巴旦杏中脂肪酸的测定

采用气相色谱仪进行定量分析，气－联质联用仪进行定性分析，巴旦杏中脂肪酸进行了测定，并探讨了样品处理方法和气－质联用仪的分析条件，得到了较为满意的分析结果。     

用参考圆法演示简谐振动

对受迫振动仪进行了改进，通过参考圆法，演示了作镁速圆周运动的质点在直径方向上的投影所作的运动为简谐振动。     

微纳米加工技术在纳米物理与器件研究中的应用

物质在纳米尺度下可能呈现出与体材料不同的物理特件，这正是纳米科技发展的基础之一。要想探索在纳米尺度下材料物埋性质的变化规律及可能的应用领域，离不开相应的技术手段，微纳米加工技术作为当今高技术发展的重要技术领域之一，是实现功能人工纳米结构与器件微纳米化的基础。本文根据几个不同的应用领域，介绍了微纳米加工技术在纳米物理与器件研究领域的应用。     

AFC^＊一代数上的映射

本文讨论AFC^＊一代数中的一些映射的线性性质和它们的局部性质之间的关系．研究AFC^＊一代数A上的保持乘法的局部自同构Ф在A中矩阵单位系上的作用。证明了Ф是A上的自同构。对于UHF代数上满等距的结构，还证明了UHF代数上的2-局部（满线性）等距是线性的．     

差分流线扩散法的局域稳定性分析

本文讨论差分流线扩散法的局部稳定性分析，在理论上证明了该方法依旧保持着流线扩散法扰动局部影响的特性。     

BEPCⅡ高频发射机和环流器的调整和测试

北京正负电子对撞机升级改造工程(BEPCⅡ)将采用的频率500MHz、输出功率250kW的高频发射机和环流器已安装、调整、测试和验收完毕,这是国内建立的第一套500MHz/250kW发射机系统.本文将详细介绍机器的调测试的原理和各项测量内容及结果, 并比较设计指标和要求,来阐述此发射机的实际技术指标和测试性能.     

灰色Verhulst模型的样条插值函数的残差修正

本用样条函数对灰色Verhulst模型的残差序列进行插值拟合，然后作用于二阶线性微分方程，并以此修正原模型，得到一种新的预测模型的数值解，提高了拟合的精确度。     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

Endpoint estimates for certain commutators of fractional and singular integrals

In this paper, the authors obtain the endpoint estimates for a class of non-standard commutators with higher order remainders and their variants. Moreover, the authors show that these operators are actually not bounded in certain cases.

     

聚苯硫醚／石墨基双极板复合材料性能的研究

以聚苯硫醚树脂和人造石墨为原料一次模压成型制备双极板复合材料.研究了模压成型过程中加压时机、冷却方式及人造石墨原料对复合材料电导率和弯曲强度的影响.结果表明,制备聚苯硫醚/石墨基双极板材料宜选用石墨化程度较高且结构密实的石墨粉料;采用保温后加压及空气中冷却方式制备的复合材料的综合性能较优.