Novel Copolymers of Styrene and Alkoxy Ring‐Substituted 2‐Cyano‐N,N‐Dimethyl‐3‐Phenyl‐2‐Propenamides

Electrophilic trisubstituted ethylene monomers, alkoxy ring‐substituted 2‐cyano‐N,N‐dimethyl‐3‐phenyl‐2‐propenamides, RC₆H₄CH?C(CN)CON(CH₃)₂ (where R is 2‐OCH₃, 3‐OCH₃, 4‐OCH₃, 2‐OCH₂CH₃, 3‐OCH₂CH₃, 4‐OCH₂CH₂CH₃, 4‐OCH₂CH₂CH₂CH₃), were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and N,N‐dimethyl cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ACBN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 300–450°C range.     

Mechanistic investigation and DFT calculation of the new reaction between S-methylisothiosemicarbazide and methyl acetoacetate

A study on the synthesis and mechanistical aspects of formation of 3-methyl-5-oxo-3-pyrazolin-1-carboxamide (MOPC) starting from S-methylisothiosemicarbazide hydrogen iodide and methyl acetoacetate was performed. In the alkaline aqueous solution, the intermediate methyl acetoacetate S-methylisothiosemicarbazone undergoes substitution of CH₃S^? anion by hydroxide anion, cyclization, carbanion formation, and elimination of methanol, thus yielding corresponding Na-enolate salt of pyrazol-5-one derivative. The structure of the compound obtained after protonation of the formed enolate salt was determined by means of spectroscopic techniques and single-crystal X-ray diffraction analysis. The mechanism of conversion of methyl acetoacetate S-methylisothiosemicarbazone into MOPC was investigated by means of the B3LYP functional, and it was found that the reaction is thermodynamically controlled.     

Quantitation of perfluoroalkyl acids,parabens and cotinine from single low volume serum sample by validated analytical method

ABSTRACT

In this paper, we present the results of an analytical method that has been recently developed, validated and successfully applied in a biomonitoring approach. In the environmental pollutant studies it is desirable that the analytical method can determine multiple classes of compounds from a single, small volume sample. The presented analytical method with a simple sample pre-treatment allows the quantitation of 13 perfluoroalkyl acids (PFAAs), 6 parabens and cotinine (used as nicotine biomarker) from a single, small volume of 100 µL serum sample by liquid chromatography-triple quadrupole mass spectrometer (LC-MS/MS). The limits of quantitation (LOQ) for PFAAs, parabens and cotinine were 0.10–0.50, 0.20–0.80 and 0.10 ng/mL, respectively. Besides sensitivity the method has excellent trueness/accuracy and repeatability. The trueness of the method for the determination of PFAAs ranged from 95% to 106% and the repeatability (as RSD %) from 0.6% to 5.6%. The accuracy and RSD for parabens were 73–120% and 1.3–9.7%, respectively, and 100–106% and 1.3–3.5 % for cotinine. Biomonitoring data reveals the presence of several PFAAs and parabens in serum samples of Finnish population. The total concentrations for PFAAs and parabens were from 2.0 to 33 ng/mL and from <LOQ to 1100 ng/mL, respectively. Nearly all non-smokers had the serum cotinine concentration below 1.0 ng/mL, which can be suggested as the cut point for cotinine concentration to identify smoking.     

Monitoring bisphenol A and estrogenic chemicals in thermal paper with yeast-based bioreporter assay

Bioluminescent Saccharomyces cerevisiae yeast-based bioreporters were used to monitor bisphenol A and other estrogenic chemicals in thermal paper samples collected mainly from Finland on two occasions in 2010/2011, and 2013. The bisphenol A-targeted (BPA-R) and the human oestrogen receptor (hERα) bioreporters were applied to analyse both non-treated and extracted paper samples. Bisphenol A was readily bioavailable to the yeast bioreporters on the non-treated paper samples without any pre-treatment. Detected concentrations ranged from a detection limit of 9–142 μg/g to over 20 mg/g of bisphenol A equivalents in the thermal papers. Low bisphenol A like activities were detected in many samples, and were considered to be caused by residual bisphenol A or other types of bisphenols, such as bisphenol S. Most of the thermal paper samples were toxic to the yeast bioreporters. The toxicity did not, however, depend on the bisphenol A concentration of the samples. The yeast bioreporters were demonstrated to be a robust and cost-efficient method to monitor thermal paper samples for their bisphenol A content and estrogenicity. Thermal paper was considered as a potential BPA source for both human exposure and environmental emission.     

Schatten class Toeplitz operators on generalized Fock spaces

In this paper we characterize the Schatten p   class membership of Toeplitz operators with positive measure symbols acting on generalized Fock spaces for the full range 0<p<∞$0<p<\infty$.     

Kinetics and particle size control in non-stirred precipitation polymerization of N-isopropylacrylamide

A novel non-stirred precipitation polymerization for rapid small-scale synthesis of monodisperse temperature-sensitive poly(N-isopropylacrylamide) microgels is introduced. A practical framework for the final particle size control is established, and low-temperature synthesis is highlighted as an easy alternative for producing large particles in contrast to the temperature ramp method. Furthermore, in situ 3D-DLS method is used to determine the kinetic rate law of the precipitation polymerization of N-isopropylacrylamide. The power law exponents for the reaction are determined to be 0.97?±?0.12 and 0.46?±?0.01 for the monomer and the initiator concentration, respectively. In conjunction with other evidence, it is suggested that the reaction follows conventional radical polymerization kinetics and takes place in the continuous phase. Number concentration of particles in the batch is recognized to be the determining factor for the final particle volume of the microgels.     

Physical characterization of a new composition of oxidized zirconium-2.5 wt% niobium produced using a two step process for biomedical applications

Zirconium and particularly Zr-2.5 wt%Nb (Zr2.5Nb) alloy are useful for engineering bearing applications because they can be oxidized in air to form a hard surface ceramic. Oxidized zirconium (OxZr) due to its abrasion resistant ceramic surface and biocompatible substrate alloy has been used as a bearing surface in total joint arthroplasty for several years. OxZr is characterized by hard zirconium oxide (oxide) formed on Zr2.5Nb using one step thermal oxidation carried out in air. Because the oxide is only at the surface, the bulk material behaves like a metal, with high toughness. The oxide, furthermore, exhibits high adhesion to the substrate because of an oxygen-rich diffusion hardened zone (DHZ) interposing between the oxide and the substrate.In this study, we demonstrate a two step process that forms a thicker DHZ and thus increased depth of hardening than that can be obtained using a one step oxidation process. The first step is thermal oxidation in air and the second step is a heat treatment in vacuum. The second step drives oxygen from the oxide formed in the first step deeper into the substrate to form a thicker DHZ. During the process only a portion of the oxide is dissolved. This new composition (DHOxZr) has approximately 4-6 μm oxide similar to that of OxZr. The nano-hardness of the oxide is similar but the DHZ is approximately 10 times thicker. The stoichiometry of the oxide is similar and a secondary phase rich in oxygen is present through the entire thickness. Due to the increased depth of hardening, the critical load required for the onset of oxide cracking is approximately 1.6 times more than that of the oxide of OxZr. This new composition has a potential to be used as a bearing surface in applications where greater depth of hardening is required.