Labile Interactions Defined in Crystalline Metal Complexes

The problems involved in identifying and quantifying labile interactions considered to influence complex compound structures are highlighted through the assessment of four different families of metal complexes for which extensive crystallographic data are available. Modification of the charge distribution within a ligand molecule as a result of coordination is one factor with a number of ramifications. A detailed analysis of evidence for both intra- and inter-molecular attractions in dimethylsulfoxide complexes of metal perchlorates is used to provide a basis for the consideration of weak interactions between complex ions involving forces including phenyl-group attractions, hydrogen bonding and cavity inclusion.     

Gas chromatographic optimization studies on the side chain and ring regioisomers of methylenedioxymethamphetamine

Gas chromatographic (GC) optimization studies are conducted for the 10 methylenedioxyphenethylamine regioisomeric substances related to the drug of abuse 3,4-methylenedioxymethamphetamine (MDMA, Ecstasy). These 10 compounds, having the same molecular weight and equivalent major mass spectral fragments, are not completely resolved using typical GC-mass spectrometry screening methods for illicit drugs. MDMA coelutes with at least one nondrug regioisomer under standard drug screening conditions. Separation of the 10 regioisomers is studied using stationary phases of varying polarities. Resolution optimization shows that very slow program rates give the best separation for the nonpolar stationary phases, requiring analysis times of as much as 85 min. Narrow-bore columns containing the same nonpolar stationary phases improve the analysis time to approximately 29 min. The polar stationary phase DB-35MS allows high-temperature programming rates, yielding complete resolution of all 10 compounds in less than 7 min. Temperature program optimization studies on the DB-35MS phase allow the separation time to be reduced to approximately 4.5 min.     

Vitamin B12 as an allosteric cofactor; dual fluorescence, hysteresis, oscillations and the selection of corrin over porphyrin

Studies of the emission spectra of four Co(III) cobinamides (diaquo-, aquohydroxo-, dihydroxo- and dicyano-) show (1) that the excited states corresponding to the alphabeta and epsilon absorption bands behave like the S(1) and S(2) levels in the non-alternant hydrocarbon azulene (with emission from S(2)> S(1) in violation of Kasha's rule) and (2) that the excited states include a TICT (twisted intramolecular charge transfer) mechanism, as in the simpler cyanines, but where the TICT state gives rise to dual fluorescence instead of cis-trans isomerisation. Combined with the previously reported dual fluorescence from the S(1) level in synthetic metal corrinoids and in the naturally-occurring metal-free corrin, this provides evidence that the existence of an additional (metastable) ground state with a significantly different vibronic splitting and nuclear configuration is an intrinsic property of the basic corrin ligand (irrespective of the nature of the side-chains and the metal ion or even the absence of a metal) which distinguishes it from porphyrin. The occurrence of hysteresis (and its associated oscillations) in redox reactions of the cobinamides involving both the Co(III/II) and Co(II/I) couples indicates that the corrin ligand also has an intrinsic ability to exist in different conformations or "allosteric" forms with differing redox potential, which further distinguishes it from the porphyrin ligand. Possible links between the existence of an additional metastable ground state and of allosteric changes and the likely reasons for the selection of corrin over a porphyrin for the vitamin B(12)-dependent enzymes are discussed.     

Systems-based design of bi-ligand inhibitors of oxidoreductases: filling the chemical proteomic toolbox

Genomics-driven growth in the number of enzymes of unknown function has created a need for better strategies to characterize them. Since enzyme inhibitors have traditionally served this purpose, we present here an efficient systems-based inhibitor design strategy, enabled by bioinformatic and NMR structural developments. First, we parse the oxidoreductase gene family into structural subfamilies termed pharmacofamilies, which share pharmacophore features in their cofactor binding sites. Then we identify a ligand for this site and use NMR-based binding site mapping (NMR SOLVE) to determine where to extend a combinatorial library, such that diversity elements are directed into the adjacent substrate site. The cofactor mimic is reused in the library in a manner that parallels the reuse of cofactor domains in the oxidoreductase gene family. A library designed in this manner yielded specific inhibitors for multiple oxidoreductases.     

Measurement of PCDDs, PCDFs, and non-ortho-PCBs by comprehensive two-dimensional gas chromatography-isotope dilution time-of-flight mass spectrometry (GC x GC-IDTOFMS)

Comprehensive two-dimensional gas chromatography with isotope-dilution time-of-flight mass spectrometry (GC × GC-IDTOFMS) was used to measure polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF), and coplanar polychlorinated biphenyl (cPCB) concentrations in ash, sediment, vegetation, and fish samples. The GC × GC capability was achieved by using a quad jet, dual stage, thermal modulator. Zone compression of the GC peaks from modulation resulted in a significant increase of the signal intensity over classical GC-IDTOFMS. The GC × GC column set used an Rtx-Dioxin 2 phase as the first dimension (¹D) and an Rtx-500 as the second dimension (²D). The chromatographic separation of the 17 PCDD/Fs and the 4 cPCBs was attained in ¹D except for 2,3,7,8-TCDD and CB126 for which deconvoluted ion currents (DIC) were required to be reported separately. The Rtx-500 phase separated the bulk matrix interfering compounds from the target analytes in ²D. The instrumental limit of detection (iLODs) was 0.5 pg for 2,3,7,8-TCDD. The calibration curves showed good correlation coefficients for all the compounds investigated in the concentration range of 0.5–200 pg. GC × GC-IDTOFMS results compared favorably to those from conventional isotope-dilution one-dimensional gas chromatography-high resolution mass spectrometry (GC-IDHRMS). The comprehensive mass analysis of the TOFMS further permitted the identification of other contaminants of concern in the samples.     

