HNO3-NHx, H2SO4-NHx, CH(O)OH-NHx, and CH3C(O)OH-NHx complexes and their role in the formation of condensation nuclei

The formation of sulfuric acid (H(2)SO(4)), nitric acid (HNO(3)), acetic acid (CH(3)C(O)OH), and formic acid (HC(O))H) complexes with ammonia (NH(3)), amidogen radical (NH(2)), and imidogen radical (NH) was studied using natural bond orbital calculations. The equilibrium structures, binding energies, and harmonic frequencies were calculated for each acid-NH(x) complex using hybrid density functional (B3LYP) and second-order M?ller-Plesset perturbation approximation methods with the 6-311++G(3df,3pd) basis set. The results presented here suggest that the effect of NH(2) on the formation of new condensation nuclei will be similar to that of NH(3), but to a lesser degree and confined primarily to complexes with H(2)SO(4) and HNO(3). The NH radical is not expected to play a significant role in the formation of new atmospheric condensation nuclei.     

Developing qualitative extraction profiles of coffee aromas utilizing polymeric ionic liquid sorbent coatings in headspace solid-phase microextraction gas chromatography-mass spectrometry

Two solid-phase microextraction (SPME) sorbent coatings based on polymeric ionic liquids (PILs) have been utilized for the analysis of complex coffee aroma samples. The PIL-based SPME coatings examined, namely, poly(1-(4-vinylbenzyl)-3-hexadecylimidazolium bis[(trifluoromethyl)sulfonyl]imide) [poly(VBHDIm⁺ NTf₂⁻)], with ∼14-μm thickness, and poly(1-vinyl-3-hexylimidazolium chloride) [poly(ViHIm⁺ Cl⁻)], with ∼8-μm thickness, were employed for the headspace determination of up to 49 analytes from four different coffee beans: two French roast coffees of different brands, Sumatra coffee, and decaffeinated Sumatra coffee. The analysis was conducted using gas chromatography coupled to mass spectrometry. For comparative purposes, the commercial polyacrylate (PA, 85-μm film thickness) SPME coating was utilized under the same extraction conditions. The three SPME coatings tested behaved quite differently as a function of the families of compounds extracted. Thus, the poly(VBHDIm⁺ NTf₂⁻) coating was extremely selective for aldehydes while also exhibiting good extraction efficiencies for acids. The poly-(ViHIm⁺ Cl⁻) coating exhibited superior performance for aromatic alcohols, and the PA coating worked better for heterocyclic aromatics. Both PIL-based SPME sorbent coatings demonstrated exceptional selectivity and extraction efficiency when dealing with complex coffee aromas in spite of their small film thicknesses.     

Task-specific microextractions using ionic liquids

Ionic liquids (ILs) have been the focus of many scientific investigations including the field of analytical microextractions. ILs have many advantages over traditional organic solvents making them excellent candidates as extraction media for a variety of microextraction techniques. Many physical properties of ILs can be varied, and the structural design and make-up can be tuned to impart desired functionality for enhancement of analyte extraction selectivity, efficiency, and sensitivity. This paper provides a brief overview of ionic liquids and highlights trends in three important sample-preparation techniques, namely, single drop microextraction, solid-phase microextraction, and dispersive liquid–liquid microextraction in terms of performing task-specific extractions using these highly versatile solvents.     

Gas-bubble effects on the formation of colloidal iron oxide nanocrystals

This paper reports that gas bubbles can be used to tailor the kinetics of the nucleation and growth of inorganic-nanocrystals in a colloidal synthesis. We conducted a mechanistic study of the synthesis of colloidal iron oxide nanocrystals using gas bubbles generated by boiling solvents or artificial Ar bubbling. We identified that bubbling effects take place through absorbing local latent heat released from the exothermic reactions involved in the nucleation and growth of iron oxide nanocrystals. Our results show that gas bubbles display a stronger effect on the nucleation of iron oxide nanocrystals than on their growth. These results indicate that the nucleation and growth of iron oxide nanocrystals may rely on different types of chemical reactions between the iron-oleate decomposition products: the nucleation relies on the strongly exothermic, multiple-bond formation reactions, whereas the growth of iron oxide nanocrystals may primarily depend upon single-bond formation reactions. The identification of exothermic reactions is further consistent with our results in the synthesis of iron oxide nanocrystals with boiling solvents at reaction temperatures ranging from 290 to 365 °C, by which we determined the reaction enthalpy in the nucleation of iron oxide nanocrystals to be -142 ± 12 kJ/mol. Moreover, our results suggest that a prerequisite for effectively suppressing secondary nucleation in a colloidal synthesis is that the primary nucleation must produce a critical amount of nuclei, and this finding is important for a priori design of colloidal synthesis of monodispersed nanocrystals in general.     

