Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.

     

Fluorophore‐Promoted RNA Folding and Photostability Enables Imaging of Single Broccoli‐Tagged mRNAs in Live Mammalian Cells

Spinach and Broccoli are fluorogenic RNA aptamers that bind DFHBI, a mimic of the chromophore in green fluorescent protein, and activate its fluorescence. Spinach/Broccoli‐DFHBI complexes exhibit high fluorescence in vitro, but they exhibit lower fluorescence in mammalian cells. Here, computational screening was used to identify BI, a DFHBI derivative that binds Broccoli with higher affinity and leads to markedly higher fluorescence in cells compared to previous ligands. BI prevents thermal unfolding of Broccoli at 37 °C, leading to more folded Broccoli and thus more fluorescent Broccoli‐BI complexes in cells. Broccoli‐BI complexes are more photostable owing to impaired photoisomerization and rapid unbinding of photoisomerized cis‐BI. These properties enable single mRNA containing 24 Broccoli aptamers to be imaged in live mammalian cells treated with BI. Small molecule ligands can thus promote RNA folding in cells, and thus allow single mRNA imaging with fluorogenic aptamers.     

Beiträge zur Chemie der Alkylverbindungen von Übergangsmetallen. 47. Zur Reaktion von Hexachloroceraten(IV) mit Lithiumorganylen

Contributions to the Chemistry of Organo-Transition Metal Compounds. 47. Reactions of Hexachlorocerates(IV) with Organolithium Compounds Pyridinium hexachlorocerate(IV) reacts with lithium organyls RLi RLi (R = 1-Nor, (CH₃)₂NCH₂CH₂CH₂, n-C₄H₉) in the molar ratio 1:2 with formation of Li₂[CeCl₆] · 2 NC₅H₅. A further mol RLi effects a reduction to Li₃[CeCl₆] · 2 NC₅H₅. With an excess of RLi amidocerium(III) complexes of the typ Li₄ are formed. Li₂[CeCl₆] is formed also at reactions of quartery ammonium salts, e. g. [C₆H₅CH₂N(C₂H₅)₃]₂[CeCl₆], with RLi (R = 1-Nor, Me₂₂NCH₂CH₂CH₂) followed by an reduction to Li₃[CeCl₆]. An excess of the lithium organyl effects the formation Li₄[RCeCl₆] complexes. The yielded compounds were characterized by elementary analysis, the hydrolysis and deuterolysis products, magnetic moments, and IR-spectra.     

Experimental studies on the applicability of the Kelvin equation to highly curved concave menisci

The thermodynamic properties of liquids trapped in microscopic pores are described in theory by the Kelvin equation, which relates the equilibrium meniscus curvature to the relative vapor pressure. We report here two series of experiments designed to test the validity of the Kelvin equation by direct measurement of the mean radius of curvature of the surface of cyclohexane condensed between crossed mica cylinders. In one series of experiments, the relative vapor pressure of the volatile cyclohexane was controlled by mixing it with a relatively involatile solute (n-dodecane or n-hexadecane). We found that the mean radius of curvature rapidly reached that predicted by the Kelvin equation at each relative vapor pressure of the volatile liquid, but that there was also a slow, but continuous, accumulation of the “involatile” solute at the point of condensation as the system approached true equilibrium. Such accumulation of very low vapor pressure materials may be one factor responsible for the discordant results reported by earlier workers. We find that the process of impurity buildup is complex, and suggest that studies of real porous systems may be affected by accumulation of “involatile” impurities through the vapor phase and by surface diffusion. The other series of experiments was designed to eliminate the impurity problem by maintaining the vapor pressure by temperature control of the pure liquid. The results from this series of experiments were not time dependent, and no evidence of contamination was found. The measured radii were within ±6% of those predicted by the Kelvin equation, for radii in the range 4–20 nm. We conclude that the thermodynamic basis of the Kelvin equation is valid in principle for menisci with radii as low as 4 nm.     

The dapE-encoded N-succinyl-l,l-diaminopimelic acid desuccinylase from Haemophilus influenzae is a dinuclear metallohydrolase

The Zn K-edge extended X-ray absorption fine structure (EXAFS) spectra, of the dapE-encoded N-succinyl-l,l-diaminopimelic acid desuccinylase (DapE) from Haemophilus influenzae have been recorded in the presence of one or two equivalents of Zn(II) (i.e. [Zn_(DapE)] and [ZnZn(DapE)]). The Fourier transforms of the Zn EXAFS are dominated by a peak at ca. 2.0 A, which can be fit for both [Zn_(DapE)] and [ZnZn(DapE)], assuming ca. 5 (N,O) scatterers at 1.96 and 1.98 A, respectively. A second-shell feature at ca. 3.34 A appears in the [ZnZn(DapE)] EXAFS spectrum but is significantly diminished in [Zn_(DapE)]. These data show that DapE contains a dinuclear Zn(II) active site. Since no X-ray crystallographic data are available for any DapE enzyme, these data provide the first glimpse at the active site of DapE enzymes. In addition, the EXAFS data for DapE incubated with two competitive inhibitors, 2-carboxyethylphosphonic acid and 5-mercaptopentanoic acid, are also presented.     

