Sandwich structures at oil-water interfaces under alkaline conditions

Equilibrium liquid crystal (LC) layer on an interface between crude oils and water was observed at high pH. This layer is composed mainly of sodium naphthenates produced in situ at the water/oil interface. Transient LC layer was also evolved at the interface of aqueous phase of sodium hydroxide solutions and oleic phase of naphthenic acid (NA) solutions as result of a chemical reaction between NaOH and NA. This chemical reaction causes transport process resulting in a disturbance of the interface. Optical observation of this interface disturbance reviled that the interface covered with LC shows considerably lower flexibility as compared to LC free interface. The LC layer eventually dissolves in the water phase at low oil-to-water ratio, while at high oil-to-water ratio it can form an equilibrium phase, which spreads spontaneously at the oil-water interface.     

Zur entmischung der Lösungsmittel bei der chromatographischen trennung—v: Sorption von fliessmitteldämpfen an cellulose

The sorption of solvent vapours onto dried cellulose has been investigated. The time-dependence and the effect of the solvent-water ratio is discussed. The studies concerned the properties of methanol, ethanol, propanol and butanol.     

Secondary kinetic isotope effects: Deuterium abstraction by chlorine atoms from the CD3 group in CD3CH2Cl,CD3CHDCl,and CD3CD2Cl

The occurrence and magnitude of secondary kinetic isotope effects in the gas phase has been determined for deuterium abstraction from the CD₃ group in CD₃CH₂Cl, CD₃CHDCl, and CD₃CD₂Cl by photochemically generated ground-state chlorine atoms. Over the temperature range 10–94°C a discernible “inverse” kinetic isotope effect is observed. Both the pre-exponential factors and activation energies decrease with deuterium substitution in the vicinal chloromethyl group. The opposing trends result in a net effect close to unity.     

The fluorescence quenching rate constant for the distance-dependent quenching processes in the presence of diffusion

It is shown that the fluorescence quenching constant is given by the Laplace transform of the time-dependent bimolecular rate constant k(t). The dependence of the quenching rate constant on the transformation parameter can be obtained from measurements of the fluorescence decay functions and a Stern-Volmer-type analysis in the Laplace domain. The advantages of this type of investigation of the quenching rate function are demonstrated by a numerical calculation for the distance-dependentquenching process in     

An empirical force field. II. Crystalline alkanes

The EFF'93 force field is used to study crystalline alkanes. In addition to detailed molecular geometries, the sublimation enthalpy, heat capacity, and lattice vibrations for a number of saturated hydrocarbons are reported and compared with experiment. © 1995 by John Wiley & Sons, Inc.     

Determination of calcium in silicate rocks by potentiometric titration with ethyleneglycol-bis-(2-Aminoethylether)tetraacetic acid and a calcium-selective electrode

The method reported for the determination of calcium in silicate rocks involves titration with ethyleneglycol-bis(2-aminoethylether)tetraacetic acid (EGTA) to a potentiometric end-point. A Crytur calcium-selective electrode is used; the selectivity constants (K_ca,x) are less than 10^-3 for Mg, Ba, Sr, K and Na. The method can be used for calcium contents of 2% or higher (and exceptionally for lower contents), in the presence of up to 60% Mg, 33% AI, 17% Fe, 5% Ba, 5% Ti, and 2.5% Mn. Al, Fe and Ti are masked with sulphosalicylic acid, barium is precipitated as its sulphate, and manganese is bound as its cyanide complex. If the magnesium content is less than that of calcium, EDTA can be used as titrant, magnesium being masked with acetylacetone.     

Hydrogen bond studies: 80. A deuteron magnetic resonance and infrared spectroscopic study of the water molecule in lithium formate monohydrate,LiHCOO · H2O

A deuteron magnetic resonance and infrared study of the water molecules in lithium formate monohydrate, LiHCOO · H₂O, has been made. The quadrupole coupling constants (e²qQ/h) and asymmetry parameters (η) were found to be 198.7±0.4 and 231.3±0.6 kHz, and 0.060±0.005 and 0.097±0.003, respectively, at 25 ° C.An interpretation is given of the infrared spectra in the OH-stretching region in terms of intra- and intermolecular couplings of the water molecules. It is found that the water molecules are vibrationally distorted by their environments such that the OH-stretching modes consist of independent stretchings of the two O-H bonds.     

Studies on the photooxidation mechanism of polymers. IV. Effect of ultraviolet light (2537 Å) on solid PVC particles suspended in different liquids

The photolysis of virgin PVC powder suspended in water, methanol, n-hexane, aqueous NH₄OH (30 wt-%), and 0.1 wt-% iodine in methanol and also as dry powder was studied. The mechanism of photolysis of PVC powder has been investigated by using ESR spectroscopy, conductivity titration, gel-permeation chromatography (GPC), and absorption spectroscopy. Photolysis of PVC has been found to occur by a free-radical mechanism. ESR spectroscopy permits a partial identification of several different types of free radicals in PVC such as alkyl, polyenyl, and peroxy radicals. An interpretation is proposed of the mechanism of formation of conjugated polyene structures, and also a new explanation of the crosslinking mechanism, in which transfer of unpaired electrons to double bonds occurs, is suggested. It has also been found that conjugated double bonds can photosensitize free-radical formation as a result of increased ultraviolet absorption due to polyene structures.     

Asymptotic and exponential decay in mean square for delay geometric Brownian motion

Applications of Mathematics - We derive sufficient conditions for asymptotic and monotone exponential decay in mean square of solutions of the geometric Brownian motion with delay. The conditions...     

A heuristic method for dispatching repair men

A company has to provide service to its customers. A service consists of a visit to the customer plus the spending of some given time at the scene. The future customer demand is not known but the probability distribution for the demand may be known. When a customer call comes in, the company must immediately specify a time window within which the start of service will be provided. The problem is for a fixed service level to determine an optimal strategy of route design and time window setting so that the total distance travelled is minimized over the time horizon given. A heuristic method BARTOC (Booking Algorithm for Routing and Timing Of Customers) to solve the problem mentioned above is suggested. BARTOC is based on a cluster-first route-second approach. Some computational results are presented. The results indicate that BARTOC produces high quality solutions.Peter Matthiesen, Inc.Dano Chemo, Inc.