Formation of Octameric Methylaluminoxanes by Hydrolysis of Trimethylaluminum and the Mechanisms of Catalyst Activation in Single‐Site α‐Olefin Polymerization Catalysis

Hydrolysis of trimethylaluminum (TMA) leads to the formation of methylaluminoxanes (MAO) of general formula (MeAlO)_n(AlMe₃)_m. The thermodynamically favored pathway of MAO formation is followed up to n=8, showing the major impact of associated TMA on the structural characteristics of the MAOs. The MAOs bind up to five TMA molecules, thereby inducing transition from cages into rings and sheets. Zirconocene catalyst activation studies using model MAO co‐catalysts show the decisive role of the associated TMA in forming the catalytically active sites. Catalyst activation can take place either by Lewis‐acidic abstraction of an alkyl or halide ligand from the precatalyst or by reaction of the precatalyst with an MAO‐derived AlMe₂⁺ cation. Thermodynamics suggest that activation through AlMe₂⁺ transfer is the dominant mechanism because sites that are able to release AlMe₂⁺ are more abundant than Lewis‐acidic sites. The model catalyst system is demonstrated to polymerize ethene.     

Pore-Scale Level Set Simulations of Capillary-Controlled Displacement with Adaptive Mesh Refinement

Transport in Porous Media - Multiphase flow simulations on imaged porous rock structures require numerical methods that are accurate and robust when applied on complex geometries. A key element in...     

Adaptation of the human skin by chronic solar-simulating UV irradiation prevents ultraviolet-B irradiation-induced rise in serum C-reactive protein levels

Exposure of the skin to UV radiation induces local inflammation. We hypothesized that inflammation induced by erythemal UV-B irradiation could elevate levels of serum C-reactive protein (CRP) and that suberythemal repeating doses of solar-simulating UV radiation (SSR) would produce photoadaptation to such inflammation. Separation-free high-sensitivity assays of CRP show an increase by 42% (P = 0.046) in CRP concentrations in healthy human subjects 24 h after a 3 minimal erythemal dose (MED) dose of UV-B delivered onto a 100 cm2 skin area. Preceding daily suberythemal doses of whole-body SSR for 10 or 30 consecutive days completely prevented the CRP increase. UV-B-induced skin erythema was partially attenuated by 30 preceding days of SSR only (P = 0.00066). After 10 daily SSR doses, the mean baseline CRP concentrations (0.24 +/- 0.21 mg/L) declined by 35% (P = 0.018). Using high-sensitivity analysis of serum CRP as the endpoint marker for cutaneous inflammation, we show that acute exposure of even a relatively small skin area to erythemal UV-B induces skin inflammation detectable also at the systemic level and that photoadaptation by preceding repeating suberythemal doses of SSR reduces signs of inflammation. Our data complement the view given by previous studies in that local photoadaptation also has systemic manifestations.     

Hierarchical Layer Engineering Using Supramolecular Double‐Comb Diblock Copolymers

The formation of unusual multilayered parallel lamellae‐in‐lamellae in symmetric supramolecular double‐comb diblock copolymers is presented. While keeping the concentration of surfactant fixed, the number of internal layers was found to increase with molecular weight M up to 34 for the largest block copolymer. The number of internal structures n was established to scale as M^0.67 and therefore enables easy design of such structures with great precision.     

Cellulose nanocrystal submonolayers by spin coating

Dilute concentrations of cellulose nanocrystal solutions were spin coated onto different substrates to investigate the effect of the substrate on the nanocrystal submonolayers. Three substrates were probed: silica, titania, and amorphous cellulose. According to atomic force microscopy (AFM) images, anionic cellulose nanocrystals formed small aggregates on the anionic silica substrate, whereas a uniform two-dimensional distribution of nanocrystals was achieved on the cationic titania substrate. The uniform distribution of cellulose nanocrystal submonolayers on titania is an important factor when dimensional analysis of the nanocrystals is desired. Furthermore, the amount of nanocrystals deposited on titania was multifold in comparison to the amounts on silica, as revealed by AFM image analysis and X-ray photoelectron spectroscopy. Amorphous cellulose, the third substrate, resulted in a somewhat homogeneous distribution of the nanocrystal submonolayers, but the amounts were as low as those on the silica substrate. These differences in the cellulose nanocrystal deposition were attributed to electrostatic effects: anionic cellulose nanocrystals are adsorbed on cationic titania in addition to the normal spin coating deposition. The anionic silica surface, on the other hand, causes aggregation of the weakly anionic cellulose nanocrystals which are forced on the repulsive substrate by spin coating. The electrostatically driven adsorption also influences the film thickness of continuous ultrathin films of cellulose nanocrystals. The thicker films of charged nanocrystals on a substrate of opposite charge means that the film thickness is not independent of the substrate when spin coating cellulose nanocrystals in the ultrathin regime (<100 nm).     

