Elastic properties of GaxIn1−xP semiconductor

A theoretical procedure is presented for the study of elastic properties of the ternary alloy Ga_xIn_1−xP. The calculations are based on the pseudopotential formalism in which local potential coupled with the virtual crystal approximation (VCA) is applied to evaluate elastic constants c₁₁, c₁₂ and c₄₄, bulk modulus, shear modulus, Young's modulus and Poisson's ratio for the entire range of the alloy composition x of the ternary alloy Ga_xIn_1−xP. The effect of compositional disorder is included. Our results for parent compounds are compared to experimental and other theoretical calculations and showed generally good agreement. The inclusion of compositional disorder increases values of all elastic constants. During the present study it is found that elastic constant c₁₁ is largely influenced by compositional disorder.     

Oxidation kinetics of thin copper films and wetting behaviour of copper and Organic Solderability Preservatives (OSP) with lead-free solder

The oxide formation on thin copper films deposited on Si wafer was studied by XPS, SEM and Sequential Electrochemical Reduction Analysis SERA. The surfaces were oxidized in air with a reflow oven as used in electronic assembly at temperatures of 100 °C, 155 °C, 200 °C, 230 °C and 260 °C. The SERA analyses detected only the formation of Cu₂O but the XPS analysis done for the calibration of the SERA equipment proved also the presence of a CuO layer smaller than 2 nm above the Cu₂O oxide. The oxide growth follows a power-law dependence on time within this temperature range and an activation energy of 33.1 kJ/mol was obtained. The wettability of these surfaces was also determined by measuring the contact angle between solder and copper substrate after the soldering process. A correlation between oxide thickness and wetting angle was established. It was found that the wetting is acceptable only when the oxide thickness is smaller than 16 nm. An activation energy of 27 kJ/mol was acquired for the spreading of lead free solder on oxidized copper surfaces.From wetting tests on copper surfaces protected by Organic Solderability Preservatives (OSP), it was possible to calculate the activation energy for the thermal decomposition of these protective layers.     

Arbitrage without borrowing or short selling?

We show that a trader, who starts with no initial wealth and is not allowed to borrow money or short sell assets, is theoretically able to attain positive wealth by continuous trading, provided that she has perfect foresight of future asset prices, given by a continuous semimartingale. Such an arbitrage strategy can be constructed as a process of finite variation that satisfies a seemingly innocuous self-financing condition, formulated using a pathwise Riemann–Stieltjes integral. Our result exemplifies the potential intricacies of formulating economically meaningful self-financing conditions in continuous time, when one leaves the conventional arbitrage-free framework.     

Gold nanoparticle-decorated keggin ions/TiO2 photococatalyst for improved solar light photocatalysis

We demonstrate a facile localized reduction approach to synthesizing a Au nanoparticle-decorated Keggin ion/TiO(2) photococatalyst for improved solar light photocatalysis application. This has been achieved by exploiting the ability of TiO(2)-bound Keggin ions to act as a UV-switchable, highly localized reducing agent. Notably, the approach proposed here does not lead to contamination of the resultant cocatalyst with free metal nanoparticles during aqueous solution-based synthesis. The study shows that for Keggin ions (phosphotungstic acid, PTA), being photoactive molecules, the presence of both Au nanoparticles and PTA on the TiO(2) surface in a cocatalytic system can have a dramatic effect on increasing the photocatalytic performance of the composite system, as opposed to a TiO(2) surface directly decorated with metal nanoparticles without a sandwiched PTA layer. The remarkable increase in the photocatalytic performance of these materials toward the degradation of a model organic Congo red dye correlates to an increase of 2.7-fold over that of anatase TiO(2) after adding Au to it and 4.3-fold after introducing PTA along with Au to it. The generalized localized reduction approach to preparing TiO(2)-PTA-Au cocatalysts reported here can be further extended to other similar systems, wherein a range of metal nanoparticles in the presence of different Keggin ions can be utilized. The composites reported here may have wide potential implications toward the degradation of organic species and solar cell applications.     

Chemical compositions of the rhizome oils of two Alpinia species of Malaysia

The essential oils obtained by hydrodistillation of the rhizomes of Alpinia aquatica Rosc. syn. Alpinia melanocarpa and Alpinia malaccensis Roscoe were analysed by capillary gas chromatography and gas chromatography-mass spectrometry. Eighteen compounds, representing 98.4% of the essential oil were identified in A. aquatica rhizome oil, with β-sesquiphellandrene in 36.5% being the major constituent, while 20 compounds representing 99.7% of the rhizome oil of A. malaccensis were identified, among which methyl (E)-cinnamate (78.2%) was the major constituent.     

