Creation of a monopole in a spinor condensate

We propose a method to create a monopole structure in a multicomponent condensate by applying the basic methods used to create vortices and solitons experimentally in single-component condensates. We also show that by using a two-component structure for a monopole, we can avoid many problems related to the previously suggested three-component monopole. We discuss the observation and dynamics of such a monopole structure, and note that the dynamics of the two-component monopole differs from the dynamics of the three-component monopole.     

The Formation of Porous Membranes by Filtration of Aerosol Nanoparticles

Flame-generated aerosol particles of Al₂O₃ were deposited by gas filtration on two types of porous and ceramic tubes of -Al₂O₃ with mean pore diameters of 450 and 2700nm, respectively. The particles were aggregates with average mobility diameters in the range of 30–100nm and primary particle diameters of 4–8nm. The particles are characterized by differential mobility analysis, transmission electron microscopy, and by their specific surface area. The deposited membranes are characterized by gas permeability measurements, scanning electron microscopy, and by their pore size distribution from nitrogen capillary condensation. The particles form a distinct, homogeneous membrane layer with a porosity of 90% on top of the substrate surface and only penetrate slightly into the substrate structure. The mean pore sizes of the deposited membranes determined by nitrogen condensation agree approximately with those determined by gas permeation and the specific surface area. The mean pore diameter varies in the range of 30–70nm. The gas permeability of the deposited membranes is related to the specific surface area but influenced by the high porosity. The mean pore size and the permeability of the membranes are almost independent of the substrate structure.The development of a membrane with uniform properties is preceded by a short initial period in which the deposited particles, with an equivalent membrane thickness of roughly 2m, have a significantly lower permeability than the ultimately developed uniform membrane layer. This effect is particularly significant for the aerosol particles with the lowest mean size, probably due to particles deposited in the pore mouths of the substrate.The particles and the deposited membranes are X-ray amorphous but retain their specific surface area on heating to even high temperatures. When the membranes are heated to 1473K for 10h, X-ray diffraction shows a mixture of - and -alumina, accompanied by a partial disintegration of the membrane and a considerable loss of surface area.     

Quasi-two-dimensional superfluid fermionic gases

We study a quasi-two-dimensional superfluid Fermi gas where the confinement in the third direction is due to a strong harmonic trapping. We investigate the behavior of such a system when the chemical potential is varied and find strong modifications of the superfluid properties due to the discrete harmonic oscillator states. We show that such quasi-two-dimensional behavior can be created and observed with current experimental capabilities.     

Transfer and storage of vortex states in light and matter waves

We theoretically explore the transfer of vortex states between atomic Bose-Einstein condensates and optical pulses using ultraslow and stopped light techniques. We find shining a coupling laser on a rotating two-component ground state condensate with a vortex lattice generates a probe laser field with optical vortices. We also find that optical vortex states can be robustly stored in the atomic superfluids for times, in Rb-87 condensates, limited only by the ground state coherence time.     

Water stability of a cheap sol-gel-based adhesive

The humidity and water tolerance of a sol-gel derived binder prepared using a cheap, multicomponent precursor has been studied. The sol was prepared by dissolving the precursor in water under acidic conditions using either formic acid or a mixture of formic acid and citric acid for pH adjustments. It is shown that a post-treatment temperature of 400 °C or higher is needed in order to achieve full binder stability under excess water conditions, as thermal decomposition of metal carboxylates leads to a pronounced decrease in water solubility of the gels. The mesoporous gel can be made hydrophobic by post-treatments with either a silane or an organophosphonate, showing that both silica and metal oxides are exposed on the surface of the binder. Surface functionalization is especially effective for gels heat-treated at higher temperatures where the metal carboxylates have decomposed to the corresponding oxides or carbonates. The results are expected to be of great importance for the use of this cheap binder in large scale industrial applications. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Viscoelasticity and water plasticization of polymer-cellulose composite films and paper sheets

Viscoelastic properties of cellulose microfibril—polymer composites and paper sheets were studied with dynamic mechanical analysis as a function of relative humidity in order to assess the bonding properties in cellulosic networks. The amount of associated water in the composites (equilibrium moisture content) was measured by thermogravimetry. Water plasticization was evidenced by DMA both in composite and paper samples. Polymers with high affinity to water, e.g. carboxymethyl cellulose, clearly increased the water plasticization in the composites. The plasticization behavior of paper sheet samples was also influenced by polymers. However, the effect of polymers on the plasticization was different between the composite and the paper samples. The consideration of fiber bonding domain in paper structure as a gel-like layer consisting of cellulose microfibrils, polymers, and associated water can help to unveil some of the complex mechanisms behind the strength in fibrous cellulosic materials.     

