Ways of formulating wind speed in heat convection significantly influencing pavement temperature prediction

This paper investigates the influences of wind speed and of heat-convection coefficient on the temperature prediction of a slab. Numerical calculation of a slab temperature found that wind speed varies the slab temperature in a degree of 2–10 °C. More varying degrees occur at midday and in sunny day but less, at midnight and in a cloud day. These degrees also depend on the used heat-convection coefficients, which have different values in different models. Special emphases are paid to unearth the correlation between different heat convection coefficients and find the best alternative in the slab-temperature prediction.     

Vortex Counter-Current Chromatography: Performance of a New Preparative Column

A new preparative column for the vortex counter-current chromatograph was fabricated by making many (966) cylindrical separation units to a high-density polyethylene disk and then threading them with 6–40 taps. The resulting column had a total capacity of 364 mL. The performance of this vortex column was examined with three different two-phase solvent systems each using a set of suitable test samples: hexane–ethyl acetate–methanol–0.1 M hydrochloric acid (1:1:1:1, v/v) for the separation of DNP-amino acids; 1-butanol–acetic acid–water (4:1:5, v/v) for the separation of dipeptides; and hexane–acetonitrile–water (20:15:2, v/v) for the separation of Sudan dyes. Most of the separations show high partition efficiency of over a thousand theoretical plates, as expected based on the results previously obtained in preliminary separations with a small column. Overall, the results of the present study suggest that further improvement of the partition efficiency can be obtained by the modifying column configuration.

     

Heating and cooling effects generated by the dynamic stresses of cracked interfaces and layers in laminated composites

The temperature field generated by the sudden application of a far-field mechanical loading of a periodically layered composite with an interfacial crack or with a cracked layer parallel to the interfaces is determined. As a result of the crack’s existence, the periodicities of the structure and the thermoelastic field are lost. The complexity of the resulting problem is resolved by the combined application of the representative cell method and the full (two-way) dynamic thermomechanical equations. In the former analysis, due to the loss of periodicity the dynamic thermoelastic Green’s functions are generated, in conjunction with the double finite discrete Fourier transform. In the latter one, the transformed displacements and temperature are expressed by second-order expansions and the strong-form of the elastodynamic and energy equations together with the various interfacial and the so called Born–von Karman boundary conditions are imposed in the average sense (in the transform domain). The results exhibit the induced temperature field at any point in the plane of the crack. The generated temperature fields show the cooling and heating zones in both Mode I and Mode II deformations. In addition, the adiabatic assumption (according to which the heat conduction is a priori ignored) is assessed by comparing the computed temperature field with the corresponding one based on the full thermomechanical coupling.     

Synthesis of (Z)-N-alkenyl-β-arylselanyl imidazoles via additive-free nucleophilic addition of imidazole to arylselanylalkynes

We present herein our results on the nucleophilic addition of imidazole to a range of arylselanylalkynes by simple heating in DMF without any additives to give (Z)-1-(1-organyl-(2-arylselanyl)vinyl)-1H-imidazoles. The reactions were performed under mild conditions with a range of arylselanylalkynes in good yields and with high regio- and stereoselectivity to give the respective (Z)-arylselanyl alkene as the only isomer.     

pH‐controlled reaction divergence of decarboxylation versus fragmentation in reactions of dihydroxyfumarate with glyoxylate and formaldehyde: parallels to biological pathways

The reactions of dihydroxyfumarate with glyoxylate and formaldehyde exhibit a unique pH‐controlled mechanistic divergence leading to different product suites by two distinct pathways. The divergent reactions proceed via a central intermediate (2,3‐dihydroxy‐oxalosuccinate, 3 , in the reaction with glyoxylate and 2‐hydroxy‐2‐hydroxymethyl‐3‐oxosuccinate, 14 , in the reaction with formaldehyde). At pH 7–8, products ( 7 , 8 , and 15 ) exclusively from a decarboxylation of the intermediate are observed, while at pH 13–14, products ( 9 , 10 , and 16 ) solely derived from a hydroxide‐promoted fragmentation of the intermediate are formed. The decarboxylative and fragmentation pathways are mutually exclusive and do not appear to coexist under the range of pH (7–14) conditions investigated. Herein, we employ a combination of quantitative ¹³C NMR measurements and density functional theory calculations to provide a rationale for this pH‐driven reaction divergence. These rationalizations also hold true for the reactions of dihydroxyfumarate produced in situ by the catalytic cyanide‐mediated dimerization of glyoxylate. In addition, the non‐enzymatic decarboxylation and fragmentation transformations of these central intermediates ( 3 and 14 ) appear to have intriguing parallels to the enzymatic reactions of oxalosuccinate and formation of glyceric acid derivatives in extant metabolism – the high and low pH mimicking the precise control exerted by the enzymes over reaction pathways. Copyright © 2016 John Wiley & Sons, Ltd.     

