing. Numerical results are presented for the radius of gyration, end-to-end distance, and diffusion coefficient of an isolated polymer chain, ranging from 16 to 1024 monomers in length. The simulations are in excellent agreement with renormalization group calculations for an excluded volume chain. We show that hydrodynamic interactions in large polymers can be systematically coarse-grained to substantially reduce the computational cost of the simulation. Finally, we examine the effects of confinement and flow on the polymer distribution and diffusion constant in a narrow channel. Our results support the qualitative conclusions of recent Brownian dynamics simulations of confined polymers [Jendrejack et al., J. Chem. Phys. 119, 1165 (2003) and Jendrejack et al., J. Chem. Phys. 120, 2513 (2004)].     

A self-assembled multivalent pseudopolyrotaxane for binding galectin-1

A self-assembled pseudopolyrotaxane consisting of lactoside-displaying cyclodextrin (CD) "beads" threaded onto a linear polyviologen "string" was investigated for its ability to inhibit galectin-1-mediated T-cell agglutination. The CDs of the pseudopolyrotaxane are able to spin around the axis of the polymer chain as well as to move back and forth along its backbone to alter the presentation of its ligand. This supramolecular superstructure incorporates all the advantages of polymeric structures, such as the ability to span large distances, along with a distinctively dynamic presentation of its lactoside ligands to afford a neoglycoconjugate that can adjust to the relative stereochemistries of the lectin's binding sites. The pseudopolyrotaxane exhibited a valency-corrected 10-fold enhancement over native lactose in the agglutination assay, which was greater than the enhancements observed for lactoside-bearing trivalent glycoclusters and a lactoside-bearing chitosan polymer tested using the same assay. The experimental results indicate that supramolecular architectures, such as the pseudopolyrotaxane, provide tools for investigating protein-carbohydrate interactions.     

HO2 ELIMINATION FROM α-HYDROXYALKYLPEROXYL RADICALS IN AQUEOUS SOLUTION

Abstract— In aqueous solutions α-hydroxyalkylperoxyl radicals undergo a spontaneous and a base catalysed HO₂ elimination. From kinetic deuterium isotope effects, temperature dependence, and the influence of solvent polarity it was concluded that the spontaneous reaction occurs via an HO₂ elimination followed by the dissociation of the latter into H⁺ and O₂^-. The rate constant of the spontaneous HO₂ elimination increases with increasing methyl substitution in α-position ( k (CH₂(OH)O₂) < 10s^-1 k (CH₃CH(OH)O₂) = 52s^-1 k ((CH₃)₂C(OH)O₂) = 665 s^-1). The OH^- catalysed reaction is somewhat below diffusion controlled. The mixture of peroxyl radicals derived from polyhydric alcohols eliminate HO₂ at two different rates. Possible reasons for this behaviour are discussed. The mixture of the six peroxyl radicals derived from d -glucose are observed to eliminate HO₂ with at least three different rates. The fastest rate is attributed to the HO₂ elimination from the peroxyl radical at C-l ( k > 7000s^-1). Because of the HO₂ eliminations the peroxyl radicals derived from d -glucose do not undergo a chain reaction in contrast to peroxyl radicals not containing an α-OH group. In competition with the first order elimination reactions the α-hydroxylalkylperoxyl radicals undergo a bimolecular decay. These reactions are briefly discussed.