Synthesis and Evaluation of Imidazo[1,2‐a]pyridine Analogues of the ZSTK474 Class of Phosphatidylinositol 3‐Kinase Inhibitors

Using a scaffold‐hopping approach, imidazo[1,2‐a]pyridine analogues of the ZSTK474 (benzimidazole) class of phosphatidylinositol 3‐kinase (PI3K) inhibitors have been synthesized for biological evaluation. Compounds were prepared using a heteroaryl Heck reaction procedure, involving the palladium‐catalysed coupling of 2‐(difluoromethyl)imidazo[1,2‐a]pyridines with chloro, iodo or trifluoromethanesulfonyloxy (trifloxy) substituted 1,3,5‐triazines or pyrimidines, with the iodo intermediates being preferred in terms of higher yields and milder reaction conditions. The new compounds maintain the PI3K isoform selectivity of their benzimidazole analogues, but in general show less potency.     

Aryl Boronic Acid Catalysed Dehydrative Substitution of Benzylic Alcohols for C−O Bond Formation

A combination of pentafluorophenylboronic acid and oxalic acid catalyses the dehydrative substitution of benzylic alcohols with a second alcohol to form new C−O bonds. This method has been applied to the intermolecular substitution of benzylic alcohols to form symmetrical ethers, intramolecular cyclisations of diols to form aryl-substituted tetrahydrofuran and tetrahydropyran derivatives, and intermolecular crossed-etherification reactions between two different alcohols. Mechanistic control experiments have identified a potential catalytic intermediate formed between the aryl boronic acid and oxalic acid.     

Isolation and Crystallographic Characterization of Two,Nonisolated Pentagon Endohedral Fullerenes: Ho3N@C2(22010)-C78 and Tb3N@C2(22010)-C78

Purified samples of Ho₃N@C₂(22010)-C₇₈ and Tb₃N@C₂(22010)-C₇₈ have been isolated by two distinct processes from the rich array of fullerenes and endohedral fullerenes present in carbon soot from graphite rods doped with Ho₂O₃ or Tb₄O₇. Crystallographic analysis of the endohedral fullerenes as cocrystals with Ni(OEP) (in which OEP is the dianion of octaethylporphyrin) shows that both molecules contain the chiral C₂(22010)-C₇₈ cage. This cage does not obey the isolated pentagon rule (IPR) but has two sites where two pentagons share a common C−C bond. These pentalene units bind two of the metal ions, whereas the third metal resides near a hexagon of the cage. Inside the cages, the Ho₃N or Tb₃N unit is planar. Ho₃N@C₂(22010)-C₇₈ and Tb₃N@C₂(22010)-C₇₈ use the same cage previously found for Gd₃N@C₂(22010)-C₇₈ rather than the IPR-obeying cage found in Sc₃N@D_3h-C₇₈.     

Oxygen binding of water-soluble cobalt porphyrins in aqueous solution

Water-soluble cobalt porphyrin 1Co and imidazole ligand 2 were synthesized. 1Co binds dioxygen in the presence of imidazole ligand 2 in aqueous solution. The formation of the oxygen adduct 2-1Co(O(2)) was studied using UV-vis and EPR spectroscopy. The impact of pH on the kinetic stability of the oxygen adduct was examined.     

Probing the contribution of electronic coupling to the directionality of electron transfer in photosynthetic reaction centers

Subpicosecond transient absorption studies are reported for a set of Rhodobacter (R.) capsulatus bacterial photosynthetic reaction centers (RCs) designed to probe the origins of the unidirectionality of charge separation via one of two electron transport chains in the native pigment-protein complex. All of the RCs have been engineered to contain a heterodimeric primary electron donor (D) consisting of a bacteriochlorophyll (BChl) and a bacteriopheophytin (BPh). The BPh component of the M heterodimer (Mhd) or L heterodimer (Lhd) is introduced by substituting a Leu for His M200 or His L173, respectively. Previous work on primary charge separation in heterodimer mutants has not included the Lhd RC from R. capsulatus, which we report for the first time. The Lhd and Mhd RCs are used as controls against which we assess RCs that combine the heterodimer mutations with a second mutation (His substituted for Leu at M212) that results in replacement of the native L-side BPh acceptor with a BChl (beta). The transient absorption spectra reveal clear evidence for charge separation to the normally inactive M-side BPh acceptor (H(M)) in Lhd-beta RCs to form D+H(M)- with a yield of approximately 6%. This state also forms in Mhd-beta RCs but with about one-quarter the yield. In both RCs, deactivation to the ground state is the predominant pathway of D decay, as it is in the Mhd and Lhd single mutants. Analysis of the results indicates an upper limit ofV2L/V2m < or = 4 for the contribution of the electronic coupling elements to the relative rates of electron transfer to the L versus M sides of the wild-type RC. In comparison to the L/M rate ratio (kL/kM) approximately 30 for wild-type RCs, our findings indicate that electronic factors contribute approximately 35% at most to directionality with the other 65% deriving from energetic considerations, which includes differences in free energies, reorganization energies, and contributions of one- and two-step mechanisms on the two sides of the RC.     