Mechanism of hierarchical porosity development in MFI zeolites by desilication: the role of aluminium as a pore-directing agent

The role of the concentration and the nature of aluminium in the creation of hierarchical porosity in both commercial and synthesized MFI zeolites have been investigated through controlled mesoporosity development by desilication in alkaline medium. Framework aluminium controls the process of framework silicon extraction and makes desilication selective towards intracrystalline mesopore formation. An optimal molar Si/Al ratio in the range 25-50 has been identified; this leads to an optimal mesoporosity centred around 10 nm and mesopore surface areas of up to 235 m(2) g(-1) while preserving the intrinsic crystalline and acidic properties. At lower framework Si/Al ratios the relatively high Al content inhibits Si extraction and hardly any mesopores are created, while in highly siliceous ZSM-5 unselective extraction of framework Si induces formation of large pores. The existence of framework Al sites in different T positions that are more or less susceptible to the alkaline treatment, and the occurrence of re-alumination, are tentative explanations for the remarkable behaviour of Al in the desilication process. The presence of substantial extra framework Al, obtained by steam treatment, inhibits Si extraction and related mesopore formation; this is attributed to re-alumination of the extraframework Al species during the alkaline treatment. Removal of extraframework Al species by mild oxalic acid treatment restores susceptibility to desilication, which is accompanied by formation of larger mesopores due to the enhanced Si/Al ratio in the acid-treated zeolite.     

A robust force field based method for calculating conformational energies of charged drug-like molecules

The binding affinity of a drug-like molecule depends among other things on the availability of the bioactive conformation. If the bioactive conformation has a significantly higher energy than the global minimum energy conformation, then the molecule is unlikely to bind to its target. Determination of the global minimum energy conformation and calculation of conformational penalties of binding is a prerequisite for prediction of reliable binding affinities. Here, we present a simple and computationally efficient procedure to estimate the global energy minimum for a wide variety of structurally diverse molecules, including polar and charged compounds. Identifying global energy minimum conformations of such compounds with force field methods is problematic due to the exaggeration of intramolecular electrostatic interactions. We demonstrate that the global energy minimum conformations of zwitterionic compounds generated by conformational analysis with modified electrostatics are good approximations of the conformational distributions predicted by experimental data and with molecular dynamics performed in explicit solvent. Finally the method is used to calculate conformational penalties for zwitterionic GluA2 agonists and to filter false positives from a docking study.     

Development and characterization of a small electromembrane extraction probe coupled with mass spectrometry for real-time and online monitoring of in vitro drug metabolism

A small and very simple electromembrane extraction probe (EME-probe) was developed and coupled directly to electrospray ionization mass spectrometry (ESI-MS), and this system was used to monitor in real time in vitro metabolism by rat liver microsomes of drug substances from a small reaction (incubation) chamber (37 °C). The drug-related substances were continuously extracted from the 1.0 mL metabolic reaction mixture and into the EME-probe by an electrical potential of 2.5 V. The extraction probe consisted of a 1-mm long and 350-μm ID thin supported liquid membrane (SLM) of 2-nitrophenyl octyl ether. The drugs and formed metabolites where extracted through the SLM and directly into a 3 μL min^?1 flow of 60 mM HCOOH inside the probe serving as the acceptor solution. The acceptor solution was directed into the ESI-MS-system, and the MS continuously monitored the drug-related substances extracted by the EME-probe. The extraction efficiency of the EME-probe was dependant on the applied electrical potential and the length of the SLM, and these parameters as well as the volume of the reaction chamber were set to the values mentioned above to avoid serious depletion from the reaction chamber (soft extraction). Soft extraction was mandatory in order not to affect the reaction kinetics by sample composition changes induced by the EME-probe. The EME-probe/MS-system was used to establish kinetic profiles for the in vitro metabolism of promethazine, amitriptyline and imipramine as model substances.     

Technical electrodes catalyzed with PtRu on mesoporous ordered carbons for liquid direct methanol fuel cells

This paper presents the behavior of ordered mesoporous carbon (OMC)-supported catalysts as anodes for direct methanol fuel cells (DMFC), fed with an aqueous methanol solution. OMC samples were prepared by the nanocasting method from a polymerized furan resin using mesoporous silica as a template. Pt and PtRu nanoparticles were supported on OMC with high dispersion, the particle size being 2.4 nm at PtRu loading of 15 wt.%. The resulting catalysts were analyzed using carbon monoxide stripping voltammetry, cyclic voltammetry, and chronoamperometry in three-electrode experiments and recording cell voltage vs. current density curves in practical DMFC. It was found that PtRu-catalyzed technical electrodes exhibited good activity towards methanol electrooxidation in half-cell experiments under fuel-cell-relevant conditions. Specifically, Pt₈₅Ru₁₅/OMC catalyst showed the highest catalytic enhancement compared to Pt/OMC for the steady-state electrooxidation of methanol at 60 °C and 0.5 V, by a factor of 22 in 2-M MeOH solution. DMFC single cells yielded an open-circuit voltage of 0.625 V at 60 °C. Polarization curves indicate that DMFC with OMC-supported Pt₈₅Ru₁₅ catalyst at the anode exhibited the best performance.     

Nickel‐Catalyzed Cross‐Coupling of Redox‐Active Esters with Boronic Acids

A transformation analogous in simplicity and functional group tolerance to the venerable Suzuki cross‐coupling between alkyl‐carboxylic acids and boronic acids is described. This Ni‐catalyzed reaction relies upon the activation of alkyl carboxylic acids as their redox‐active ester derivatives, specifically N‐hydroxy‐tetrachlorophthalimide (TCNHPI), and proceeds in a practical and scalable fashion. The inexpensive nature of the reaction components (NiCl₂?6 H₂O—$9.5 mol^?1, Et₃N) coupled to the virtually unlimited commercial catalog of available starting materials bodes well for its rapid adoption.