Determination of some hydroxycholesterols in human serum samples

The simultaneous determination of some hydroxycholesterols in human serum samples is described. The procedure is based on hydrolysis and extraction of these compounds in serum samples, followed by removal of especially cholesterol (making use of reversed-phase high-performance liquid chromatography) and derivatization of the purified compounds to their trimethylsilyl ethers and subsequent gas chromatography using flame ionization detection. Serum levels of 7 alpha-hydroxycholesterol, 7 beta-hydroxycholesterol and 26-hydroxycholesterol were determined in several groups of patients: normals, untreated patients suffering from cerebrotendinous xanthomatosis, patients suffering from cerebrotendinous xanthomatosis and treated with either chenodeoxycholic acid or cholic acid in an effective dose, patients suffering from cerebro-hepato-renal syndrome, patients suffering from hypercholesterolemia and treated with cholestyramine for prolonged periods and one patient presumed to be suffering from an inborn error of metabolism in bile acid synthesis. It can be concluded that the 7 alpha-hydroxycholesterol concentration in serum is a good parameter for establishing disorders involving the metabolic conversion of 7 alpha-hydroxycholesterol towards bile acids. In addition, 26-hydroxycholesterol levels in patients suffering from cerebrotendinous xanthomatosis are beyond detectable limits, even during treatment with bile acids in an effective dose, whereas in all other conditions this compound is substantially present.     

Electrospraying: an in-situ polymerisation route for fabricating high macroporous scaffolds

This paper reports a direct jet-based polymerisation by polycondensation approach to forming a self-supporting scaffold structure. The processing technique is electrospraying, which is also known as electrohydrodynamic atomization. A specially formulated ethanolic siloxane sol derived from alkoxysilanes was synthesised and electrosprayed using a ring-shaped ground electrode configuration. The medium was seen to electrospray in the stable cone-jet mode, which later gave rise to the growing or forming of “fir-tree” like structures. The materials were characterised using microscopy, solid state NMR, FTIR, XRD and DSC. Hence this paper explains the direct controlled polycondensation from the siloxane sol and further presents the basis by which these scaffolds take shape.     

Cardy's formula for some dependent percolation models

We prove Cardy's formula for rectangular crossing probabilities in dependent site percolation models that arise from a deterministic cellular automaton with a random initial state. The cellular automaton corresponds to the zero-temperature case of Domany's stochastic Ising ferromagnet on the hexagonal lattice  (with alternating updates of two sublattices) [7]; it may also be realized on the triangular lattice 𝕋 with flips when a site disagrees with six, five and sometimes four of its six neighbors. Received: 24 December 2001     

Computation of Autocorrelations of Interdeparture Times by Numerical Transform Inversion

The generating function of the autocorrelations of the interdeparture times in stationary M/G/1 and GI/M/1 systems involves the probability generating function of the number of customers served in a busy period. The latter function is implicitly determined as a solution to a functional equation. Standard methods for the numerical inversion of generating functions require the values of these functions at many complex arguments. A recently discovered substitution method for contour integrals allows the numerical inversion of implicitly determined generating functions without the numerical solution of the functional equations.     

An improved injector bunching geometry for ATLAS

The bunching system of the ATLAS positive ion injector (PII) has been improved by relocating the harmonic buncher to a point significantly closer to the second stage sine-wave buncher and the injector LINAC. The longitudinal optics design has also been modified and now employs a virtual waist from the harmonic buncher feeding the second stage sine-wave buncher. This geometry improves the handling of space charge for high-current beams, significantly increases the capture fraction into the primary rf bucket and reduces the capture fraction of the unwanted parasitic rf bucket. Total capture and transport through the PII has been demonstrated as high as 80% of the injected dc beam while the population of the parasitic, unwanted rf bucket is typically less than 3% of the total transported beam. To remove this small residual parasitic component a new traveling-wave transmission-line chopper has been developed reducing both transverse and longitudinal emittance growth from the chopping process. This work was supported by the U.S. Department of Energy under contract W-31-109-ENG-38.     

Structural and lithium intercalation studies of Mn(0.5−x)CaxTi2(PO4)3 phases (0≤x≤0.50)

Materials from the Mn_(0.5−x)Ca_xTi₂(PO₄)₃ (0≤x≤0.50) solid solution were obtained by solid-state reaction in air at 1000 °C. Selected compositions were investigated by powder X-ray diffraction analysis, ³¹P nuclear magnetic resonance (NMR) spectroscopy and electrochemical lithium intercalation. The structure of all samples determined by Rietveld analysis is of the Nasicon type with the R space group. Mn²⁺/Ca²⁺ ions occupy only the M1 sites in the Ti₂(PO₄)₃ framework. The divalent cations are ordered in one of two M1 sites, except for the Mn_0.50Ti₂(PO₄)₃ phase, where a small departure from the ideal order is observed by XRD and ³¹P MAS NMR. The electrochemical behaviour of Mn_0.50Ti₂(PO₄)₃ and Mn_(0.5−x)Ca_xTi₂(PO₄)₃ phases was characterised in Li cells. Two Li ions can be inserted without altering the Ti₂(PO₄)₃ framework. In the 0≤y≤2 range, the OCV curves of Li//Li_yMn_0.50Ti₂(PO₄)₃ cells show two main potential plateaus at 2.90 and 2.50–2.30 V. Comparison between the OCV curves of Li//Li_(1+y)Ti₂(PO₄)₃ and Li//Li_yMn_0.50Ti₂(PO₄)₃ shows that the intercalation occurs first in the unoccupied M1 site of Mn_0.50Ti₂(PO₄)₃ at 2.90 V and then, for compositions y>0.50, at the M2 site (2.50–2.30 V voltage range). The effect of calcium substitution in Mn_0.50Ti₂(PO₄)₃ on the lithium intercalation is also discussed from a structural and kinetic viewpoint. In all systems, the lithium intercalation is associated with a redistribution of the divalent cation over all M1 sites. In the case of Mn_0.50Ti₂(PO₄)₃, the stability of Mn²⁺ either in an octahedral or tetrahedral environment facilitates cationic migration.     

Phonon–replica transitions in InGaN/GaN quantum well structures

A side-bump feature in a photoluminescence (PL) spectrum of an InGaN compound was widely observed. With reasonable fitting to PL spectra with three Gaussian distributions, the temperature variations of the peak positions, integrated PL intensities, and peak widths of the main and first side peaks of three InGaN/GaN multiple quantum well samples with different nominal indium contents are shown and interpreted. The existence of the side peaks is attributed to phonon–replica transitions. The variations of the peak position separations and the decreasing trends of the first side peak widths beyond certain temperatures in those samples were explained with the requirement of phonon momentum condition for phonon–replica transitions. In the sample with 25% nominal indium content, the phonon–replica transition could become stronger than the direct transition of localized states.     

Darboux transformation and solitons of Yang-Mills-Higgs equations in R2,1

The Darboux transformations for soliton equations are applied to the Yang-Mills-Higgs equations.New solutions can be obtained from a known one via universal and purely algebraic formulas. SU(N) soliton solutions are constructed with explicit formulas. The interaction of solitons is described by the splitting theorem:each p-soliton is splitting into p single solitons asymptotically as t →±∞.