SiOx precipitate composition in Si,revisited: Discussion closed?

The composition SiO_x of oxide precipitates in Si has been discussed for the past thirty years with experimentally estimated x ‐values ranging between 1 and 2. It is shown that this spread of x ‐values can be explained by calculating the average composition taking into account temperature and anneal time dependent size and shape of the precipitates and the limitations and probing volumes of the various characterization techniques. Hereby it is assumed that the oxygen‐rich (SiO₂?) core of the precipitates is surrounded by a 2 nm thin SiO layer as revealed by recent electron energy loss spectroscopy analyses. For plate‐like precipitates thinner than and for octahedral precipitates smaller than 6 nm, x ≈ 1. For larger precipitates, the central part of the precipitate consists of SiO_x with x close to 2 and the precipitate has an average x between 1 and 1.3 for plate‐like and up to 1.9 for octahedral precipitates. The predicted x ‐values for different precipitate sizes and morphologies, are compared with published experimental data. SiO_x precipitate nucleation and initial growth should be simulated assuming x = 1 and Fourier transform infrared spectra of precipitates assuming a mixture of SiO₂ and amorphous Si. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Can 2‐acylpyrroles form an intramolecular hydrogen bond?

The formation of intramolecular hydrogen bonding by certain N‐substituted 2‐acylpyrroles has been demonstrated by B3LYP/aug‐cc‐pVDZ calculations, the quantum theory of atoms in molecules, and the natural bond orbital method. Total electron energy densities H_BCP at the bond critical point of the H?O bond were applied to analyze the strength of these interactions. The relations between quantum theory of atoms in molecules, carbonyl stretching vibrational modes ν_{C = O}, and natural bond orbital parameters associated with the formation of the C–H?O interaction have been established. The short contacts were found experimentally in the crystal structure of a new 2‐acylpyrrole derivative 5‐chloro‐2‐oxopentyl‐1‐(5‐chloro‐2‐oxopentyl)pyrrolo‐2‐carboxylate. The influence of 2‐ and N‐substitution of 2‐acylpyrroles on C‐H?O interaction energy is discussed. It was found that the methylene group may act as a proton donor leading to a red‐shift or blue‐shift phenomenon of the ν_C–H stretching mode. Copyright © 2015 John Wiley & Sons, Ltd.     

Assessment of the various ionization methods in the analysis of metal salen complexes by mass spectrometry

Metal salen complexes are one of the most frequently used catalysts in enantioselective organic synthesis. In the present work, we compare a series of ionization methods that can be used for the mass spectral analysis of two types of metalosalens: ionic complexes (abbreviated as Com⁺X^?) and neutral complexes (NCom). These methods include electron ionization and field desorption (FD) which can be applied to pure samples and atmospheric pressure ionization techniques: electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) which are suitable for solutions. We found that FD is a method of choice for recording molecular ions of the complexes containing even loosely bonded ligands. The results obtained using atmospheric pressure ionization methods show that the results depend mainly on the structure of metal salen complex and the ionization method. In ESI spectra, Com⁺ ions were observed, while in APCI and APPI spectra both Com⁺ and [Com + H]⁺ ions are observed in the ratio depending on the structure of the metal salen complex and the solvent used in the analysis. For complexes with tetrafluoroborate counterion, an elimination of BF₃ took place, and ions corresponding to complexes with fluoride counterion were observed. Experiments comparing the relative sensitivity of ESI, APCI and APPI (with and without a dopant) methods showed that for the majority of the studied complexes ESI is the most sensitive one; however, the sensitivity of APCI is usually less than two times lower and for some compounds is even higher than the sensitivity of ESI. Both methods show very high linearity of the calibration curve in a range of about 3 orders of magnitude of the sample concentration. Copyright © 2014 John Wiley & Sons, Ltd.     