Surface-dependent chemical equilibrium constants and capacitances for bare and 3-cyanopropyldimethylchlorosilane coated silica nanochannels

We present a combined theoretical and experimental analysis of the solid-liquid interface of fused-silica nanofabricated channels with and without a hydrophilic 3-cyanopropyldimethylchlorosilane (cyanosilane) coating. We develop a model that relaxes the assumption that the surface parameters C(1), C(2), and pK(+) are constant and independent of surface composition. Our theoretical model consists of three parts: (i) a chemical equilibrium model of the bare or coated wall, (ii) a chemical equilibrium model of the buffered bulk electrolyte, and (iii) a self-consistent Gouy-Chapman-Stern triple-layer model of the electrochemical double layer coupling these two equilibrium models. To validate our model, we used both pH-sensitive dye-based capillary filling experiments as well as electro-osmotic current-monitoring measurements. Using our model we predict the dependence of ζ potential, surface charge density, and capillary filling length ratio on ionic strength for different surface compositions, which can be difficult to achieve otherwise.     

Immobilized boron-centered heteroscorpionates: heterocycle metathesis and coordination chemistry

The preparation of a resin-supported boron-scorpionate ligand and its nickel(II) coordination complexes are reported. The supported ligand is prepared as its potassium salt, making it a general reagent suitable for chelation of any transition metal ion. Resin-immobilized benzotriazole (Bead-btz) reacted cleanly with KTp* (Tp* = hydrotris(3,5-dimethylpyrazolyl)borate) by heterocycle metathesis in warm dimethylformamide (DMF) to yield bead-Tp'K, {resin-btz(H)B(pz*)(2)}K. Significantly, bead-Tp'K readily bound nickel(II) from simple salts with minimal leaching of the nickel ion. Bead-Tp'NiNO(3) reacts further with cysteine thiolate (ethyl ester), imparting the deep green color to the beads characteristic of a Tp(R)NiCysEt coordination sphere. Bead-Tp'NiCysEt exhibited an oxygen sensitivity similar to Tp*NiCysEt in solution (Inorg. Chem. 1999, p 5690) and also independently verified for a selenocystamine analogue, Tp*NiSeCysAm. Addition of fresh cysteine thiolate ethyl ester to oxidized bead-Tp'NiCysEt reproduced the original green color. Heterocycle metathesis was also used to prepare KTp' as a white solid. Reaction with nickel(II) gave (Tp')(2)Ni, separable into two different isomers. The air-sensitive molybdenum(0) complex, [PPh(4)][Tp'Mo(CO)(3)], was also prepared and the C(s) complex symmetry demonstrated by infrared and (13)C NMR spectroscopies. Immobilized TpmMo(CO)(3) was prepared from the previously reported resin-supported tris(pyrazolyl)methane. In contrast to its weak coordination of nickel(II) (Inorg. Chem. 2009, p 3535), bead-Tpm proved a strong chelate toward this second row metal. The supported scorpionates described here should find use in studies of selective metal-protein binding, metalloprotein modeling, and heterogeneous catalysis, and render such scorpionate applications amenable to combinatorial methods.     

Measurement and Prediction of Machining Induced Redistribution of Residual Stress in the Aluminium Alloy 7449

The residual stress distributions in two 7449 aluminium alloy rectilinear blocks have been determined using neutron diffraction. Heat treatment included cold water immersion quenching and a period of precipitation hardening. Quenching induced very high magnitude residual stresses into the two blocks. One block was measured in this condition while the other was incrementally machined by milling to half thickness. Neutron diffraction measurements were made on the milled half thickness block at equivalent locations to the unmachined block. This permitted through thickness measurements from both blocks to be compared, revealing the redistribution of residual stresses induced by machining. A square cross section post in the centre of the machined face was left to act as a stress free reference sample. The distortions arising on the face opposite to that being milled were measured using a co-ordinate measuring machine. The residual stresses and distortion arising in the blocks have been compared to finite element analysis prediction and found to generally agree. Material removal only caused distortion and the residual stresses to redistribute; there was no stress relaxation evident.     

Construction of fiber-optic bundle light-collection systems and calculations of collection efficiency

This paper describes the position-sensitive light-collection system that we use in our fast-beam laser experiments. The collection system consists of fiber-optic bundles whose facets are arranged to accept light emitted from a beam of fluorescent atoms. The flexibility of the fiber bundles allows their use in scanning collection systems with precise position sensitivity. We describe calculations of geometrical collection efficiency using a numerical integration scheme and compare the results with measurements. We also compare the collection efficiencies of the different fiber bundle arrangements that we used as our apparatus evolved with the implementation of various improvements.