Controlling electron delocalisation in constrained N,N′-dimethyl-4,4′-bipyridinium dications

The synthesis is described of two N,N′-dimethyl-4,4′-bipyridinium salts for which the two pyridinium rings are connected via varying length alkoxy chains attached at the 3,3′-locations.     

The effect of branching on the physical properties of 73/27 4‐hydroxybenzoic acid/2‐hydroxy‐6‐naphthoic acid

The 73/27 4‐hydroxybenzoic acid (HBA)/2‐hydroxy‐6‐naphthoic acid (HNA) copolyester was prepared by the inclusion of two crosslinkable oligomers. These systems were synthesized by melt polymerization and characterized using differential scanning calorimetry, thermogravimetric analysis, polarized optical microscope and wide‐angle X‐ray diffraction. The transition from thermoplastic to thermosetting character occurred when 10 wt% or above of oligomer was added to the 73/27 HBA/HNA random mixture. The melt rheology of the HBA/HNA copolyesters containing two oligomers was investigated. The copolyesters displayed an increase in complex viscosity and transition from liquid‐like to solid‐like behavior as the oligomer content increased, and finally there was no melting transition when the oligomer content reached 10 wt%. Shear storage modulus measured by a dielectric mechanical analysis decreased slightly with increasing oligomer content. An adhesive test using an aluminum sheet revealed an increase in the lap shear strength up to 5 wt% of oligomer content without a significant reduction in shear storage modulus. On the other hand, the 73/27 HBA/HNA containing 10 wt% oligomer displayed a dramatic decrease in lap shear strength. Copyright © 1999 John Wiley & Sons, Ltd.     

Self-Assembling Supramolecular Nanostructures from a C60 Derivative: Nanorods and Vesicles

Simple modification of solution conditions provides facile access to supramolecular fullerene nanostructures. The fullerene derivative shown self-assembles to give nanorods or vesicles. The nanorods have diameters of 10–250 nm, depending on the counterion, and lengths greater than 70 μm. If ultrasonication is used, no nanorods form, but vesicles result having diameters of 10–70 nm and wall thicknesses of 3–6 nm.     

Total synthesis of polycavernoside A, a lethal toxin of the red alga Polycavernosa tsudai

[structure: see text] Two approaches to the synthesis of the aglycon 120 of polycavernoside A (1) were developed, only one of which was completed. The successful "second-generation" route assembled the aglycon seco acids 102 and 106 via Nozaki-Hiyama-Kishi coupling of aldehyde 70, prepared from methyl (S)-3-hydroxy-2-methylpropionate (72) and (S)-pantolactone (73), with vinyl bromide 71. The latter was obtained from a sequence which commenced from the silyl ether 24 of 3-hydroxypropionaldehyde and entailed cyclization of (Z)-zeta-hydroxy-alpha,beta-unsaturated ester 82. Regioselective Yamaguchi lactonization of trihydroxycarboxylic acids 102 and 106 and subsequent functional-group adjustments led to macrolactone 120, to which the fucopyranosylxylopyranoside moiety was attached. Stille coupling of the glycosidated aglycon 128 with dienylstannane 129 furnished polycavernoside A in a synthesis for which the longest linear sequence was 25 steps. The overall yield to lactone 120 was 4.7%.     

Synthetic erythropoietic proteins: tuning biological performance by site-specific polymer attachment

Chemical synthesis in combination with precision polymer modification allows the systematic exploration of the effect of protein properties, such as charge and hydrodynamic radius, on potency using defined, homogeneous conjugates. A series of polymer-modified synthetic erythropoiesis proteins were constructed that had a polypeptide chain similar to the amino acid sequence of human erythropoietin but differed significantly in the number and type of attached polymers. The analogs differed in charge from +5 to -26 at neutral pH and varied in molecular weight from 30 to 54 kDa. All were active in an in vitro cell proliferation assay. However, in vivo potency was found to be strongly dependent on overall charge and size. The trends observed in this study may serve as starting points for the construction of more potent synthetic EPO analogs in the future.