An integrated microfluidic device for the high-throughput screening of microalgal cell culture conditions that induce high growth rate and lipid content

This study describes the development of a microfluidic device for the high-throughput screening of culture conditions, such as the optimum sodium acetate concentration for promoting rapid growth and high lipid accumulation of Chlamydomonas reinhardtii. An analysis of the microalgal growth on the microfluidic device revealed an optimum sodium acetate concentration of 5.72 g L^?1. The lipid content, determined by the 4,4-Difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene (BODIPY® 505/515) staining method, increased with the sodium acetate concentration. The results were found to be statistically reproducible with respect to cell growth and lipid production. Other nutrient conditions, including the nitrogen and phosphorus concentrations, can also be optimized on the same microfluidic platform. The microfluidic device performance results agreed well with the results obtained from the flask-scale experiments, validating that the culture conditions were scalable. Finally, we, for the first time, established a method for the absolute quantification of the microalgal lipid content in the picoliter culture volumes by comparing the on-chip and off-chip data. In conclusion, we successfully demonstrated the high-throughput screening of sodium acetate concentrations that induced high growth rates and high lipid contents in C. reinhardtii cells on the microfluidic device.

Simultaneous,real-time measurement of nitric oxide and oxygen dynamics during cardiac ischemia-reperfusion of the rat utilizing sol-gel-derived electrochemical microsensors

In this study, we simultaneously measured nitric oxide (NO) and oxygen (O₂) dynamics in the myocardium during myocardial ischemia-reperfusion (IR) utilizing sol-gel modified electrochemical NO and O₂ microsensors. In addition, we attempted to clarify the correlation between NO release in the ischemic period and O₂ restoration in the myocardium after reperfusion, comparing a control heart with a remote ischemic preconditioning (RIPC)-treated heart as an attractive strategy for myocardial protection. Rat hearts were randomly divided into two groups: a control group (n = 5) and an RIPC group (n = 5, with RIPC treatment). Myocardia that underwent RIPC treatment (182 ± 70 nM, p < 0.05) released more NO during the ischemic period than those of the control group (63 ± 41 nM). The restoration value of oxygen tension (pO₂) in the RIPC group significantly increased and was restored to pre-ischemic levels (92.6 ± 36.8%); however, the pO₂ of the control group did not increase throughout the reperfusion period (5.7 ± 7.5%, p = 0.001). Myocardial infarct size measurements revealed a significant decrease in cell death in the myocardium region of the RIPC group (41.44 ± 6.42%, p = 0.001) compared with the control group (60.05 ± 10.91%). As a result, we showed that the cardioprotective effect of RIPC could be attributed to endogenous NO production during the ischemic period, which subsequently promoted reoxygenation in post-ischemic myocardia during early reperfusion. Our results suggest that the promotion of endogenous formation during an ischemic episode might be helpful as a therapeutic strategy for protecting the myocardium from IR injury. Additionally, our NO and O₂ perm-selective microsensors could be utilized to evaluate the effect of drug or treatment.     

Synthesis of 3-Alkylidenecepham-4-carboxylic Acid derivatives by Samarium(II) Iodide Reduction

Samarium(II) iodide promoted reductive deacetoxylation of 7-aminocephalosporanic acid derivatives to synthesize 3-alkylidenecepham-4-carboxylates, which could be valuable intermediates for the synthesis of new cephalosporin antibiotics, was investigated.     

Novel alignment method for control of high pretilt angle by using a solvent dipping effect on polymer surfaces

A novel alignment method for control of high pretilt angle in nematic liquid crystals (NLC), using a solvent dipping effect on various alignment layers, was successfully investigated. The pretilt angle of a NLC is increased by dipping before rubbing treatment on three kinds of rubbed polyimide (PI) surfaces. The pretilt generated by the dipping after rubbing a PI surface with a short side chain is high compared with a PI surface with a long side chain. The pretilt generated by dipping before rubbing homeotropic layer of a positive type NLC (δε > 0) is lower than that of the negative type NLC (δε < 0). The generated NLC pretilt angle is attributed to the perpendicular component of the permittivity epsilon of the NLC.     