3D MRI of non-Gaussian (3)He gas diffusion in the rat lung

In (3)He magnetic resonance images of pulmonary air spaces, the confining architecture of the parenchymal tissue results in a non-Gaussian distribution of signal phase that non-exponentially attenuates image intensity as diffusion weighting is increased. Here, two approaches previously used for the analysis of non-Gaussian effects in the lung are compared and related using diffusion-weighted (3)He MR images of mechanically ventilated rats. One approach is model-based and was presented by Yablonskiy et al., while the other approach utilizes the second order decay contribution that is predicted from the cumulant expansion theorem. Total lung coverage is achieved using a hybrid 3D pulse sequence that combines conventional phase encoding with sparse radial sampling for efficient gas usage. This enables the acquisition of nine 3D images using a total of only approximately 1 L of hyperpolarized (3)He gas. Diffusion weighting ranges from 0 s/cm(2) to 40 s/cm(2). Results show that the non-Gaussian effects of (3)He gas diffusion in healthy rat lungs are directly attributed to the anisotropic geometry of lung microstructure as predicted by the Yablonskiy model, and that quantitative analysis over the entire lung can be reliably repeated in time-course studies of the same animal.     

Crystallization of the $${\text{Mn}}^{{\text{II}}}[12{\text{-MC}}_{{\text{Mn}}^{{\text{III}}}{\text{(N)shi}}}{\text{-}}4]^{2+}$$ Mn II [ 12 -MC Mn III (N)shi - 4 ] 2 + Structure with 1,2,4-Triazolate from Methanol

Journal of Chemical Crystallography - The metallacrown (MC) dimer complex {MnII(OAc)(1,2,4-trz) $$[12{\text{-MC}}_{{\text{Mn}}^{{\text{III}}}{\text{(N)shi}}}{\text{-}}4]$$...     

Recognition of Dimethylarginine Analogues by Tandem Tudor Domain Protein Spindlin1

Epigenetic readout of the combinatorial posttranslational modification comprised of trimethyllysine and asymmetric dimethylarginine (H3K4me3R8me2a) takes place via biomolecular recognition of tandem Tudor-domain-containing protein Spindlin1. Through comparative thermodynamic data and molecular dynamics simulations, we sought to explore the binding scope of asymmetric dimethylarginine mimics by Spindlin1. Herein, we provide evidence that the biomolecular recognition of H3K4me2R8me2a is not significantly affected when R8me2a is replaced by dimethylarginine analogues, implying that the binding of K4me3 provides the major binding contribution. High-energy water molecules inside both aromatic cages of the ligand binding sites contribute to the reader–histone association upon displacement by histone peptide, with the K4me3 hydration site being lower in free energy due to a flip of Trp151.     

Optimization of Biocompatibility for a Hydrophilic Biological Molecule Encapsulation System

Despite considerable advances in recent years, challenges in delivery and storage of biological drugs persist and may delay or prohibit their clinical application. Though nanoparticle-based approaches for small molecule drug encapsulation are mature, encapsulation of proteins remains problematic due to destabilization of the protein. Reverse micelles composed of decylmonoacyl glycerol (10MAG) and lauryldimethylamino-N-oxide (LDAO) in low-viscosity alkanes have been shown to preserve the structure and stability of a wide range of biological macromolecules. Here, we present a first step on developing this system as a future platform for storage and delivery of biological drugs by replacing the non-biocompatible alkane solvent with solvents currently used in small molecule delivery systems. Using a novel screening approach, we performed a comprehensive evaluation of the 10MAG/LDAO system using two preparation methods across seven biocompatible solvents with analysis of toxicity and encapsulation efficiency for each solvent. By using an inexpensive hydrophilic small molecule to test a wide range of conditions, we identify optimal solvent properties for further development. We validate the predictions from this screen with preliminary protein encapsulation tests. The insight provided lays the foundation for further development of this system toward long-term room-temperature storage of biologics or toward water-in-oil-in-water biologic delivery systems.     

Ultrasonic characterization of shrinkage microporosity in aluminum castings

Shrinkage microporosity in cast aluminum was characterized utilizing the frequency dependence of ultrasonic attenuation caused by scattering from the pores. Measurements were made with the plate specimen immersed in water, and, by using a focused transducer, spatial resolution of about 2 mm was obtained. An accurate measure of attenuation was obtained by comparing the specimen’s ultrasonic signal with that from a pore-free reference specimen. Although the attenuation could be fitted using a single spherical pore size, better fits were obtained by assuming a lognormal distribution of spheres. Pore volume fraction inferred from the lognormal fits overestimates the actual volume fraction, determined from density measurements, by the same factor for all volume fractions. The actual volume fraction is overestimated by more than 100%, due to the complicated, nonspherical pore shapes, and must be taken into account to obtain accurate values of porosity. The strong correlation (r²=0.97) between ultrasonic and density-derived volume fractions permits reliable, nondestructive laboratory measurements of porosity.