Transfer and storage of vortex states in light and matter waves

We theoretically explore the transfer of vortex states between atomic Bose-Einstein condensates and optical pulses using ultraslow and stopped light techniques. We find shining a coupling laser on a rotating two-component ground state condensate with a vortex lattice generates a probe laser field with optical vortices. We also find that optical vortex states can be robustly stored in the atomic superfluids for times, in Rb-87 condensates, limited only by the ground state coherence time.     

Classification of Graeco‐Latin Cubes

A q‐ary code of length n, size M, and minimum distance d is called an code. An code with is said to be maximum distance separable (MDS). Here one‐error‐correcting () MDS codes are classified for small alphabets. In particular, it is shown that there are unique (5, 5³, 3)₅ and (5, 7³, 3)₇ codes and equivalence classes of (5, 8³, 3)₈ codes. The codes are equivalent to certain pairs of mutually orthogonal Latin cubes of order q, called Graeco‐Latin cubes.     

The Formation of Porous Membranes by Filtration of Aerosol Nanoparticles

Flame-generated aerosol particles of Al₂O₃ were deposited by gas filtration on two types of porous and ceramic tubes of -Al₂O₃ with mean pore diameters of 450 and 2700nm, respectively. The particles were aggregates with average mobility diameters in the range of 30–100nm and primary particle diameters of 4–8nm. The particles are characterized by differential mobility analysis, transmission electron microscopy, and by their specific surface area. The deposited membranes are characterized by gas permeability measurements, scanning electron microscopy, and by their pore size distribution from nitrogen capillary condensation. The particles form a distinct, homogeneous membrane layer with a porosity of 90% on top of the substrate surface and only penetrate slightly into the substrate structure. The mean pore sizes of the deposited membranes determined by nitrogen condensation agree approximately with those determined by gas permeation and the specific surface area. The mean pore diameter varies in the range of 30–70nm. The gas permeability of the deposited membranes is related to the specific surface area but influenced by the high porosity. The mean pore size and the permeability of the membranes are almost independent of the substrate structure.The development of a membrane with uniform properties is preceded by a short initial period in which the deposited particles, with an equivalent membrane thickness of roughly 2m, have a significantly lower permeability than the ultimately developed uniform membrane layer. This effect is particularly significant for the aerosol particles with the lowest mean size, probably due to particles deposited in the pore mouths of the substrate.The particles and the deposited membranes are X-ray amorphous but retain their specific surface area on heating to even high temperatures. When the membranes are heated to 1473K for 10h, X-ray diffraction shows a mixture of - and -alumina, accompanied by a partial disintegration of the membrane and a considerable loss of surface area.     

7‐(2‐Oxoalkoxy)coumarins: Synthesis and Anti‐Inflammatory Activity of a Series of Substituted Coumarins

A series of 7‐(2‐oxoalkoxy)coumarins have been synthesized by conjugating substituted 7‐hydroxycoumarins with different chloroketones. The anti‐inflammatory properties of 7‐(2‐oxoalkoxy)coumarins were studied in LPS‐induced inflammatory response in J774 macrophages. Western blot was used to determine the expression of iNOS and COX‐2, NO was determined by measuring its metabolite nitrite by Griess reaction and IL‐6 was measured by ELISA. Seventeen of the studied compounds inhibited NO and IL‐6 production over 50% at 100 μM concentrations. IC₅₀ values of the best inhibitors were 21 μM/24 μM (NO/IL‐6) for compound 12 and 30 μM/10 μM (NO/IL‐6) for compound 20 . The main result was that the substitution with 7‐(2‐oxoalkoxy) group improved the anti‐inflammatory properties of most of the investigated 7‐hydroxycoumarins.     

Water stability of a cheap sol-gel-based adhesive

The humidity and water tolerance of a sol-gel derived binder prepared using a cheap, multicomponent precursor has been studied. The sol was prepared by dissolving the precursor in water under acidic conditions using either formic acid or a mixture of formic acid and citric acid for pH adjustments. It is shown that a post-treatment temperature of 400 °C or higher is needed in order to achieve full binder stability under excess water conditions, as thermal decomposition of metal carboxylates leads to a pronounced decrease in water solubility of the gels. The mesoporous gel can be made hydrophobic by post-treatments with either a silane or an organophosphonate, showing that both silica and metal oxides are exposed on the surface of the binder. Surface functionalization is especially effective for gels heat-treated at higher temperatures where the metal carboxylates have decomposed to the corresponding oxides or carbonates. The results are expected to be of great importance for the use of this cheap binder in large scale industrial applications. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.