Electro-optical characteristics for the photoaligned vertical alignment cell using photopolymer surfaces containing chalconyl and cholesterly groups

A new photoalignment material, copoly(4-methacryloyloxychalcone-cholesteryl methacrylate) (copoly(M4Ch-ChMA)), was synthesized and the electro-optical characteristics for the photoaligned vertically aligned (VA) liquid crystal display (LCD) were studied. Excellent voltagetransmittance characteristics were achieved for the photoaligned VA-LCD with 1 min polarized UV exposure at an oblique direction of 30° on the copoly(M4Ch-ChMA) surfaces. The response time of the VA-LCD was about 39 ms, and increased with increasing UV exposure time. We suggest that the proportion of photodimerized chalcone group increased with increasing UV exposure time, contributing to a higher response time.     

Biological Removal of Phosphate at Low Concentrations Using Recombinant Escherichia coli Expressing Phosphate-Binding Protein in Periplasmic Space

During wastewater treatment, phosphate removal is an important and challenging process; thus, diverse technologies, including those derived from biological means, have been devised for efficient phosphate removal. Although conventional biological methods are effective in decreasing wastewater phosphate levels to ~1 mg/L, long periods of microbial adaptation are required for effective phosphate removal, and the removal efficiency of these methods is relatively poor at lower phosphate concentrations. In the present work, we constructed a recombinant Escherichia coli with periplasmic-expressed phosphate-binding protein (PBP) and investigated its biological removal ability for low phosphate levels. We found that the PBP-expressing recombinant E. coli cells showed efficient (> 94 %) removal of phosphate at low concentrations (0.2–1.0 mg/L) in a treated cell mass-dependent manner. Collectively, we propose that our PBP-expressing recombinant whole-cell system could be successfully used during wastewater treatment for the biological removal of low concentrations of phosphate.     

Divergent Synthesis of All Possible Optically Active Regioisomers of Myo‐Inositol Mono‐ and Bisphosphates

All possible optically active regioisomers of myo‐inositol mono‐ and bisphosphates were synthesized using inositol derivatives suitably protected with various protecting groups (IR_ns) as key intermediates. A series of procedures including Novozym 435 catalyzed enzymatic resolution of (3aR,4S,7S,7aR)‐rel‐3a,4,7,7a‐tetrahydro‐2,2‐dimethyl‐1,3‐benzodioxole‐4,7‐diol diacetate, several protection and deprotection reactions, and acyl migration afforded two enantiomeric pairs of IR₅ and six enantiomeric pairs of IR₄. Phosphorylation of these key intermediates by the phosphitylation and oxidation procedure gave the target products after removal of the protecting groups.      

Adsorption and desorption of toluene on nanoporous TiO2/SiO2 prepared by atomic layer deposition (ALD): influence of TiO2 thin film thickness and humidity

Adsorption and desorption of toluene on bare and TiO₂-coated silica with a mean pore size of 15 nm under dry and humid conditions were studied using toluene breakthrough curves and temperature programmed desorption (TPD) of toluene and CO₂. Two TiO₂/silica samples (either partially or fully covered with TiO₂) were prepared with 50 and 200 cycles of TiO₂ atomic layer deposition (ALD), respectively. The capacity of silica to adsorb toluene improved significantly with TiO₂-thin film coating under dry conditions. However, toluene desorption from the surface due to displacement by water was more pronounced for TiO₂-coated samples than bare samples under humid conditions. In TPD experiments, silica with a thinner TiO₂ film (50-ALD cycled) had the highest reactivity for toluene oxidation to CO₂ both in the absence and presence of water. Toluene adsorption and oxidation reactivity of silica can be controlled by modifying the silica surface with small amount of TiO₂ using ALD.