Local structure and photoluminescent characteristics of Eu<Superscript>3+</Superscript> in ZnO–SiO<Subscript>2</Subscript> glasses

The photoluminescence properties of xZnO–(100−x)SiO₂ (x = 0, 5, 10, 20) containing 1% Eu₂O₃ prepared by a sol–gel method were systematically investigated. The results indicated that the relative proportion of f–f transitions to charge transfer (CT) absorption decreased with the increase of ZnO concentration. The intensity of ⁵D₀–⁷F_J transitions of Eu³⁺ ions was enhanced with the increase of ZnO content due to local structure changes and decreased quantities of Eu³⁺ ions clusters. The results of fluorescence line narrow (FLN) spectra indicated that Eu³⁺ ions occupied one site in SiO₂ glass and two sites in ZnO–SiO₂ glasses. The second-order crystal field parameters were calculated. B₂₀ and B₂₂ for site 1 increased with excitation energy, while ones hardly changed for site 2.     

Ruthenium Carbonyl Cluster Complexes with Phenylgermyl Ligands from the Reactions of Ph<Subscript>3</Subscript>GeH with Ru(CO)<Subscript>5</Subscript> and Ru<Subscript>3</Subscript>(CO)<Subscript>12</Subscript>

Four new triphenylgermylruthenium carbonyl compounds HRu(CO)₄GePh₃, 14; Ru(CO)₄(GePh₃)₂, 15; Ru₂(CO)₈(GePh₃)₂, 16; and Ru₃(CO)₉(GePh₃)₃(μ-H)₃, 17 were obtained from the reaction of Ru(CO)₅ with Ph₃GeH in hexane solvent at reflux, 68 °C. The major product 14 was formed by loss of CO from the Ru(CO)₅ and an oxidative addition of the GeH bond of the Ph₃GeH to the metal atom. This six coordinate complex contains one terminal hydrido ligand. Compound 15 is formed from 14 and contains two trans-positioned GePh₃ ligands in the six coordinate complex. Compound 16 contains two Ru(CO)₄(GePh₃) fragments joined by an Ru–Ru single bond. Compound 17 contains a triangular cluster of three ruthenium atoms with three bridging hydrido ligands and one terminal GePh₃ ligand on each metal atom. When heated to 125 °C, 14 was converted to the new triruthenium compound Ru₃(CO)₁₀(μ-GePh₂)₂, 18. Compound 18 consists of a triangular tri-ruthenium cluster with two GePh₂ ligands bridging two different edges of the cluster and one bridging CO ligand. Ru₃(CO)₁₂ was found to react with Ph₃GeH at 97 °C to yield three products: 15, and two new compounds Ru₃(CO)₉(μ-GePh₂)₃, 19 and Ru₂(CO)₆(μ-GePh₂)₂(GePh₃)₂, 20 were obtained. Compound 19 is similar to 18 having a triangular tri-ruthenium cluster but has three bridging GePh₂ ligands, one on each Ru–Ru bond. Compound 20 contains only two ruthenium atoms joined by a single Ru–Ru bond that has two bridging GePh₂ ligands and a terminal GePh₃ ligand on each metal atom. All compounds were characterized by a combination of IR, ¹H NMR, single-crystal X-ray diffraction analyses. This report is dedicated to Professor Dieter Fenske on the occasion of his 65th birthday for his many pioneering contributions to the chemistry of metal chalcogenide cluster complexes.     

Skipping in a hybrid polyketide synthase. Evidence for ACP-to-ACP chain transfer

A tetraketide synthase containing a loading module (LM), the extension modules erythromycin module 1, rapamycin module 2, and erythromycin module 2 (LM-Ery1-Rap2-Ery2-TE), when expressed in Saccharopolyspora erythraea strain JC2, produced as previously reported a mixture of tetraketide lactones (minor products) and triketide lactones (major products). Several alternative plausible mechanisms by which this "skipping" phenomenon might occur may be proposed. Site-directed mutagenesis of the ketosynthase (KS) and acylcarrier protein (ACP) domains in the interpolated module has shown that skipping within the hybrid PKS involves passage of the growing polyketide through the interpolated module, by direct ACP-to-ACP transfer of the polyketide chain.     

Lipid bilayer disruption by polycationic polymers: the roles of size and chemical functional group

Polycationic polymers are used extensively in biology to disrupt cell membranes and thus enhance the transport of materials into the cell. The highly polydisperse nature of many of these materials makes obtaining a mechanistic understanding of the disruption processes difficult. To design an effective mechanistic study, a monodisperse class of polycationic polymers, poly(amidoamine) (PAMAM) dendrimers, has been studied in the context of supported dimyristoylphosphatidylcholine (DMPC) lipid bilayers using atomic force microscopy (AFM). Aqueous solutions of amine-terminated generation 7 (G7) PAMAM dendrimers caused the formation of 15-40-nm-diameter holes in lipid bilayers. This effect was significantly reduced for smaller G5 dendrimers. For G3, no hole formation was observed. In addition to dendrimer size, surface chemistry had a strong influence on dendrimer-lipid bilayer interactions. In particular, acetamide-terminated G5 did not cause hole formation in bilayers. In all instances, the edges of bilayer defects proved to be points of highest dendrimer activity. A proposed mechanism for the removal of lipids by dendrimers involves the formation of dendrimer-filled lipid vesicles. By considering the thermodynamics, interaction free energy, and geometry of these self-assembled vesicles, a model that explains the influence of polymer particle size and surface chemistry on the interactions with lipid membranes was developed. These results are of general significance for understanding the physical and chemical properties of polycationic polymer interactions with membranes that lead to the transport of materials across cell membranes.     

Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication     

Participation of Bao2* in chemiluminescence from low-pressure Ba(g) + O2 flames

New spectioscopic and vibronic population data support the essential correctness of BaO₂^* as the nascent polyatomic emitter and as the precursor to BaO (A ¹Σ⁺ → X¹Σ⁺) and (A' ¹Π → X¹Σ⁺) visible chemiluminescence from metal-rich Ba(g) + O₂ (+ Ar) diffusion flames at 2–350 mTorr- Absolute visible photon yields are reported over this pressure regime.     

Dissociation constants of the ampholyte glycine in 50 mass % methanol-water from 5 to 55°C,with related thermodynamic quantities

The two thermodynamic dissociation constants of glycine at 11 temperatures from 5 to 55°C in 50 mass % methanol-water mixed solvent have been determined from precise emf measurements with hydrogen-silver bromide electrodes in cells without liquid junction. The first acidic dissociation constant (K ₁)for the process HG⁺H⁺+G^± is expressed as a function ofT(^oK) by the equation pK ₁ = 2043.5/T – 9.6504 + 0.019308T. At 25°C, pK ₁is 2.961 in the mixed solvent, as compared with 2.350 in water, with H°=1497 cal-mole^–1, G°=4038 cal-mole^–1, S°=–8.52 cal-°K^–1-mole^–1, and C _p ^o =–53 cal-°K^–1-mole^–1. The second acidic dissociation constant (K ₂)for the process G^±H⁺+G^– over the temperature range studied is given by the equation pK ₂ = 3627.1/T – 7.2371 + 0.015587T. At 25°C, pK ₂is 9.578 in MeOH–H₂O as compared with 9.780 in water, whereas H° is 10,257 cal-mole^–1, G° is 13,063 cal-mole^–1, S° is –9.41 cal-°K^–1-mole^–1, and C _p ^o is –43 cal-°K^–1-mole^–1. The protonated glycine becomes weaker in 50 mass % methanol-water, whereas the second dissociation process becomes stronger despite the lower dielectric constant of the mixed solvent (=56.3 at 25°C).     

Enhanced selectivity and sensitivity for inorganic anions using an ion-pairing reagent and sample stacking in capillary zone electrophoresis with direct UV detection

In this paper, the use of an ion-pairing reagent to improve the separation selectivity of inorganic anions in CZE was demonstrated by the addition of tetramethylammonium hydroxide (TMAOH) to the electrolyte. The separation of inorganic anions (Cl(-), I(-), Br(-), NO(2)(-), NO(3)(-) and SCN(-)) was performed using co-electroosmotic flow (EOF) with direct UV detection at 185 nm. The parameters affecting the mobility of the tested anions and the EOF such as the electrolyte pH and concentration of TMAOH in the electrolyte were examined to optimise the separation conditions. In addition, sample-stacking techniques were investigated to improve detection sensitivity. Detection sensitivities were improved 5-13-fold using electrokinetic sample stacking. The detection limits ranged from 1-3 micro mol L(-1). Finally, the proposed method was used for the separation of anions in groundwaters.     

EXCITED STATES OF DNA AND ITS COMPONENTS AT ROOM TEMPERATURE—III. SPECTRA, POLARISATION AND QUANTUM YIELDS OF EMISSIONS FROM ApA AND poly rA*

Abstract— Corrected normalised emission spectra from 300 to 480 nm and their polarisation are reported for neutral and poly rA at room temperature. Yields are 4 times (ApA) and 6 times (poly rA) greater than the monomer. Comparison of emission spectra and polarisation spectra demonstrates heterogeneity of emission and, following attempts at spectral synthesis, comparison with experimental reference spectra allows the observed total emission spectra to be resolved into four components assigned as I monomer-like emission, II excimer fluorescence, HI monomer phosphorescence, IV excimer phosphorescence; the polarisation of the excimer fluorescences of ApA and poly rA are deduced. The observations can be understood quantitatively using a simple stacking model with excimer emissions originating in the stacked components. Quantitative differences between ApA and poly rA are due to their different hypochromism and extent of stacking. Differences of polarisation are attributed to different stacking geometries, and the directional properties of the transition moment suggest that the excimer fluorescence is largely charge-resonance in nature.