An investigation of heparinase immobilization

A systematic investigation of the parameters that affect the efficiency of immobilizing heparinase onto cyanogen bromide activated crosslinked 8% agarose beads was conducted. Two experimental measures, the “fraction bound” and the “fraction retained,” were used to monitor the coupling efficiency. The fraction bound is the portion of the total initial enzyme that is bound to the agarose gel. The fraction retained is the fraction of bound enzyme that is active. The product of the two measures indicates the coupling efficiency. The activity of the immobilized heparinase was measured under conditions free of both internal and external mass transfer limitations, and thus, the fraction retained represents the true immobilized enzyme activity. Increasing the degree of activation of the beads results in an increase in the fraction bound, the fraction retained, and consequently, the coupling efficiency. As the ratio of enzyme solution to gel volume increases from 1.5 to 2.2, the fraction bound remains constant but the fraction retained decreases (heparinase concentration; 0.15 mg/mL and degree of activation; 9.5 μmol of cyanate esters/g of gel). At volume ratios greater than 2.2, both the fraction bound and the fraction retained decline continuously. Changing the heparinase concentration in the coupling solution changes the coupling efficiency in a manner similar to that of the volume ratio change. When heparin is added during the coupling process, the fraction bound declines as the heparin concentration increases, whereas the fraction retained increases up to a heparin concentration of 12 mg/mL and decreases thereafter. When arginine, lysine, and glycine are used to block the unreacted cyanate ester groups after the coupling process, the immobilized heparinase shows different pH optima of 6.5, 6.9, and 7.2, respectively. Based upon these findings, a protocol to optimize heparinase immobilization is developed.     

5-Ethoxy-3-(trichloromethyl)-1,2,4-oxadiazole

5-Ethoxy-3-(trichloromethyl)-1, 2, 4-oxadiazole (V) was synthesized to elucidate the chemistry involved in the preparation of the hitherto unreported alkoxy-1, 2, 4-oxadiazoles and to determine the effect of the isosteric replacement of sulfur by oxygen on antifungal activity. Heating the “amino-oxime” tautomer II of trichloroacetamidoxime with ethyl chloroformate furnished exclusively the O-acylated product III. The trans configuration of III accounts for its resistance to cyclize under a variety of conditions, in contrast to the general behaviour of acylated amidoximes. Pyrolysis of III at 160° yielded IV which exists in the keto form. Refluxing IV with ethyl iodide in the presence of silver oxide gave an isomeric mixture which was separated by v.p.c. to give V and VI. Compound V retained 60% of the overall activity of the corresponding sulfur analog.     

Crystal structure and pyroelectric coefficient of Co(IO3)2 and structural relationships among the anhydrous noncentrosymmetric 3d-transition metal lodates

Cobalt iodate, Co(IO₃)₂, is pyroelectric at room temperature and crystallizes in the trigonal space group P3 with four formulas in the unit cell. The pyroelectric coefficient p₃ = 5.1(5) × 10^?5 Cm^?2 K^?1, and the lattice constants at 298 K are a = 10.9597(1) and c = 5.0774(1)Å. The crystal structure was solved from the Patterson function and a consideration of the structural similarities among the anhydrous 3d-transition metal iodates. Refinement was by the method of least squares using 1825 observed reflections measured with a four-circle diffractometer. The final agreement factor R = 0.050. Two of the three independent octahedrally coordinated cobalt atoms are disordered. The absolute orientation of the polar axis was determined with respect to the crystal morphology. The iodine atoms in the trigonal pyramidal iodate ions point toward the morphologically undeveloped end of the crystals, as does the positive sense of the spontaneous polarization: It is this end that develops a positive polarization on heating. The spontaneous polarization is estimated at about 22 × 10^?2 Cm^?2. The iodate ion arrangement is very similar to that in α-LiIO₃. The anhydrous noncentrosymmetric 3d-iodates may be classified into three isomorphous sets, with space group P6₃ and corresponding maximal subgroups P3 and P2₁. All three sets are isostructural with α-LiIO₃ except for the cation distribution. The ability of the iodate ion framework to accept a range of cations of different valences is discussed in terms of the tricapped trigonal-prismatic environment about the iodine atoms.     

Influence of anchored cerium ions on the dispersity and activity of Pd/SiO2 catalysts

(Pd+Ce)/SiO₂ catalysts prepared by decomposition of organometallic complexes of Ce and Pd have higher activity, dispersity and selectivity in methanol synthesis than Pd/SiO₂ catalysts.

