Correlation of the Solubilizing Abilities of 1-Butyl-1-methyl-pyrrolidinium Tris(pentafluoroethyl)trifluorophosphate, 1-Butyl-1-methylpyrrolidinium Triflate and 1-Methoxyethyl-1-methylmorpholinium Tris(pentafluoroethyl)trifluorophosphate

Chromatographic retention data were measured for a wide range of organic solutes on 1-butyl-1-methylpyrolidinium tris(pentafluoroethyl)trifluorophosphate ([BMPyrr]⁺[FAP]^?), 1-butyl-1-methylpyrrolidinium triflate, ([BMPyrr]⁺[Trif]^?), and 1-methoxyethyl-1-methylmorpholinium tris(pentafluoroethyl)trifluorophosphate, ([MeoeMMorp]⁺[FAP]^?), stationary phases at (323, 353 and 383) K. The measured retention factors were combined with published infinite dilution activity coefficient and gas-to-water partition coefficient data to yield gas-to-anhydrous ionic liquid (IL) and water-to-anhydrous IL partition coefficients. The three sets of partition coefficients were analyzed using the Abraham model. The derived Abraham model correlations describe the observed gas-to-IL (log₁₀ K) and water-to-IL (log₁₀ P) partition coefficient data to within average standard deviations of about 0.11 and 0.15 log₁₀ units, respectively.     

Controlling the optical and catalytic properties of artificial metalloenzyme photocatalysts using chemogenetic engineering

Visible light photocatalysis enables a broad range of organic transformations that proceed via single electron or energy transfer. Metal polypyridyl complexes are among the most commonly employed visible light photocatalysts. The photophysical properties of these complexes have been extensively studied and can be tuned by modifying the substituents on the pyridine ligands. On the other hand, ligand modifications that enable substrate binding to control reaction selectivity remain rare. Given the exquisite control that enzymes exert over electron and energy transfer processes in nature, we envisioned that artificial metalloenzymes (ArMs) created by incorporating Ru(ii) polypyridyl complexes into a suitable protein scaffold could provide a means to control photocatalyst properties. This study describes approaches to create covalent and non-covalent ArMs from a variety of Ru(ii) polypyridyl cofactors and a prolyl oligopeptidase scaffold. A panel of ArMs with enhanced photophysical properties were engineered, and the nature of the scaffold/cofactor interactions in these systems was investigated. These ArMs provided higher yields and rates than Ru(Bpy)₃²⁺ for the reductive cyclization of dienones and the [2 + 2] photocycloaddition between C-cinnamoyl imidazole and 4-methoxystyrene, suggesting that protein scaffolds could provide a means to improve the efficiency of visible light photocatalysts.

Artificial metalloenzyme visible light photocatalysts possess enhanced optical properties and are competent towards single electron and energy transfer organic transformations.     

Experimental investigation into the nonlinear dynamics of a bistable laminate

Nonlinear Dynamics - An experimental study of the single-well and twin-well, also referred to as intra-well and inter-well, respectively, nonlinear dynamics of a bistable composite laminate is...     

Synthesis of copolyimides based on room temperature ionic liquid diamines

Block copolyimides based on aromatic dianhydrides and diamines copolymerized with diamino room temperature ionic liquid (RTIL) monomers were synthesized over a range of compositions. Specifically, two diamino RTILs, 1,3‐di(3‐aminopropyl) imidazolium bis[(trifluoromethyl)sulfonyl] imide ([DAPIM] [NTf₂]) and 1,12‐di[3‐(3‐aminopropyl) imidazolium] dodecane bis[(trifluoromethyl) sulfonyl] imide ([C₁₂ (DAPIM)₂] [NTf₂]₂) were synthesized using a Boc protection method. The two RTILs were reacted with 2,2‐bis(3,4‐carboxylphenyl) hexafluoropropane dianhydride (6FDA) to produce 6FDA‐RTILs oligomers that formed the RTIL component for the block copolyimides. The oligomers were reacted with 6FDA and m‐phenylenediamine (MDA) at oligomer concentration from 6.5 to 25.8 mol % to form block copolyimides. Increasing the concentration of the 6FDA‐RTIL oligomer in the block copolyimides resulted in a decrease in the thermal degradation temperature, glass transition temperature and an increase in the density. The gas permeability of the RTIL based block copolyimide decreased but the ideal permeability selectivity for CO₂/CH₄ gas pair increased relative to the pure 6FDA‐MDA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4036–4046, 2010     

Detoxification of Chemical Warfare Agents Using a Zr6‐Based Metal–Organic Framework/Polymer Mixture

Owing to their high surface area, periodic distribution of metal sites, and water stability, zirconium‐based metal–organic frameworks (Zr₆‐MOFs) have shown promising activity for the hydrolysis of nerve agents GD and VX, as well as the simulant, dimethyl 4‐nitrophenylphosphate (DMNP), in buffered solutions. A hurdle to using MOFs for this application is the current need for a buffer solution. Here the destruction of the simulant DMNP, as well as the chemical warfare agents (GD and VX) through hydrolysis using a MOF catalyst mixed with a non‐volatile, water‐insoluble, heterogeneous buffer is reported. The hydrolysis of the simulant and nerve agents in the presence of the heterogeneous buffer was fast and effective.     

Driven production of cold antihydrogen and the first measured distribution of antihydrogen states

Cold antihydrogen is produced when antiprotons are repeatedly driven into collisions with cold positrons within a nested Penning trap. Efficient antihydrogen production takes place during many cycles of positron cooling of antiprotons. A first measurement of a distribution of antihydrogen states is made using a preionizing electric field between separated production and detection regions. Surviving antihydrogen is stripped in an ionization well that captures and stores the freed antiproton for background-free detection.     

Background-free observation of cold antihydrogen with field-ionization analysis of its states

A background-free observation of cold antihydrogen atoms is made using field ionization followed by antiproton storage, a detection method that provides the first experimental information about antihydrogen atomic states. More antihydrogen atoms can be field ionized in an hour than all the antimatter atoms that have been previously reported, and the production rate per incident high energy antiproton is higher than ever observed. The high rate and the high Rydberg states suggest that the antihydrogen is formed via three-body recombination.     

In-Process Particle Size Distribution Measurements and Control

In-process measurement of particle size and concentration distributions provides continuous analysis, quality control, and optimization of product yield. As process production rates continue to improve, the delay between laboratory analysis and process correction of the product stream becomes more significant and costly in many commercial applications. Elimination of sample handling and operator manipulation is now possible for most pneumatic flows using optical methods which are properly interfaced with the process stream. Insitec has developed such an instrument based on ensemble laser-diffraction that has been successfully applied to a wide range of research and industrial process applications. As part of the adaptation of instrumentation to the specific needs of different process applications, we have developed several different interface arrangements, including a direct inline system and an eductor bypass instrument. A specific window purge design has been developed and shown to operate for extended time periods (exceeding one month and more) without maintenance. To address the wide range of operating concentrations that occur in practice, a variable pathlength interface has been developed along with a deconvolution algorithm that corrects multiple scattering effects for light transmissions down to 20%. Distribution update rates are computed and displayed in less than 5 seconds. This methodology is described along with measurements in a non-steady pharmaceutical powder processing application. Results show uniform size measurement for ten-fold concentration variations. Real time measurements allowed diagnosis and correction of non-steady feed rates to a classifier-mill.