3D ultrasound reconstruction algorithms from analog and digital data

Freehand 3D ultrasound is increasingly being introduced in the clinic for diagnostics and image-assisted interventions. Various algorithms exist for combining 2D images of regular ultrasound probes to 3D volumes, being either voxel-, pixel- or function-based. Previously, the most commonly used input to 3D ultrasound reconstruction has been digitized analog video. However, recent scanners that offer access to digital image frames exist, either as processed or unprocessed data. To our knowledge, no comparison has been performed to determine which data source gives the best reconstruction quality. In the present study we compared both reconstruction algorithms and data sources using novel comparison methods for detecting potential differences in image quality of the reconstructed volumes. The ultrasound scanner used in this study was the Sonix RP from Ultrasonix Medical Corp (Richmond, Canada), a scanner that allow third party access to unprocessed and processed digital data. The ultrasound probe used was the L14-5/38 linear probe. The assessment is based on a number of image criteria: detectability of wire targets, spatial resolution, detectability of small barely visible structures, subjective tissue image quality, and volume geometry. In addition we have also performed the more “traditional” comparison of reconstructed volumes by removing a percentage of the input data. By using these evaluation methods and data from the specific scanner, the results showed that the processed video performed better than the digital scan-line data, digital video being better than analog video. Furthermore, the results showed that the choice of video source was more important than the choice of tested reconstruction algorithms.     

Boundedness of a class of bi-parameter square functions in the upper half-space

We consider a class of bi-parameter kernels and related square functions in the upper half-space, and give an efficient proof of a boundedness criterion for them. The proof uses modern probabilistic averaging methods and is based on controlling double Whitney averages over good cubes.     

Synthesis and biomimetic mineralization of l‐proline substituted polyphosphazenes as bulk and nanofiber

This work presents the synthesis of polyphosphazenes bearing L ‐proline methyl ester (ProOMe) and 4‐hydroxy‐l ‐proline methyl ester (HypOMe), aiming for new bioactive polymers for bone repair. The polymers were characterized by ¹H and ³¹P NMR, FTIR, DSC, and TGA. Electrospun fibers were prepared using poly[bis(l ‐proline methyl ester)phosphazene] (PProP), and their potential for biomimetic mineralization, as well as the bulk material, were tested in simulated body fluid (1×SBF). Samples were analyzed between 24 h and 3 weeks of incubation using SEM/EDS and FTIR. After 24 h, spherical and flower‐like shapes of calcium phosphates (CaP) were crystallized on the bulk samples. The nanofibers presented spherical CaP crystals attached to them after 48 h of incubation. The Ca/P molar ratio of the crystals varied from 1.5 to 1.6. According to this study, PProP presents bioactivity in vitro, and its fibers offer sites for CaP nucleation like the collagen fibers in bone. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1318–1327     

Retention of lysozyme activity by physical immobilization in nanocellulose aerogels and antibacterial effects

Aerogels prepared from aqueous dispersions of anionic and cationic cellulose nanofibrils (CNFs) were investigated as solid supports for enzymes and silver nanoparticles and to elicit a sustained antibacterial effect. The imparted stabilization in dry conditions was studied with aerogels that were cast after mixing the enzymes with CNFs followed by dehydration (freeze-drying). The activity of lysozyme immobilized in the given CNF system was analyzed upon storage in liquid and air media. In contrast with aqueous solutions of free, unbound enzyme, which lost activity after the first day, the enzyme immobilized physically in unmodified and cationic CNF presented better stability (activity for a longer time). However, the enzyme activity was reduced in the case of anionic CNF, which was prepared by TEMPO-mediated oxidation (TO-CNF). Both humidity and temperature reduced the stability of the enzyme immobilized in the respective CNF aerogel. The antibacterial activity of CNF aerogels carrying lysozyme was also tested against gram-negative and gram-positive bacteria. The results were compared with those obtained from CNF systems loaded with silver nanoparticles (AgNP) after in situ synthesis via UV reduction. Storage in cold or dry conditions preserved the activity and antibacterial performance of enzyme-loaded CNF aerogels. As expected, the lysozyme-containing aerogels showed lower inhibition than the AgNP-containing aerogel. In this latter case, the antibacterial activity depended on the concentration and size of the nanoparticles. Compared to unmodified CNF and TO-CNF, the aerogels prepared with cationic CNF, loaded with either lysozyme or AgNPs, showed remarkably better antibacterial activity. Similar experiments were conducted with horseradish peroxidase, which confirmed, to different degrees, the observations derived from the lysozyme systems. Overall, the results indicate that non-toxic and biodegradable CNF is a suitable support for bio-active materials and is effective in protecting and retaining enzymatic and antibacterial activities.