Calixarenes as Polyhapto-aromatic Ligands: Alkali Metal Ions and Sulfonated Calixarenes

Crystal structure determinations for the hexarubidium and octacesium derivatives of calix[6]arene hexasulfonic acid, as well as of a new solvate of the pentasodium derivative of calix[4]arene tetrasulfonic acid, and comparison with structural data from the literature for alkali metal complexes of sulfonated calixarenes, have provided further evidence for the importance of interactions with aromatic ~ -electrons for the heavier alkali metal cations. There is evidence as well that this interaction can be enhanced by extended ionization of the sulfonated calixarene.     

The Catalytic Oxidative Coupling of Methane

One of the great challenges in the field of heterogeneous catalysis is the conversion of methane to more useful chemicals and fuels. A chemical of particular importance is ethene, which can be obtained by the oxidative coupling of methane. In this reaction CH₄ is first oxidatively converted into C₂H₆, and then into C₂H₄. The fundamental aspects of the problem involve both a heterogeneous component, which includes the activation of CH₄ on a metal oxide surface, and a homogeneous gas-phase component, which includes free-radical chemistry. Ethane is produced mainly by the coupling of the surface-generated CH radicals in the gas phase. The yield of C₂H₄ and C₂H₆ is limited by secondary reactions of CH radicals with the surface and by the further oxidation of C₂H₄, both on the catalyst surface and in the gas phase. Currently, the best catalysts provide 20% CH₄ conversion with 80% combined C₂H₄ and C₂H₆ selectivity in a single pass through the reactor. Less is known about the nature of the active centers than about the reaction mechanism; however, reactive oxygen ions are apparently required for the activation of CH₄ on certain catalysts. There is spectroscopic evidence for surface O^? or O ions. In addition to the oxidative coupling of CH₄, cross-coupling reactions, such as between methane and toluene to produce styrene, have been investigated. Many of the same catalysts are effective, and the cross-coupling reaction also appears to involve surface-generated radicals. Although a technological process has not been developed, extensive research has resulted in a reasonable understanding of the elementary reactions that occur during the oxidative coupling of methane.     

Composition of the essential oil of wild growing Artemisia vulgaris from Erie, Pennsylvania

Essential oil from wild growing Artemisia vulgaris L. originating in Erie, Pennsylvania was obtained by hydrodistillation of the aerial parts of the plant. Gas chromatographic-mass spectral analysis was used to identify the major volatiles present. Up to 22 components were detected in the essential oils. Germacrene D (25%), Caryophyllene (20%), alpha-Zingiberene (15%) and Borneol (11%) represent the major components of leaf oil, while the buds were rich in 1,8-Cineole (32%), Camphor (16%), Borneol (9%), and Caryophyllene (5%). trans-2-Hexenal was also detected in the aerial parts of the plant. alpha-Zingiberene and trans-2-Hexenal have not been previously reported for Artemisia vulgaris L. The major analytes are compared to those from Artemisia vulgaris L, originating outside of the United States.     

A self-loading microfluidic device for determining the minimum inhibitory concentration of antibiotics

This article describes a portable microfluidic technology for determining the minimum inhibitory concentration (MIC) of antibiotics against bacteria. The microfluidic platform consists of a set of chambers molded in poly(dimethylsiloxane) (PDMS) that are preloaded with antibiotic, dried, and reversibly sealed to a second layer of PDMS containing channels that connect the chambers. The assembled device is degassed via vacuum prior to its use, and the absorption of gas by PDMS provides the mechanism for actuating and metering the flow of fluid in the microfluidic channels and chambers. During the operation of the device, degas driven flow introduces a suspension of bacterial cells, dissolves the antibiotic, and isolates cells in individual chambers without cross contamination. The growth of bacteria in the chambers in the presence of a pH indicator produces a colorimetric change that can be detected visually using ambient light. Using this device we measured the MIC of vancomycin, tetracycline, and kanamycin against Enterococcus faecalis 1131, Proteus mirabilis HI4320, Klebsiella pneumoniae, and Escherichia coli MG1655 and report values that are comparable to standard liquid broth dilution measurements. The device provides a simple method for MIC determination of individual antibiotics against human pathogens that will have applications for clinical and point-of-care medicine. Importantly, this device is designed around simplicity: it requires a single pipetting step to introduce the sample, no additional components or external equipment for its operation, and provides a straightforward visual measurement of cell growth. As the device introduces a novel approach for filling and isolating dead-end microfluidic chambers that does not require valves and actuators, this technology should find applications in other portable assays and devices.