Theoretical studies of electronic structure and structural properties of anhydrous alkali metal oxalates

The theoretical analysis of electronic structure and bonding properties of anhydrous alkali metal oxalates, based on the results of DFT FP-LAPW calculations, Bader’s QTAIM topological properties of electron density, Cioslowski and Mixon’s topological bond orders [reported in the first part of this paper by Kole?yński (doi:10.1007/s10973-013-3126-z)] and Brown’s Bond Valence Model calculations, carried out in the light of thermal decomposition pathway characteristic for these compounds are presented. The obtained results shed some additional light on the origins of the complex pathway observed during thermal decomposition process (two stage process, first the formation of respective carbonate and then decomposition to metal oxide and carbon dioxide). For all structures analyzed, strong similarities in electronic structure and bonding properties were found (ionic-covalent bonds in oxalate anion with C–C bond as the weakest one in entire structure and almost purely ionic between oxalate group and alkali metal cations), allowing us to propose the most probable pathway consisting of consecutive steps, leading to carbonate anion formation with simultaneous cationic sublattice relaxations, which results in relative ease of respective metal carbonate formation.     

Influence of cooling rate on crystallisation kinetics on microstructure of cast zinc alloys

In this study, the change of the cooling rate in the range of about 0.1–1 °C s^?1 and the addition of Sr on the crystallization kinetics of the cast zinc alloys of the ZnAlCu type, as well as its relation to the microstructure were also investigated. Therefore, the aim of the rapid crystallisation is the achievement of materials with better properties, which can be obtained by refinement of the dendritic or eutectic microstructure, elimination of segregation, or creation of metastable phases and their morphology changes. In the investigated alloys, the change of cooling rate of 1 °C s^?1 has caused microstructure’s refinement as well as increase in hardness. Increase in the cooling rate causes also morphology changes of the η + α eutectic, and makes generally a global overcooling of the alloy as well as change in the temperatures at the beginning of crystallization T _DN and of the alloy crystallization T _S. The presented investigations concerning the electron microscopy methods, including transmission electron microscopy, allow revealing the crystallographic structure, based on the d-spacing changes, as well as the diffraction method used for phase determination, which is a helpful tool for the explanation of the important points in the thermo-derivative analysis curve, where the relation between the amount of phase and the occurrence of new phases can be determined.     

The excess current in cyclic voltammetry arising from the presence of an electrode edge

The popular inlaid disc electrode suffers from an edge effect that is usually, and sometimes unwarrantedly, ignored in analyzing transient voltammograms. This study addresses the role played by the edge in linear scan and cyclic voltammetries when the electron transfer is reversible or quasi-reversible. A simulation models the concentrations, current densities and currents in two circumstances—when the edge in important and when it is absent—simultaneously, and thereby the evolving edge current is quantified. Special attention is paid to the effect that the edge has on the heights and positions of the voltammetric peaks. It is demonstrated that disregarding the edge may lead to the bogus classification of a reversible electrode reaction as quasi-reversible.     

Robust Inclusion Complexes of Crown Ether Fused Tetrathiafulvalenes with Li+@C60 to Afford Efficient Photodriven Charge Separation

Inclusion complexes of benzo‐ and dithiabenzo‐crown ether functionalized monopyrrolotetrathiafulvalene (MPTTF) molecules were formed with Li⁺@C₆₀ ( 1? Li⁺@C₆₀ and 2? Li⁺@C₆₀). The strong complexation has been quantified by high binding constants that exceed 10⁶ M ^?1 obtained by UV/Vis titrations in benzonitrile (PhCN) at room temperature. On the basis of DFT studies at the B3LYP/6‐311G(d,p) level, the orbital interactions between the crown ether moieties and the π surface of the fullerene together with the endohedral Li⁺ have a crucial role in robust complex formation. Interestingly, complexation of Li⁺@C₆₀ with crown ethers accelerates the intersystem crossing upon photoexcitation of the complex, thereby yielding ³(Li⁺@C₆₀)*, when no charge separation by means of ¹Li⁺@C₆₀* occurs. Photoinduced charge separation by means of ³Li⁺@C₆₀* with lifetimes of 135 and 120 μs for 1? Li⁺@C₆₀ and 2? Li⁺@C₆₀, respectively, and quantum yields of 0.82 in PhCN have been observed by utilizing time‐resolved transient absorption spectroscopy and then confirmed by electron paramagnetic resonance measurements at 4 K. The difference in crown ether structures affects the binding constant and the rates of photoinduced electron‐transfer events in the corresponding complex.