Simulation metamodeling with dynamic Bayesian networks

This paper presents a novel approach to simulation metamodeling using dynamic Bayesian networks (DBNs) in the context of discrete event simulation. A DBN is a probabilistic model that represents the joint distribution of a sequence of random variables and enables the efficient calculation of their marginal and conditional distributions. In this paper, the construction of a DBN based on simulation data and its utilization in simulation analyses are presented. The DBN metamodel allows the study of the time evolution of simulation by tracking the probability distribution of the simulation state over the duration of the simulation. This feature is unprecedented among existing simulation metamodels. The DBN metamodel also enables effective what-if analysis which reveals the conditional evolution of the simulation. In such an analysis, the simulation state at a given time is fixed and the probability distributions representing the state at other time instants are updated. Simulation parameters can be included in the DBN metamodel as external random variables. Then, the DBN offers a way to study the effects of parameter values and their uncertainty on the evolution of the simulation. The accuracy of the analyses allowed by DBNs is studied by constructing appropriate confidence intervals. These analyses could be conducted based on raw simulation data but the use of DBNs reduces the duration of repetitive analyses and is expedited by available Bayesian network software. The construction and analysis capabilities of DBN metamodels are illustrated with two example simulation studies.     

Oxidation of bismuth nanodroplets deposit on GaAs substrate

Bismuth nanodroplets on GaAs substrate were obtained by metalorganic vapor phase epitaxy (MOVPE). New products have been synthesized when Bi nanodroplets are heated under oxygen atmosphere. The oxidation process of Bi nanodroplets consists of a heating from the room temperature to different oxidation temperatures (350, 500, 600 ^°C) with a temperature rate of 14 ^°C/min. The annealing duration was fixed to 30 min. The presence of oxygen in the products was confirmed by energy dispersive X-ray (EDX) measurements using a scanning electron microscope (SEM). SEM images show that Bi microcomposites density decrease and their size increases with increasing annealing temperature. After X-ray diffraction analysis of the products no obvious peaks could be observed. The reflectance spectra of the products were studied in spectral domains ranged from 200 nm to 1100 nm. By fitting the reflectivity signal, we extracted the thickness of the products and their refractive index variation versus wavelength. The results show that the thickness of the samples increases with increasing annealing temperature. The photoluminescence (PL) spectra under excitation at 325 nm shows a broad emission centered at around 1.92 eV.     

Thermodynamic analysis of Si doping in GaN

Equilibrium calculations of Si-doping in GaN are investigated using the Gemini code. The method of the calculation is based on the minimisation of the Gibbs free energy. Experimental growth conditions are used for the calculation. The variables are the amount of the dopant and the temperature. The results show the formation of a solid Si₃N₄ compound with a certain quantity of the input SiH₄, that is the silicon precursor in our MOVPE system. Si₃N₄ formation can explain the limitation of Si incorporation and the surface roughening as revealed by MOVPE Si doped layers.     

Asphericity in the Fermi Surface and Fermi Energy of Na-K, Na-Rb and Na-Cs Binary Alloys

Detailed theoretical investigations into asphericity in the Fermi surface (FS) and Fermi energy (FE) ofNa1_xKx, Na1_xRbx, and Na1_xCsx binary solid solutions are carried out for the first time. The alloying behavior ofthe K, Rb, and Cs with the Na generates the Fermi surface distortion (FSD) of bce simple metals. The FS of Na-K,Na-Rb, and Na-Cs solid solution is a distorted sphere with the largest deviation along [110]. We have found that theimpact of local-field correction function on FSD is maximun at [100] point and minimum at [111] point. The exchangeand correlation effect is found to suppress the value of FE.     

Ozone etching of a highly asymmetric triblock copolymer with a majority polydiene component

The ozone etching of thin films of a commercial polystyrene-polyisoprene-polystyrene (PS-PI-PS) triblock copolymer (Vector 4111) was studied using atomic force microscopy (AFM) and ellipsometry. The major phase of the copolymer consists of PI (82 wt.%) and the copolymer forms a cylindrical structure upon annealing. Moderate ozone doses (1.4% wt/wt) were used to etch the copolymer. This revealed two stages of the ozonation: rapid etching of the PI fragments followed by slow compacting of the remaining PS cylinders. Under certain conditions ozone treatment results in the formation of nanosized grooves in a PS matrix which is suitable for lithographic processes.