---

, (Pd+Ce)/SiO₂ , Ce Pd, Pd/SiO₂.

     

Comparison of total folate concentrations in foods determined by microbiological assay at several experienced U.S. commercial laboratories

Analysis of total folate concentration measured by microbiological assay in a variety of foods submitted in a routine manner to experienced laboratories that regularly perform folate analysis on fee-for-service basis was evaluated. Homogenates of fresh strawberries, frozen spinach, orange juice, frozen meat and vegetable pizza, dry macaroni, and dried pinto beans were prepared and stored under conditions previously determined to maintain stability of folate content. An aliquot of each composite and of 3 certified reference materials were sent on each of 4 occasions to 4 laboratories. Results for macaroni and pizza, the only folic acid-fortified foods, had considerably lower between-laboratory variation (CV(B)) with CV(B) of 9-11% versus >45% for other foods. Mean total folate ranged from 14 to 279 microg/100 g for a mixed vegetable reference material, from 5 to 70 microg/100 g for strawberries, and from 28 to 81 microg/100 g for wholemeal flour. Only 1 laboratory reported using a tri-enzyme extraction, and all laboratories used folic acid fortified foods as internal control materials. Users of commercial total folate analysis should understand the uncertainty in values determined by microbiological assay, particularly for foods containing primarily naturally occurring folate, which may not be apparent when replicate samples are not submitted for analysis.     

Synthesis and characterization of molybdenum oxo complexes of two tripodal ligands: reactivity studies of a functional model for molybdenum oxotransferases

Reaction of the tetradentate ligand N-(2-hydroxybenzyl)-N,N-bis(2-pyridylmethyl)amine (L-OH) with MoO2Cl2 in methanol in the presence of NaOMe and PF6- results in the formation of [MoO2(L-O)]PF6. Similarly, the reaction of N-(2-mercaptobenzyl)-N,N-bis(2-pyridylmethyl)amine (L-SH) with MoO2(acac)2 leads to the formation of [MoO2(L-S)]+. The dioxo-molybdenum complex [MoO2(L-O)]+ reacts with phosphines in methanol to afford phosphine oxides and an air-sensitive molybdenum complex, tentatively identified as [Mo(IV)O(L-O)(OCH3)]. The latter complex is capable of reducing biological oxygen donors such as DMSO or nitrate, thereby mimicking the activity of DMSO reductase and nitrate reductase. Reaction of [MoO2(L-O)]PF6 with PPh3 in other solvents than methanol leads to the formation of the Mo(V) dimer [(L-O)OMo(micro-O)MoO(L-O)](PF6)2. The crystal structures of [MoO2(L-O)]PF6 and the micro-oxo bridged dimer are presented.     

Crossed molecular beam chemiluminescence study of the metastable mercury reaction: Hg(3P)+Br2 → HgBr(B) + Br

Chemiluminescence from HgBr(B) formed in the reaction of Hg(6³P_o with Br₂ has been observed using a N₂-seeded nozzle beam of metastable Hg³P_o) atoms. The cross section has been estimated to be 3⁺³_?2 at a collission energy of 0.33 eV. This value is smaller by more than an order of magnitude than the corresponding value for Hg(³P₂) atoms measured by Krause et al., in accordance with their inference based on less direct evidence.     

SEDIMENTATION ANALYSIS OF DNA PHOTOOXIDIZED IN THE PRESENCE OF THIOPYRONINE

Abstract. Illumination of single-stranded φ×174 phage DNA with visible lightλ > 500 nm) in the presence of the sensitizer thiopyronine results in both chain scissions detectable by velocity sedimentation in neutral medium and in alkali-labile bonds which yield secondary strand breaks after alkaline treatment. Compared with the generation of primary strand breaks, the formation of alkali-labile sites seems to be the predominant reaction.
Photodynamic treatment of homogeneous double-stranded Ta, phage DNA leads to changes in the overall conformation of DNA as revealed by an initial increase of the sedimentation coefficient. The simultaneous occurrence of different effects (decrease of molecular weight, increase of effective DNA flexibility) is particularly evident from changes in the sedimentation coefficient distribution. The fact that both processes influence the sedimentation behaviour questions the common procedure of calculating double-strand break numbers from sedimentation coefficient distributions on the basis of s#-M relations which are valid for intact DNA only.
Photooxidized double-stranded DNA exhibits an increased sensitivity against shear forces.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.